• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.2
• /
• pp.51-58
• /
• 1993

This paper describes the development of a speaker-dependent isolated word recognizer as applied to voice dialing in a car noise environment. for this purpose, several methods to improve performance under such condition are evaluated using database collected in a small car moving at 100km/h The main features of the recognizer are as follow: The endpoint detection error can be reduced by using the magnitude of the signal which is inverse filtered by the AR model of the background noise, and it can be compensated by using variants of the DTW algorithm. To remove the noise, an autocorrelation subtraction method is used with the constraint that residual energy obtainable by linear predictive analysis should be positive. By using the noise rubust distance measure, distortion of the feature vector is minimized. The speech recognizer is implemented using the Motorola DSP56001(24-bit general purpose digital signal processor). The recognition database is composed of 50 Korean names spoken by 3 male speakers. The recognition error rate of the system is reduced to 4.3% using a single reference pattern for each word and 1.5% using 2 reference patterns for each word.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.32
• /
• pp.267-279
• /
• 1994

The Ministry of Transportation forecasts that the total number of automobiles in use in 1997 will be increased to about 10 million units. Until now, with the increase of domestic demand for automobiles, the customers' complaints have been raised frequently in relation with insufficient supply of auto parts for the repair and maintenance. At the same time, the industry came to face with new problems such as customers' requests of auto makers' quality services. Until now there were not any statistics on the registration of car age for each car type. So, for the auto makers' efficient aftersales management a system for collecting registration statistics was developed, and it has attributed remarkably to the improvement of the aftersales services, through easy anticipation of the requirements of parts being used for not only the small-produced but the massproduced car types. And a systematic instrument useful for auto industry, transportation and policy on environment is provided by timely supply of various statistics to the industry.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.149-158
• /
• 2012

PURPOSES : This research is to evaluate the effects of zig-zag marking. METHODS : Based on the literature review, This research adopt Comparison Group method which was developed by Hauer. RESULTS : The findings are as follows. Effectiveness of treatment at all site 1.06, intersection 0.92, median bus lane 1.93, school zone 0.50, below 6-lane 0.48, above 6-lane 1.19, cat vs person 0.57, car vs car 1.36, car only 1.29. CONCLUSIONS : Though the analysis, it was founded that zig-zag marking on the small scale road(below 6-lane) and school zone contribute to reduce traffic accidents(effectiveness of the treatment : 0.50, 0.48). But the accidents at large scale road and median bus lane where installed zig-zag marking demonstrated negative result.(effectiveness of the treatment indicates exceed 1.0).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1293-1299
• /
• 2001

The purpose of this study is to analyze the effects of the parameters of the mass ratio of the car body and the bogie frame in railway rolling-stock for KT-23 type passenger vehicle. According to the results of simulation and the small scale car test. optimal condition was obtained for the mass ratio of the car body and the bogie frame. Also. it is usefull to improve the technology of the ride quality of passenger vehicle.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.65-74
• /
• 2010

This study aims at developing a method for estimating passenger car equivalency (PCE) values for various vehicle types that could be considered in estimating capacity and delay at intersections without traffic signals, especially at modern small 3-leg roundabouts. Unlike signalized intersections, the PCE value has not yet been treated explicitly in traffic operations involving unsignalized intersections. Both empirical and theoretical approaches for determining the PCE values at modern small 3-leg roundabouts were evaluated. As a result, the PCEs derived in this study were highly correlated with those of field measurements.

• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.11-20
• /
• 2006

LNG is a valuable fuel since it offers some environmental, energy security and economic benefits over diesel. It could be used mainly in heavy-duty trucks and buses. Car acceleration induces the slope angle of the liquid fuel in the tank. Slope angle changes the surface area wetted by liquid fuel and consequently heat leak to the tank. This research is a result of numerical simulation of the heat leak with the car acceleration to LNG tank. The "Pro-HeatLeak" Fortran program is developed and the verification test of the developed program is done. The difference between numerical results and calculated results from MathCad verification test is less than 0.07 percent. The smallest heat leak is correspond to the case without oscillation. For the high car acceleration the value of heat leak is greater than that for the small acceleration. The difference between maximum and minimum heat leak for 10 gallons of fuel vapor in the tank is about 10 percent.

• Wind and Structures
• /
• v.14 no.1
• /
• pp.55-70
• /
• 2011

This study investigates the design criteria required for wind barriers to protect vehicles running on an expressway under a high side wind. At the first stage of this study, the lateral deviations of vehicles in crosswinds were computed from the commercial software, CarSim and TruckSim, and the critical wind speeds for a car accident were then evaluated from a predefined car accident index. The critical wind speeds for driving stability were found to be 35 m/s for a small passenger car, yet 30 m/s for a truck and a bus. From the wind tunnel tests, the minimum height of a wind barrier required to reduce the wind speed by 50% was found to be 12.5% of the road width. In the case of parallel bridges, the placement of two edge wind barriers plus one wind barrier at center was recommended for a separation distance larger than 20 m (four lanes) and 10 m (six lanes) respectively, otherwise two wind barriers were recommended.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.163-164
• /
• 2013

Two-Way CAR-FERRY land and islands, islands to islands, the connection between sustainable marine transportation in conjunction with the increasing demand of tourists, according to the associated coastal maritime tourism and passenger transport has a role. Subsequent Two-Way CAR-FERRY and the increased ease of use due to berthing maritime accidents can be reduced. Two-Way CAR-FERRY as the draft (even) in the state on both sides of the propeller, because the propeller due to the small diameter, low speed forward flight by the reaction at the shaft and propeller damage can occur. Engine output accordingly, linear and torsional vibration reducer by, elastic coupling selection transverse vibration and shaft alignment (Shaft alignment) considering the shaft design (bearing size, width, thickness) and the primary drive shaft support portion of the hull structure of evaluated for quality.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.12
• /
• pp.3683-3693
• /
• 1999

Most recognition methods of car licence plate have difficulties concerning plate recognition rates and system stability in that restricted car images are used and good image capture environment is required. To overcome these difficulties, I proposed a new recognition method of car licence plates, in which both intensity variation and color information are used. For a captured car image, multiple candidate plate-bands are extracted based on the number of intensity variation. To have an equal performance on abnormally dark and bright Images. plate lightness is calculated and adjusted based on the brightness of plate background. Candidate plate regions are extracted using contour following on plate color pixels in oath plate band. A candidate region is decided as a real plate region after extracting character regions and then recognizing them. I recognize characters using template matching since total number of possible characters is small and they art machine printed. To show the efficiency of the proposed method, I tested it on 200 car images and found that the method shows good performance.

• Journal of Distribution Science
• /
• v.7 no.3
• /
• pp.49-69
• /
• 2009

With the proliferation of electronic commerce, online transactions have become a norm. Its enormous potential, however, can be truly realized if consumers feel comfortable facing invisible sellers over the Internet, a virtual business channel. Trust has been identified as a key component in many e-Commerce studies. The purpose of this study is to find out which factors play a major role in building buyer trust and how the build-up trust affects buyer's purchase intention in online used car transactions. Based on the information asymmetry, TAM (Technology Acceptance Model), and the trust theory, our research model includes factors such as a buyer's propensity-to-trust, institutional characteristics (inspection and warranty policy), word-of-mouth referral, perceived size, and perceived benefits as independent variables. The model also includes trust as a mediate variable, purchase intention as a dependent variable, and perceived quality risk as a moderate variable. The research model is tested by analyzing 448 sample data gathered from used car websites. The result shows that the trust has significant effects on the online purchase intention, and institutional characteristics have been identified as one of the most significant factors for trust building in used car websites. For those who perceive quality risk high, actual purchasing behavior occurs only when they have trust on the used car websites, indicating that trust plays a vital role as a mediate variable. This study suggests that buyer trust on the used car websites is important to increase buyer's online purchase behavior.