• 한국생산제조학회지
• /
• 제26권2호
• /
• pp.205-213
• /
• 2017

In order to improve occupant protection in frontal crash, the IIHS introduced a small overlap frontal crash test in 2012. When the front corner of a car collides with another car or object, such as utility pole the test replicated the sequence of events. Because occupants move simultaneously forward and toward the side of the vehicle this test is challenging for some airbag and safety belt designs. In the small overlap frontal test, a car travels at 64 km/h toward a rigid barrier. A hybrid III dummy is positioned in the driver seat. 25% of the total width of the car strikes the barrier on the driver side. After review of small overlap frontal test protocol and overall rating, six run-throughs were performed according to the original test method.

• 한국소음진동공학회논문집
• /
• 제13권4호
• /
• pp.266-273
• /
• 2003

The purpose of this study is to obtain the effects of the parameters of the suspension system in railway rolling-stock for KT-23 type Passenger vehicle. According to the analysis and the small scale model car test. optimal condition was obtained for the stiffness ratio of secondary spring to primary spring of the suspension system and the mass ratio of the bogie frame to the car body. The analysis of the study shows that if the car body mass is increased or secondary stiffness Is lowered, the vertical vibration level is reduced and the passenger comfort can be improved. Especially, strong peaks are occurred in the frequencies corresponding to the rotational speed of driving axle and vehicle wheel. Hence, in order to obtain the dynamic characteristics through the small scale model car, the driving method of the vehicle on the test bench, rotational characteristics of the wheel and the natural modes of vehicle should be investigated and be modified.

• 한국산학기술학회논문지
• /
• 제14권6호
• /
• pp.3013-3022
• /
• 2013

SMART Highway 종방향 배리어 상위등급 SB5-B 대형차 충돌조건을 만족하면서 120km/h의 소형차충돌속도를 130km/h로 상향시킬 수 있는 가능성이 조사되었다. 실물 충돌시험의 결과에 Calibrate된 입력 변수를 적용한 컴퓨터 시뮬레이션을 통하여 120km/h 소형차 충돌속도에 대한 차량의 종방향(longitudinal)과 횡방향(transverse) 속도변화가 THIV 한계를 만족시킬 수 있도록 다양한 배리어 모델이 개선되었고 이 과정을 통해 결정된 배리어 모델이 SB5-B 실물충돌시험을 통과하였다. 통과된 배리어 모델 slip block-out 날개의 각도를 변화시키면서 120km/h 소형차 충돌속도의 상향가능성을 유한요소해석(FEA)을 통하여 조사하고 실물차량 충돌시험을 수행하였다. 소형차충돌속도 130km/h에 대한 표준시험 여건이 갖추어 진다면 소형차 충돌속도 130km/h로 상향시킬 수 있는 가능성이 높은 것으로 조사되었다.

• International Journal of Automotive Technology
• /
• 제7권6호
• /
• pp.715-720
• /
• 2006

This research investigates injury values and vehicle deformation for vehicle frontal crash compatibility. To investigate compatibility in an individual case, it is possible to impact two vehicles and evaluate the injury values and deformations in both vehicles. In this study, four tests were conducted to evaluate compatibility. A large and mini vehicle were subjected to a frontal car-to-car crash test at a speed of 48.3 km/h with an offset of 40%. An inclination car-to-car crash test using the large and small vehicle were conducted at 30 km/h at a $30^{\circ}$ angle. The results of the 48.3 km/h, car-to-car frontal crash revealed extremely high injury values on the chest and upper leg of the Hybrid III 50% driver dummy with seatbelt in the mini vehicle compared to the large vehicle. For the 30 km/h, car-to-car inclination crash, however, injury values in the small vehicle were 1.5 times higher compared to the large vehicle.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.91-99
• /
• 2013

Car cross beam made by aluminium for new car is designed for the substitution of steel and it can be verified the performance by computer simulations. The parts of car cross beam are designed to replace steel parts according to their manufacturing processes. At the first stage, the weight of the aluminium car cross beam can be reduced to 75% by comparing with that of steel car cross beam. But NVH performance of the aluminium car cross beam becomes slightly insufficient as compared with that of steel car cross beam. Taguchi method is adopted to optimize the design variables affecting NVH characteristics of car cross beam. New car cross beam is designed at the second stage by using these analysis results. Weight reduction can be obtained to 31.7% by design modification and material change of car cross beam in comparison with the original steel one. NVH characteristics of aluminium car cross beam become on an equal level with the steel car cross beam. By side impact analysis results, new car cross beam has higher performance as compared with the steel car cross beam.

• Journal of Mechanical Science and Technology
• /
• 제16권12호
• /
• pp.1613-1626
• /
• 2002

This paper presents hybrid control of an active suspension system with a full-car model by using H$\sub$$\infty$/ and nonlinear adaptive control methods. The full-car model has seven degrees of freedom including heaving, pitching and rolling motions. In the active suspension system, the controller shows good performance: small gains from the road disturbances to the heaving, pitching and rolling accelerations of the car body. Also the controlled system must be robust to system parameter variations. As the control method, H$\sub$$\infty$/ controller is designed so as to guarantee the robustness of a closed-loop system in the presence of uncertainties and disturbances. The system parameter variations are taken into account by multiplicative uncertainty model and the system robustness is guaranteed by small gain theorem. The active system with H$\sub$$\infty$/ controller can reduce the accelerations of the car body in the heaving, pitching and rolling directions. The nonlinearity of a hydraulic actuator is handled by nonlinear adaptive control based on the back-stepping method. The effectiveness of the controllers is verified through simulation results in both frequency and time domains.

• East Asian Economic Review
• /
• 제16권3호
• /
• pp.249-272
• /
• 2012

This paper examines how a Korean automobile firm price-discriminates between the Korean and the U.S. markets. We argue that a Korean automobile firm's pricing behavior depends on the differences in price elasticity over the segmented markets between the countries. Our findings are that differences in price elasticity may help explain why a medium-class car's price is higher in Korea than that in the U.S. while a small-sized car's price is higher in the U.S. than in Korea, which implies that a Korean automobile firm $3^{rd}$ degree price-discriminates on the same or similar products between Korea and the U.S. This type of $3^{rd}$ degree price discrimination differs from a typical home-bias effect (charging higher prices to domestic consumers) because a small-sized car which is produced domestically sells at higher price abroad. This finding can be added as a source that violates the law of one price.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.628-632
• /
• 2001

Experimental approach was investigated to improve gear rattle noise of a small car. During the development of a small car serious problem occurred inside the transmission gear units. The transmission was a carried over system from a less powered predecessor. Several components of suspicion were investigated, and applied to reduce rattle noise. In general, backlash, the assembly gaps, and the clutch disk rattle induce gear rattle noise. Above mentioned improvements were applied to reduce the noise, but still problem remained. Meanwhile, the temperature inside the gearbox was reported to be unusually high and the life of transmission oil quality deteriorated drastically, Temperature increment caused the large gap between the bearing outer diameter and the transmission housing. Large gap made the gear shaft assembly move intermittently and impact each other. The tighter control of the assembly gap allowed the rotating shafts smoothly and reduced the gear rattle noise even in the high temperature range.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.74-87
• /
• 2015

A numerical parametric study has been accomplished to figure out the effect of grille shape built in a small passenger car on the aerodynamic performance such as drag and mass flow rate through CRFM(Condenser Radiator Fan Module). Three grille opening parameters and three grille mesh parameters are selected and adopted to a simple shape passenger car model. This research will provide a design guideline for grille opening geometry and mesh shape in the grille. FLUENT, which is very well known commercial code, hires k-${\epsilon}$ turbulence model at the driving speed of 110km/h with moving wall boundary condition. A porous media condition is prepared to estimate the pressure drop amount through CRFM parts.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2601-2603
• /
• 1999

This paper describes on the development of Controller for the Utility Car combined photovoltaic. The Utility Car is generally composed of Controller, separately excited DC motor. battery and potbox. According to using battery, Utility Car have the problem of small operation time. So operating time is expanded by using parallel operating sollar cell and battery.