• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.101-106
• /
• 2016

This paper proposes the SU-SE-MMA algorithm which applying the concept of selective updaing to the SE-MMA that is possible to reduce the intersymbol interference due to distortion occurred at the channel when transmit the nonconstant modulus 16-QAM signal. The SE-MMA emerged for the simplifying the computational operation from the current MMA adaptation algorithm, then it's has the fast convergence speed and has a problem of increase the residual component in the steady state. The SU-SE-MMA performs the selectively tap updating when the distance of equalizer output and specified transmit signal point is greater than the given threshold value and tap updaing does not occurred in the small distance. By this selective updating process, it is possible to more reduction in the computational operation in the propose algorithm. The improved adaptive equalization performance of SU-SE-MMA like as the equalizer output signal constellation, residual isi, MD, SER were confirmed by computer simulation compared to SE-MMA. As a result of simulation, the AV-SE-MMA has better performance in output signal constellation, residual isi and MD compared to the SE-MMA, but it was confirmed that the AV-SE-MMA has similar in the SER performance that means the robustness to the noise.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.353-366
• /
• 2014

The purpose was to describe the state of healthcare-associated infection(HAI) control. Data were collected from 134 hospitals. The questionnaire developed by Kang[8] were modified. The mean of hospital beds was 556.4, 26.9% of hospitals were less than 300 beds. 99.3% of hospitals had infection control committee(ICC). ICC met 3.4 times a year. 54.5% of hospitals had one infection control practitioner(ICP). 95.5% of ICPs were nurse, 48.7% of ICPs had more than master's degree. Hospital experience of ICPs was 13.5 years. ICP experience was 3.2 years. 30.8% of ICPs worked for less than 1 year. All hospitals investigated HAI, 75.4% performed improvement activities. There are significant differences in existence of ICD, negative pressure room, computer program, numbers of ICPs according to hospital size. Manpower, organization, and facilities lacked in less than 300 beds. This conclusions will give baseline data to establish infection control system, manpower and practice in small-medium hospitals.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.6
• /
• pp.37-48
• /
• 2005

The efficiency of power supply circuits such as DC-DC converters and batteries varies on the trend of the power consumption because their efficiencies are not fixed. To analyze the efficiency of power supply circuits, we need the temporal behavior of the power consumption of the loads, which is dependent on the activity factors of the devices during the operation. Since it is not easy to model every detail of those factors, one of the most accurate power consumption analyses of power supply circuits is measurement of a real system, which is expensive and time consuming. In this paper, we introduce an active load emulator for embedded systems which is capable of power measurement, logging, replaying and synthesis. We adopt a pattern recognition technique for data compression in that long-term behaviors of power consumption consist of numbers of repetitions of short-term behaviors, and the number of short-term behaviors is generally limited to a small number. We also devise a heterogeneous structure of active load elements so that low-speed, high-current active load elements and high-speed, low-current active load elements may emulate large amount and fast changing power consumption of digital systems. For the performance evaluation of our load emulator, we demonstrate power measurement and emulation of a hard drive. As an application of our load emulator, it is used for the analysis of a DC-DC converter efficiency and for the verification of a low-power frequency scaling policy for a real-time task.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.9
• /
• pp.91-102
• /
• 1999

It is known that the digital image enlargement technique which only uses spatially neighbored pixels information in a still image can increase the size of the image but the practical enhancement of resolution is small because the frequency bandwidth of the image is basically limited. To solve this problem, this paper proposes the digital image enlargement technique that improves the reconstruction of the edge components by selectively transposing the direction of the subwindows of pseudomedian filter according to the distribution of neighbored pixels to the interpolation point. The pseudomedian filter has the better performance in aspect of the reconstruction of edge information when the pixel values masked by two subwindows parallel to the interpolation point are very similar and the pixel values masked by another subwindow that is orthogonal to the above two subwindows are similar to each other. In this paper, the computer simulation for digital image enlargement was performed with consideration of these characteristics when selecting the subwindows of pseudomedina filter. Based on this simulation result, the performance of the proposed method was analysed and its effectiveness was assessed. According to the proposed method, visual artifacts that result from using the limited samples can be effectively suppressed, and most characteristics and shapes of the original image can be preserved as well.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.90-102
• /
• 2011

Recently, the grade of users using wireless communication services which transmits and re-transmits to the signal via the broadcasting satellite have a variety. However the ships not preparing of H.264 standard devices should not received the realtime data because the broadcasting stations have transmitted the compressed video data through the satellite communication. Therefore this paper proposes H.264 to MPEG-2 transcoding for the ships using MPEG-2 devices. Proposed method improves a speed and object quality in H.264 to MPEG-2 transcoding by analysis features of macroblock modes in H.264. In the Intra mode of P-frame, it proposes new method by computing coincidence proportion after comparing of Intra mode methods of H.264 and MPEG-2. In the Inter mode, it proposes a PMV(predictive motion vector) considering movement of motion vectors in H.264 decoder. we reuses a PMV directly as like the final MV in MPEG-2 encoder and refinements the MV after coincidence ratio comparing of variable motion vectors of H.264 and these of MPEG-2. The experimental results from proposed method show a considerable reduction in processing time, as much as 70% and 67% respectively, with a small objective quality reduction in PSNR.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.6
• /
• pp.470-477
• /
• 2017

As a method of the transmission efficiency improvement of an aperture smaller than the wavelength, we modified the conventional H-shaped resonant aperture to lower the resonance frequency of resonant aperture, and the transmission efficiency of resonant aperture was improved more than the conventional aperture. The maximum transmission cross section(TCS) calculated using the equivalent circuit tends to be almost equal to the maximum TCS from the small resonant aperture modified to improve the transmission efficiency. The transmission characteristics of resonant apertures can be quantified as the TCS, and the transmission efficiency of that can be compared. The modified resonant aperture has a maximum TCS increased by about 2.87 times from $846mm^2$ to $2,431mm^2$ compared to the H-shaped aperture, and the resonant frequency decreased from 5.06 GHz to 2.92 GHz, and the length-to-wavelength ratio of the aperture was reduced from 0.178 to 0.103.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.9
• /
• pp.293-300
• /
• 2014

TDMA(Time Division Multiple Access) is a channel access scheme for shared medium networks. The shared frequency is divided into multiple time slots, some of which are assigned to a user for communication. Techniques for TDMA can be categorized into two classes: synchronous and asynchronous. Synchronization is not suitable for small scale networks because it is complicated and requires additional equipments. In contrast, in DESYNC, a biologically-inspired algorithm, the synchronization can be easily achieved without a global clock or other infrastructure overhead. However, DESYNC spends a great deal of time to complete synchronization and does not guarantee the maximum time to synch completion. In this paper, we propose a lightweight synchronization scheme, C-DESYNC, which counts the number of participating nodes with GP (Global Packet) signal including the information about the starting time of a period. The proposed algorithm is mush simpler than the existing synchronization TDMA techniques in terms of cost-effective method and guarantees the maximum time to synch completion. Our simulation results show that C-DESYNC guarantees the completion of the synchronization process within only 3 periods regardless of the number of nodes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.756-761
• /
• 2016

The objective of this study is to design and manufacture a fuel pump with the plunger diameter of 4 mm and stroke of 7 mm that can be mounted in a small single-cylinder four-stroke agricultural diesel engine, and to investigate the performance characteristics of the pump. The combustion pressure in a cylinder was reproduced by forming the back pressure of 1, 6, 11, 16 and 21 bar with a nitrogen gas in the home-manufactured modeling cylinder. In the experiment, the discharge pressure was measured at the spot of 1 cm away from the discharge port of a developed fuel pump. The delivery pressure and delivery flow rate were measured at the spot of 30 cm away from the discharge port of the pump, and the pump efficiency was calculated. The pump motor speed was changed from 600 to 800, 1000, 1200 and 1400 rpm. It is found that the delivery feed rate of fuel pump is increased as the rotational speed is raised, and is decreased as the back pressure, compression pressure in the cylinder, is increased. Also, the pump efficiency is reduced as the rotational speed and back pressure are increased.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.89-94
• /
• 1998

To make practical application of the MR image for stereotactic radiosurgery, the target point-achieved by acquisition of MR image in stereotactic radiosurgery planning system must agree with the actual isocenter of irradiation in real treatment. And the amount of distortion of the MR image must be known to make a correction for the agreement. A radish containing abundant water content was chosen as a homogeneous phantom for the purpose of verification of the agreement in this experiment. A dosimetric film was firmly attached to the small specially fabricated acryl plate and needle puncture was made through the film just into the acryl plate and a drop of oil was dropped into the hole of the film. The acryl plate with film was inserted into the radish and the dorp of oil represented the target point in MR image. After the image acquisition by stereotatic radiosurgery planning system, we achieved stereotactic coordinate of the target point represented by the oil drop. And we proceeded to actual irradiation to the target point according to the procedure of stereotactic radiosurgery. After the irradiation, the film in the radish was developed and processed and the degree of coincidence between the center of the radiation distribution and the target point represented by the hole in the film was measured. The discrepancy between two points was under 0.5 mm. so we could confirm good coincidence in homogeneous phantom such as radish. On the other hand, authors tried to use our home-made device for estimation of distortion of MR image.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.33-42
• /
• 2005

In this paper, we propose an efficient segmentation algerian using morphological grayscale reconstruction for region-based coding. Each segmentation stage consists of simplification, marker extraction and decision. The simplification removes unnecessary components to make an easier segmentation. The marker extraction finds the flat zones which are the seed points from the simplified image. The decision is to locate the contours of regions detected by the marker extraction. For the simplification, we use a new connected operator based on the size and contrast. In the marker extraction stage, the regions reconstructed to original values we excluded from the candidate marker. For the other regions, the regions which are larger than structuring elements or have higher contrast than a threshold value are selected as markers. For the initial segmentation, the conventional hierarchical watershed algorithm and the extracted markers are used. Finally in the region merging stage, we propose an efficient region merging algorithm which preserves a high quality in terms of the number of regions. At the same time, the pairs which have higher contrast than a threshold are excluded from the region merging stage. Experimental results show that the proposed marker extraction method produces a small number of markers, while maintaining high quality and that the proposed region merging algorithm achieves a good performance in terms of the image quality and the number of regions.