본 연구에서는 케이블구조의 초기형상해석을 위한 새로운 탄성포물선 케이블요소(elastic parabolic cable element)를 제시한다. 이를 위하여 먼저 탄성현수선 케이블요소(elastic catenary cable element)에 대한 적합조건과 접선강도행렬 유도과정을 간략히 한다. 이를 토대로 장력이 충분히 도입되어 자중에 의한 처짐 형상이 포물선에 가깝다는 가정 하에서 무응력길이를 포함하는 탄성포물선 케이블요소의 비선형 힘-변형관계식과 접선강도행렬을 유도한다. 또한 현(chord) 방향으로 두 케이블요소의 등가 장력식을 정의한다. 본 요소의 정확성을 확인하기 위하여, 탄성현수선과 탄성포물선 케이블요소를 각각 적용하여 고정하중을 받는 사장교의 초기형상해석을 수행하고 무응력길이, 등가장력, 그리고 최대장력 결과를 비교, 분석한다.
The place of South Weol Dynastys authorities exhumed in the region of KangChoWu, China lies adjacent to a stone ditch through which water streams crookedly, and a dark trough of stone pond in the north side. There is a sharply curved stone ditch and a crescent-shaped water entrance made by stones. The place was separated by using stone columns and stone walls. There is a beam of ditch, a crooked entrance, a flat bridge of slate, a stepping-stone, a sluice gate, and a crooked corridor. There are big and small artificial islands, and reinforcing stone drainage way in the palace pond recently exhumed at the building site for the pavilion of Hwang-Yong Temple in Kuhwang-Dong, Gyeongju city, Korea. There are four facilities assumed to be entrance and exits at four corners and an open space on which gravel was spread extensively. A narrow road and a middle road with indefinite curves at the south of Asukakyoseki exhumed by the first, second and third and two stone buckets which one is to fill with water and the other is to drain water off like fountain are there, and besides wave protecting dam and north pond and the part that water pass were excavated. Palace ponds that were extensively distributed at old residential cities are a general phenomenon of countries in eastern Asia. Anap pond of Silla and Gungnam pond of Baekje were in Kroea. We believe that Asutnkyoseki is on the extension. Although more investigations in the background of thought and the genealogical relation about the palace pond are required, it seems that an idea was surely received from China.
본 연구에서는 GPS 자료를 이용한 다중기선 처리 시 기선사이에 발생하는 공분산이 위치결정에 미치는 영향을 분석하였다. GPS를 이용한 위치결정방법 중 일반적으로 이용되고 있는 측위방법인 정지측위에 대해 공분산의 영향을 분석하였으며 이를 위해 공분산이 적절히 고려된 다중기선 처리결과를 얻은 후 단일기선 처리 결과, 즉 기선사이에 공분산이 고려되지 않은 결과와의 위치정확도 차이를 비교 분석하였다. 정지측위의 경우 정확도 차이는 거의 없었으나 다중기선 처리가 기선별 공분산을 고려했을 때 보다 안정적인 위치정확도를 확보할 수 있는 것으로 나타났다. 따라서 일반적인 측량의 경우는 기선간의 자료처리를 통해 위치결정을 하여도 충분한 요구정확도를 확보할 수 있는 것으로 판단되나 기선간의 공분산을 고려하면 좀 더 안정적이고 정확한 결과를 얻을 수 있는 것으로 사료된다.
회전근 개 파열에 대한 봉합 수술의 목적은 봉합 초기에 고정력을 높이고 건-골 사이의 간격 형성을 최소화 하며 반복적인 부하에 기계적인 안정성을 유지시키고 회전근 개의 끝이 뼈에 부착되어 치유될 때까지 건-골 사이의 치유 환경을 최적화시키는 것이다. 일열 봉합은 원래의 회전근 개 부착부에 건을 완전히 부착시키는 면적이 제일 적고 간격 형성에 취약하다. 이열 봉합은 고정 실패를 방지하는 힘이 일열 봉합보다는 우수하고 간격 형성도 더 적으며 교량형 봉합은 최대 인장력이 가장 크며 전단력 및 회전력에 강하고 간격 형성도 제일 적다. 이러한 것을 볼 때 이열 봉합 및 교량형 봉합이 일열 봉합보다 우수한 점이 많지만 수술 시간이 좀 더 오래 걸리고 삽입하는 나사못의 개수도 많아 수술료가 비싸다는 단점도 가지고 있다. 따라서 일열 봉합도 회전근 개의 점액 낭측 부분층 파열이나 작은 완전 파열에 쓰여질 수 있는 아직은 유용한 방법으로 사료된다.
환경부는 2000년대에 들어 수질오염총량관리제의 정책 도입으로 하천과 호소의 수질개선에 노력을 기울이고 있으며, 개발사업과 관련된 비점오염원에서의 비점오염물질 관리를 요구하고 있다. 포장율이 높은 토지이용 변경사업, 즉 교량, 도로, 고속도로 등의 개발 사업은 특히 비점오염원 관리를 요구하고 있다. 그러나 현재 국내에 적용되고 있는 비점오염저감시설은 대부분 소규모 장치형 시설이며, 유지관리가 어렵고 저감효율이 낮은 단점이 있다. 최근에는 장치형 시설보다 생태친화적인 기능을 가지며 녹색 및 생태축 연결이 가능한 자연형 시설을 적용하는 방향으로 정책이 변화하고 있다. 이러한 조건과 더불어 기후변화에 능동적으로 대응하기 위해서는 교량의 경우 소규모 인공습지를 조성하여 녹색축 연결, 비점오염원 관리가 바람직하다. 따라서 본 연구는 도로와 교량의 녹색축을 연결하고 비점오염물질을 저감할 수 있는 소규모 HSSF 인공습지를 개발하고자 한다. 본 연구를 통해 개발된 소규모 HSSF 인공습지는 입자상 오염물질 제거를 위한 침강지, 용존성 및 미립자의 제거를 위한 습지부로 구성되어 있으며, 녹색축 및 생태공간 확보를 위한 습지의 식생부분이 존재하고 있다. 특히 본 기술은 교량내에서 처리하는 site control 방식으로 외부 유도를 통한 처리기술이 아니기에 비용경제적으로 효율성을 가지고 있다.
This paper describes a automatic video surveillance system(AVSS) with long range and 360$^{\circ}$ coverage that is automatically rotated in an elevation over azimuth mode in response to the TTM(tracked target message) signal of vessels tracked by ARPA(automatic radar plotting aids) radar. This AVSS that is a video security and tracking system supported by ARPA radar, CCTV(closed-circuit television) camera system and other sensors to automatically identify and track, detect the potential dangerous situations such as collision accidents at sea and berthing/deberthing accidents in harbor, can be used in monitoring the illegal fishing vessels in inshore and offshore fishing ground, and in more improving the security and safety of domestic fishing vessels in EEZ(exclusive economic zone) area. The movement of the target vessel chosen by the ARPA radar operator in the AVSS can be automatically tracked by a CCTV camera system interfaced to the ECDIS(electronic chart display and information system) with the special functions such as graphic presentation of CCTV image, camera position, camera azimuth and angle of view on the ENC, automatic and manual controls of pan and tilt angles for CCTV system, and the capability that can replay and record continuously all information of a selected target. The test results showed that the AVSS developed experimentally in this study can be used as an extra navigation aid for the operator on the bridge under the confusing traffic situations, to improve the detection efficiency of small targets in sea clutter, to enhance greatly an operator s ability to identify visually vessels tracked by ARPA radar and to provide a recorded history for reference or evidentiary purposes in EEZ area.
This paper proposes a robust damper design technique for adjacent structures against model uncertainty. This approach introduces multi-objective optimization based system identification using measurement information which enables reasonable selection of the perturbation range in the robust design. Moreover, in order to improve the numerical efficiency in sampling the structural models required for the robust design of large structures, we define new objective functions which enable us to minimize the number of candidate models suitable to the purpose of the robust design. In addition, the performance index is newly employed to evaluate the robust performance of the sampled structural models, and the robust design has been performed according to the performance index. As a numerical example to demonstrate the efficiency of the proposed method, 5-story and 10-story two adjacent buildings are taken into account, and the existing and newly proposed robust design approaches are compared with each other. The results demonstrate that the proposed approach can guarantee more robust damper system only using small number of samples of the structural models because of using the measurement information which leads to improvement in the numerical efficiency, compared with the existing robust design methods.
In bridge structures, damage may induce an additional deflection which may naturally contain essential information about the damage. However, inverse mapping from the damage-induced deflection to the actual damage location and severity is generally complex, particularly for statically indeterminate systems. In this paper, a new load concept, called the positive-bending-inspection-load (PBIL) is proposed to construct a simple inverse mapping from the damage-induced deflection to the actual damage location. A PBIL for an inspection region is defined as a load or a system of loads which guarantees the bending moment to be positive in the inspection region. From the theoretical investigations, it was proven that the damage-induced chord-wise deflection (DI-CD) has the maximum value with the abrupt change in its slope at the damage location under a PBIL. Hence, a novel damage localization method is proposed based on the DI-CD under a PBIL. The procedure may be summarized as: (1) identification of the modal flexibility matrices from acceleration measurements, (2) design for a PBIL for an inspection region of interest in a structure, (3) calculation of the chord-wise deflections for the PBIL using the modal flexibility matrices, and (4) damage localization by finding the location with the maximum DI-CD with the abrupt change in its slope within the inspection region. Procedures from (2)-(4) can be repeated for several inspection regions to cover the whole structure complementarily. Numerical verification studies were carried out on a simply supported beam and a three-span continuous beam model. Experimental verification study was also carried out on a two-span continuous beam structure with a steel box-girder. It was found that the proposed method can identify the damage existence and damage location for small damage cases with narrow cuts at the bottom flange.
In the analysis of the effects of rock tunnel blasting vibration on adjacent existing buildings, the model of simplified equivalent load produces higher calculation result of vibration, due to the lack of consideration of the millisecond delay effect. This paper, based on the static force equivalence principle of blasting load, proposes a new determination method of equivalent load of blasting vibration. The proposed method, based on the elastic-static force equivalence principle of stress wave, equals the blasting loads of several single blastholes in the same section of millisecond blasting to the triangle blasting load curve of the exploded equivalent elastic boundary surface. According to the attenuation law of stress wave, the attenuated equivalent triangle blasting load curve of the equivalent elastic boundary is applied on the tunnel excavation contour surface, obtaining the final applied equivalent load. Taking the millisecond delay time of different sections into account, the time-history curve of equivalent load of the whole section applied on the tunnel excavation contour surface can be obtained. Based on Sailing Tunnel with small spacing on Sanmenxia-Xichuan Expressway, an analysis on the blasting vibration response of the later and early stages of the tunnel construction is carried out through numerical simulation using the proposed equivalent load model considering millisecond delay effect and the simplified equivalent triangle load curve model respectively. The analysis of the numerical results comparing with the field monitoring ones shows that the calculation results obtained from the proposed equivalent load model are closer to the measured ones and more feasible.
The purpose of this study is to find out how middle and high school girls show their clothing attitudes and their life-style. clothing behavior. use their ornaments according to demographic variables. The subject of this study consists o 345 middle and high school girls living in Chung-Nam Province and Taejon Metropolitan City. SPSS/PC+ program was utilized to calculate frequency(N) mean value(M) and standard deviation (SD) for statistical analysis. Differences among the populations are examined through t-test. F-test and X2-test. The results of this study are as follow : 1. Correlation between the life style and demographic variables. Especially. life-style has significant difference(p<. 05) according to type of school. middle school girls have high tendency in the type of modern and fashion. Life-style has significant difference(p< .01) according to level of achievement studying, high level girls has high tendency in the type of practical and secure. 2. Correlation between the clothing behavior and demographic variables. According to type of school. middle school girls showed higher than high school girls in clothing conformity and clothing aesthetics. According to level of achievement studying, high level girls have high tendency in clothing conformity and clothing modesty. 3. Correlation between the use their ornaments and demographic variables. Buying the ornaments, higher-level achievement studying girl’s get information in show window. but lower-level achievement studying girl’s get information in TV or radio. The use of ornaments according to the site of school, most of school girls who live in small city or town use the ornaments as usual school life but school girls who live in big city use the ornaments to look good on their clothes. Following suggestions can be made based on the discussions above: It is necessary for us to have correct understanding about the correlation between the ornaments and clothing of school girls in order to lead them to have appropriate clothing behavior. Furthermore. it is required to construct a bridge linking a course of study to rational habits guidance which will provide us more appropriate tools for clothing behavior guidance.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.