• 제목/요약/키워드: Small channel

검색결과 1,296건 처리시간 0.032초

기저대역 채널선택 필터를 위한 전압 안정화 회로 (Voltage regulator for baseband channel selection filters)

  • 김병욱;김대익
    • 한국전자통신학회논문지
    • /
    • 제8권11호
    • /
    • pp.1641-1646
    • /
    • 2013
  • 기저대역 채널선택 필터는 외부의 잡음이나 공정상의 변화에 따라 각각의 통신 채널을 선택하기 위해 인가되는 제어 전압이 변동될 수 있다. 본 논문에서는 제어 전압을 일정하게 유지시키기 위해, 전류의 흐름을 감지하여 채널선택 필터의 차단주파수가 자동으로 조정되어 필터 동작이 원활하게 유지되면서 최소 면적을 갖는 전류 비교 방식 전압 안정화 회로를 설계하였다.

CMOS Compatible Fabrication Technique for Nano-Transistors by Conventional Optical Lithography

  • Horst, C.;Kallis, K.T.;Horstmann, J.T.;Fiedler, H.L.
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제4권1호
    • /
    • pp.41-44
    • /
    • 2004
  • The trend of decreasing the minimal structure sizes in microelectronics is still being continued. Therefore in its roadmap the Semiconductor Industries Association predicts a printed minimum MOS-transistor channel length of 10 nm for the year 2018. Although the resolution of optical lithography still dramatically increases, there are known and proved solutions for structure sizes significantly below 50 nm up to now. In this work a new method for the fabrication of extremely small MOS-transistors with a channel length and width below 50 nm with low demands to the used lithography will be explained. It's a further development of our deposition and etchback technique which was used in earlier research to produce transistors with very small channel lengths down to 30 nm, with a scaling of the transistor's width. The used technique is proved in a first charge of MOS-transistors with a channel area of W=200 nm and L=80 nm. The full CMOS compatible technique is easily transferable to almost any other technology line and results in an excellent homogeneity and reproducibility of the generated structure size. The electrical characteristics of such small transistor will be analyzed and the ultimate limits of the technique will be discussed.

국내 유역특성을 반영한 한계유출량 산정기법 개발 및 평가 (Development and Evaluation of Computational Method for Korean Threshold Runoff)

  • 조배군;지희숙;배덕효
    • 한국수자원학회논문집
    • /
    • 제44권11호
    • /
    • pp.875-887
    • /
    • 2011
  • 본 연구에서는 우리나라에 적합한 한계유출량 산정기법을 제안하고 이를 평가하고자 한다. 대상유역은 한강유역이며, 유역의 하도구간을 산지소하천 자연하도, 인공하도 그리고 본류하도의 3구간으로 구분하였다. 산지소하천의 경우 산지계곡의 야영객 및 등산객들의 피해를 방지하기 위해 0.5 m 수위상승을 기준으로 한계유출량을 산정하였다. 산지소하천 자연하도의 한계유출량은 유역 및 하도 매개변수 간의 지역적 회귀분석을 통해 소유역별 한계유출량을 계산하였다. 산지소하천 인공하도의 경우에는 유역 및 하도특성인자들의 지점정보를이용하여 지점별 한계유출량을 산정하였다. 반면 하천 본류구간에서는 고수부지를 이용하는 이용객들의 인명피해를 방지하고자 하천본류구간의 경계홍수량을 기준으로 지점별 한계유출량을 산정하였다. 산정된 한계유출량의 검증을 위해 3개의 돌발홍수사례를 수집하였으며, SCS 유효우량 방법을이용하였다. 지속시간 1, 3, 6시간에 해당하는 유효우량이 한계유출량보다 상회하는 값을 지닌 것으로 나타나 본연구에서 제시한 한계유출량 산정방법이 적절한 것으로 판단된다.

Optional Tariffs for Channel Coordination

  • Song, Jae-Do
    • Asia Marketing Journal
    • /
    • 제14권3호
    • /
    • pp.49-68
    • /
    • 2012
  • When a channel is vertically separated, there can be inefficiencies, double marginalization. Channel coordination to amend this inefficiency has been an important issue in marketing and economics. Channel coordination deals with maximization of joint profit and achieving proper profit sharing among participants. In this paper, a manufacturer and heterogeneous multiple retailers with exclusive territory are assumed, and channel coordination with two-part tariff is considered. When multiple heterogeneous retailers are assumed, profit sharing can be an issue even though the tariffs based on marginal cost can maximize joint profit. In case of multiple heterogeneous retailers, the manufacturer earns the same profit (fixed fee) from each retailer. This means that a large retailer occupies all the gaps of channel profit between small and large markets. Then, the manufacturer, which generally plays the role of Stackelberg leader, will consider increasing fixed price or marginal price to earn more profit from large retailer. Those reactions can sacrifice maximization of joint profit by making small retailer withdraw or by changing the sales quantities. In this paper, to maximize joint profit and achieve proper profit sharing, two kinds of optional tariffs are considered. The first is an optional two-part tariff based on marginal cost and the second is an optional modified two-part tariff in which marginal prices are higher than the manufacturer's marginal cost. In both types of optional tariffs, maximization of joint profit in each market can be achieved. Moreover, optional tariffs alleviate the problem of profit sharing. Optional tariffs can provide a manufacturer more profit from a large retailer when profit from a small retailer is given. However, the analysis shows that the maximum share of manufacturer from a large retailer is restricted by the condition for self-selection. In case of optional two-part tariffs based on marginal cost, if the gap between demands is large, the maximum share of the manufacturer is sufficient to achieve proper profit sharing. If the gap between demands is not sufficiently large, the manufacturer cannot earn sufficient share from increased profit. An optional modified two-part tariff where marginal price is more than marginal cost of manufacturer is considered because of this scenario. The marginal price above the marginal cost may additionally control the distribution of the increased profit. However, the analysis shows that a manufacturer's maximum profit from a large retailer with given profit from a small retailer is the same as or lower than the maximum profit when optional two-part tariffs based on marginal cost are applied. Therefore, it can be concluded that the optional modified tariffs do not have additional contribution to profit sharing relative to the tariffs based on marginal cost. Although this paper does not cover all kinds of optional tariffs that are different from tariffs based on marginal cost, it shows the advantage of optional tariffs based on marginal cost and has important theoretical implications. The result of this paper also gives guide for channel coordination. Optional two-part tariff based on marginal cost can increase efficiency in channel coordination.

  • PDF

OFDM 시스템에서 상호상관을 이용한 파일럿 심볼 기반 채널 추정 성능 향상 기법 (A Modified Pilot Symbol based Channel Estimation Technique Using Cross-Correlation for OFDM Systems)

  • 위정욱;조용수
    • 한국통신학회논문지
    • /
    • 제36권7C호
    • /
    • pp.467-474
    • /
    • 2011
  • 직교 주파수 분할 다중화(Orthogonal Frequency Division Multiplexing; OFDM) 시스템에서 주로 사용되는 파일럿을 이용한 상호상관 채널 추정기법은 시스템의 전송 효율을 증가시키기 위해 적은 수의 파일럿 심볼을 사용 할 경우 채널 추정 성능이 저하된다. 본 논문에서는 파일럿 심볼 기반의 OFDM 시스템에서 적은 수의 파일럿 심볼을 사용하여 채널 추정 성능을 향상시킬 수 있는 파일럿 심볼 기반 상호상관 채널 추정기법을 제안한다. 제안된 기법은 파일럿 심볼을 이용하여 채널을 추정한 후 임시 데이터 심볼을 검출하고, 검출된 데이터 심볼과 파일럿 심볼을 이용하여 채널을 추정한다. 모의실험을 통해 제안된 기법의 성능을 확인하고, 기존 기법에 비해 우수한 성능을 나타내는 것을 보인다.

COMS 센서 데이터 송수신 채널 시스템 설계 (Channel Design of COMS Sensor Data Transmitter and Receiver System)

  • 김영완
    • 한국정보통신학회논문지
    • /
    • 제11권3호
    • /
    • pp.444-451
    • /
    • 2007
  • 본 논문에서는 통신해양기상위성(COMS)의 기상 및 해양 과학 관측 센서 데이터 서비스를 제공하는 지상 지구국 채널 시스템의 설계 요소를 해석하고, 소형 사용자 단말 장비의 적합한 설계를 위한 채 널 설계 파라미터를 제안한다. 통신해양기상위성의 해양 관측 데이터는 S/L-band를 사용하여 지상으로 전송되며, 기상 관측 데이터는 지상으로 전송되고, 전송된 데이터는 지상국에서 수신 처리되어 COMS 위성을 통하여 사용자에게 제공된다. 디지털 방식으로 전송되는 센서 데이터는 양방향 소형 단말기의 채널을 통하여 수신되므로 센서 데이 터 전송 방식에 대한 요소 기술적 분석과 전송 채널 모델링을 통한 채널 열화 요소를 분석하여 최적의 센서 데이터 송수신 채널 시스템을 해석하고 설계한다.

Channel-fill Deposits of Gravel-bed Stream, Southeastern Eumsung Basin (Cretaceous), Korea

  • Ryang, Woo-Hun
    • 한국지구과학회지
    • /
    • 제27권7호
    • /
    • pp.757-767
    • /
    • 2006
  • Alluvial-plain deposits in the southeastern part of the Eumsung Basin (Cretaceous) are characterized by coarse-grained channel fills encased in purple siltstone beds. It represents distinct channel geometry, infill organization, and variations in facies distribution. The directions of paleocurrent, sedimentary facies changes, and channel-fill geometry can be used to reconstruct a channel network in the alluvial system developed along the southeastern margin of the basin. The channel-fill facies represent downstream changes: 1) down-sizing and well-sorting in clast and martix of channel fills and 2) internal organization of scour fill or gravel lag and overlying cross-stratified, planar-stratified beds. These findings suggest multiple stages of channel-filling processes according to flooding and subsequent stream flows. In the small-scale pull-apart Eumsung Basin (${\sim}7{\times}33km^2$ in area), vertical-stacked alluvial architecture of the coarse-grained channel fills encased in purple siltstone is expected to result from episodic channel shifting under a rapidly subsiding setting.

우리나라 소하천의 수문지형학적 특성 및 계획하폭 결정에 관한 연구 (A Study on Hydrologic and Geographic-Characteristics and Design-Width-Determination of Small Rivers in Korea)

  • 이동률;이주헌;최성욱;정상만
    • 대한토목학회논문집
    • /
    • 제11권3호
    • /
    • pp.67-73
    • /
    • 1991
  • 소하천의 효율적 관리 및 개수를 위하여 우리나라의 소하천에 대한 수문지형학적 자료를 조사 분석하여 소하천의 범위를 제시하고 이들 소하천의 특성을 파악하였다. 그리고 소하천 개수시에 계획하폭을 결정하기 위한 지표로 제시하고 있는 기존 계획하폭 결정공식의 문제점올 검토하고 새로운 계획하폭 결정공식을 제시하였다. 연구의 결과로서 우리나라 소하천의 유역면적은 $10km^2$ 이하, 유로연장은 6 km 이하, 하상경사는 0.02 이상으로 매우 급경사이며, 홍수도달시간은 30분 이내로 나타났다. 그리고 제시된 새로운 계획하폭 결정공식은 계획홍수량 $300m^3/sec$ 이하의 소하천에 적용할 수 있는 $B=1.235Q^{064}$와 유역면적 $10km^2$ 이하에서 적용할 수 있는 $B=8.794A^{0.56}$이다.

  • PDF

폐쇄형 접속 방식의 소형셀 네트워크를 위한 동적 채널 할당 알고리즘 (Dynamic Channel Allocation in Closed-Access Small Cell Networks)

  • 문철;조한신
    • 한국통신학회논문지
    • /
    • 제39A권1호
    • /
    • pp.50-61
    • /
    • 2014
  • 기존 매크로셀 내에 소형셀을 추가하여 전체 시스템의 용량을 개선하는 연구에 대한 관심이 높다. 소형셀에 허가된 사용자만 접속할 수 있는 폐쇄형 접속 방식의 경우, (동일한 주파수 채널을 사용하는) 인접한 매크로셀 사용자의 성능저하가 불가피 하다. 본 논문에서는 빌딩 내에 다수의 소형셀 기지국이 분포하는 환경에서, 해당 빌딩에 인접한 매크로셀 사용자의 성능저하를 우선적으로 최소화하며, 다음으로 빌딩 내 소형셀 기지국 간의 간섭전력을 최소화하는 동적 주파수 채널 할당 알고리즘을 제안한다. 매크로셀 내 빌딩(소형셀)의 위치에 따라 인접한 매크로셀 사용자가 겪는 간섭전력이 변한다. 제안하는 알고리즘을 통해 소형셀은 이러한 위치에 따른 간섭영향의 변화에 적응적으로 스스로 주파수 채널을 선택할 수 있다. 소형셀이 시간에 따른 주변 간섭환경의 변화에 따라 최적의 주파수 채널을 할당할 수 있는 간단하고 실용적인 방법을 제안했다는 것이 본 연구의 가장 큰 기술적 기여이다. 모의실험을 통해 제안한 채널 할당 기법은 매크로셀의 성능개선에 효과적이며, 소형셀은 달성 가능한 최대 처리용량 대비 최대 81%를 제공할 수 있음을 확인하였다.

ISO 19848 데이터 채널 표현과 선박 기관장비 고장·유지보수 유형 관리를 위한 코드화 기법 (An Encoding Method for Presentation of ISO 19848 Data Channel and Management of Ship Equipment Failure-Maintenance Types)

  • Hwang, Hun-Gyu;Woo, Yun-Tae;Kim, Bae-Sung;Shin, Il-Sik;Lee, Jang-Se
    • 한국정보통신학회논문지
    • /
    • 제24권1호
    • /
    • pp.134-137
    • /
    • 2020
  • Recently, there are emphasized to support the maintenance and management system of vessels using acquired data from engine part equipment. But, there are limitations for data exchange and management. To solve the problem, the ISO published ISO 19847 and 19848. In this paper, we analyze the ISO 19848 requirements related to identify data channel ID for ship equipment, and propose the examples for applying encoding techniques. In addition, we suggest the proposed technique for applying of managing the failure and maintenance type of the ship's engine part facilities by examples. If this method is applied, the vessel's equipment can exchange data through the sharing of the code table, and express what response is needed or acted, including where the failure occurred.