• 환경영향평가
• /
• 제21권4호
• /
• pp.567-572
• /
• 2012

This paper suggests the set-up plan of the assessment scope in road noise considering road characteristics with the prediction model of road noise. The RLS90 prediction model with some assumptions is used to establish the assessment scope of road noise. The main contents of the applied assumptions are smooth drive of cars, flat region, location of all noise sources in one lane, drive in design speed, and set-up of assessment scope according to traffic volume and car speed. The information of traffic volume to predict road noise is obtained by the distribution of small cars and full-sized cars in road. In this study, the total traffic volume in road is computed by adding the number of small cars to the conversion number of small cars, which means the number of small cars making the same noise as one full-sized car. The prediction result of road noise with the influence factor of traffic volume, car speed, distance between road and receiver is presented. The resultant assessment scope of road noise is obtained by combining road noise prediction data with the set-up standard of road noise assessment scope.

• 자동차안전학회지
• /
• 제12권2호
• /
• pp.7-13
• /
• 2020

Recently, there is a big issue of downsizing on brake system according to fuel efficiency and regenerative braking cooperation control. Especially, small cars have improved in a variety ways such as electric vehicle and smart car compared to previous small cars. So, small brake system is strongly required in the car industry. A new small brake system for light compact vehicles was proposed in this paper. For this system, the solid type disc and caliper were newly developed. And the important design factors were considered to reduce brake size. First, we calculated the temperature rise of disc through heat capacity formula and CAE analysis. Second, we analyzed the housing and carrier stiffness of caliper to select the reasonable condition. Finally, the superiorities of the developed brake system were verified by heat capacity, consumption liquid level, braking feeling, judder, wear test and regenerative braking cooperation control analysis. A developed brake system is expected to be useful for brake system of light compact platform.

• 자동차안전학회지
• /
• 제9권1호
• /
• pp.25-31
• /
• 2017

Small Overlap test decided on IIHS (Insurance Institute for Highway Safety) evaluates a robustness of the car body and a passenger injury protection. A current vehicle is satisfied with a robustness of the car body for Small Overlap test but not meet the requirements of passenger injuries because it is difficult to inquire into the actual state of injury mechanism for Small Overlap test. The study shows the new injury mechanism which represents the relation between a structure of the vehicle placed with the lift foot and the low extremity injury.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.328-329
• /
• 2009

Air-Damping Mount is proposed to compromise between performance and weight & cost. The design of Air-Damping Mount was based on the specification from the engine mounting system analysis of a small car. To verify it's feasibility, R&H test was done on the small car and it is proven that Air-Damping Mount shows the performance between hydraulic mount and rubber mount.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.135-141
• /
• 2005

Currently many safety assessment tests are conducted by crashing a vehicle against a rigid or deformable barrier. It is quite rational to evaluate crash performance of a vehicle in a barrier test in terms of vehicle stiffness and strength. However, there has been a lot of debate on whether barrier testing is a duplicate of real world crash collisions. One of the issues is car to car compatability. There are two essential subjects in compatability. One is partner-protection when crashing into another vehicle and the other is self-protection when struck by another vehicle. When considering a car to car frontal crash between a mini car and a large heavy car, it is necessary to evaluate human body stiffness of each vehicle. In this study, in order to evaluate the compatability of cars in car-to-car crashes, four tests were conducted. Test speed of each car is 48.3km/h, and the overlap of the mini and large car is $40\%$, and the overlap of the small cars is $100\%$. In all tests, only a drive dummy is used. The test results of the car to car crash test show that vehicle safety standard of mini car is not satisfied compared with large heavy car and HIC value of mini car is higher than large car. In this case observed that the relatively lower stiffness and weight of the mini car resulted in absorbing a large share of the total input energy of the system when crashed into the large heavy car.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1074-1079
• /
• 2011

This paper describes the influence on the nonlinear critical speed results of a specific railway vehicle depending on various constraint conditions. In the roller-rig tests, proper constraints are inevitable to safely hold the test vehicles. Particularly, the test results using KRRI roller-rig are more sensitive to constraint conditions because it is a kind of semi-full car type. In this study, nonlinear critical speed of specific vehicle with regards to several constraint cases were predicted by computational analysis and these results were compared to find the suitable constraint conditions. And also the deviation of semi-full car model from actual full car model was investigated. According to the bifurcation analysis, the nonlinear critical speed are dependent with the constraint condition and car-body yaw motion should be free to achieve more accurate results. And the difference between semi-full and full car model was so small that KRRI's semi-full car model are valid as long as the stability is concerned.

• 해양환경안전학회지
• /
• 제27권6호
• /
• pp.856-866
• /
• 2021

대기오염물질 감축에 대한 국제적인 인식이 높아짐에 따라 친환경 선박에 대한 수요가 증가하고 있어 각국에서 전기추진선박 개발을 활발하게 수행하고 있다. 현재 전기추진선박에 대해서는 주로 전기추진시스템 및 전동기 연구를 주로 수행하고 있으며, 선박 관점에서 전기추진시스템 및 배터리의 탑재를 고려한 국내 연안 차도선 개념설계 연구는 수행된 바가 없다. 본 연구에서는 배터리 차량 기반의 이동식 전원공급시스템을 주전원으로 하는 순수전기추진차도선의 개념설계 과정에서의 주요 고려사항에 대하여 검토하였다. 100척 이상의 국내 연안차도선의 제원을 분석하여, 요구사항 만족을 위한 선박의 주요제원 선정과 이동식 배터리 차량 탑재를 고려한 비손상, 손상 복원성능 검토를 수행하였고, 개념설계 과정에서 발생하는 문제의 원인분석을 통해 해결방안을 모색하였다.

• 한국자동차공학회논문집
• /
• 제19권4호
• /
• pp.137-145
• /
• 2011

This paper suggests possible rear body shape modifications of a passenger car for the improvement of aerodynamic performance, based on the CFD analysis results. YF SONATA, a passenger car of Hyundai Motors Company, plays a major role as the baseline car in this research. Representatively, three parts(trunk rear edge, side rear edge and rear undercover) are modified in a small range in order for the total outer shapes not to be changed enough so that the modified car is not considered different, compared with the baseline. Specifically, using computational fluid dynamics, aerodynamic drag reduction is accomplished maximally about 11% in this research. Finally, it is proved that although the range of changes of the rear body shapes of a passenger car is very strictly confined, by changing a small range of rear body shapes alone the enhancement of aerodynamic performance of a passenger car can be significantly accomplished.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.9-19
• /
• 2010

Every car manufacturer desires to reduce the new car development time spent in improving the safety, NVH, lightweight, reliability and environment friendly features of the car. Other considerations such as planning, exterior and interior styling, packaging, color, and material selection increase the complexity of the car design process. This paper proposes a personal DDP (Digital Design Process) to utilize the engineering analysis and design/styling software for car design. DDP can be efficiently used by a team of car research center or a studio with small number of engineers, helping ordinary engineers becoming ambidextrous in design as well as engineering applications. The concept model starts from idea sketch, rendering, and 3D surface model with CAS (Computer Aided Styling) to the final safety estimation by using proposed DDP based on engineering technology (CAD, CAE). The concept model proposed a hydrogen fuel cell sports coupe which could be available within next 10 years. The proposed DDP can not only reduce the new car development time but also be adapted into designing of varied products such as aircraft, yacht, electrical equipment and sports gear.

• Tuberculosis and Respiratory Diseases
• /
• 제59권6호
• /
• pp.679-683
• /
• 2005

저자들은 시야 결손 등의 시력 변화를 주 증상으로 내원한 환자에서 소세포 폐암과 이로 인한 부종양성증후군으로 동반된 암 관련 망막증을 진단하고 항암화학요법을 시행하여, 원발 병변의 부분 관해 보였으나, 시야 결손은 회복되지 않았던 1예를 경험하였기에 문헌 고찰과 함께 보고 하는 바이다.