• Economic and Environmental Geology
• /
• v.37 no.2
• /
• pp.195-206
• /
• 2004

Paleomagnetic and rock-magnetic investigations have been carried out for the Cretaceous sedimentary rocks in the Poongam (also called Gapcheon) Basin in the eastern South Korea. A total of 128 independently oriented core samples were drilled from 13 sites for this study. The mean direction after bedding correction (D/I=353.1$^{\circ}$/55.6$^{\circ}$, k=21.5, =$$\alpha$_{95}$=10.1$^{\circ}$) is more dispersed than the mean direction before bedding correction (D/I=10.5$^{\circ}$/56.9$^{\circ}$, k=73.9, =$$\alpha$_{95}$=5.3$^{\circ}$), and the stepwise unfolding of the characteristic remanent magnetization (ChRM) reveals a maximum value of k at 20% unfolding. Secondary authigenic hematite accompanied by altered clays such as chlorite was identified by the electron microscope observations. These results collectively imply that the ChRM is remagnetized due to the formation of the secondary authigenic hematite after tilting of the strata. It is interpreted that the chemical remagnetization was connected to the introduction of mixed magmatic-meteoric fluids, which formed hydrothermal vein deposits near the study area. The paleomagnetic pole position (214.3$^{\circ}$E, 81.6$^{\circ}$N, =$A_{95}$=7.4$^{\circ}$) of the Cretaceous sedimentary rocks calculated from remagnetized directions is close to those of the Late Cretaceous and Tertiary poles of the Korean Peninsula. This Late Cretaceous to Tertiary remagnetization seems to be widespread over the Okcheon Belt because the chemical remagnetization is previously reported to be found in rocks from other Cretaceous small basins (e.g., Eumseong, Gongju and Youngdong basins) along the Okcheon Belt and some Paleozoic strata from the Okcheon unmetamorphosed zone.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.150-157
• /
• 2002

One of the latest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not dry but left moist before application of the bonding primer Ideally the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically, contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during cavity preparation. The aim of this study was to evaluate the effect of contamination by hemostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were removed soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive papers on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows : Group 1: Dentin surface was not etched and not contaminated by hemostatic agents. Group 2: Dentin surface was not etched but was contaminated by Astringedent$^{\circledR}$(Ultradent product Inc., Utah, U.S.A.) Group 3: Dentin surface was not etched but was contaminated by Bosmin$^{\circledR}$(Jeil Pharm, Korea.). Group 4: Dentin surface was not etched but was contaminated by Epri-dent$^{\circledR}$(Epr Industries, NJ, U.S.A.). Group 5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6: Dentin sorface was etched and contaminated by Astringedent$^{\circledR}$. Group 7 : Dentin surface was etched and contaminated by Bosmin$^{\circledR}$. Group 8: Dentin surface was etched and contaminated by Epri-dent$^{\circledR}$. Group 9: Dentin surface was contaminated by Astringedent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 10: Dentin surface was contaminated by Bosmin$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 11 : Dentin surface was contaminated by Epri-dent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. After surface conditioning, F2000$^{\circledR}$ was applicated on the conditoned dentin surface The teeth were thermocycled in distilled water at 5$^{\circ}C$ and 55$^{\circ}C$ for 1,000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the knife-edge shearing rod of the Universal Testing Machine(Zwick Z020, Zwick Co., Germany) running at a cross head speed or 1.0 mm/min. Group 2 showed significant decrease in shear bond strength compared with group 1 and group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• Applied Microscopy
• /
• v.7 no.1
• /
• pp.21-43
• /
• 1977

This experiment was undertaken in order to localize the labeled dbcAMP (dibutyryl cyclic AMP) in oocytes whose development has been suppressed by cold dbcAMP for 6 or 19 hours in vitro. Mouse oocytes were obtained from the ovaries of 3-4 week old A strain female mice, by puncturing the Graafian follicles in the modified Krebs-Ringer bicarbonate salt solution under the dissecting microscope. Those oocytes which have intact germinal vesicle were cultured in the basic culture medium supplemented with 0.4% bovine serum albumin (BSA). Cultivation of the oocytes was carried out in a microtube developed by Cho (1974). The cultures were then incubated in a humidified 5% $CO_2$ incubator maintained at $37^{\circ}C$ for 6 or 19 hours (Donahue, 1968). DbcAMP was added to culture medium for a final concentration of 100ug/ml, and $^3H-dbc$ AMP (specific activity 13 Ci/mM) for a final concentration of $40{\mu}Ci/ml$ was also added to the medium. For electron microscopic autoradiography, those oocytes recovered from the culture were washed with phosphate buffer (pH 7.4), and immediately prefixed in a 2.5% glutaraldehyde overnight and postfixed for 2 hours at $4 ^{\circ}C$ in 1% osmium tetroxide in phosphate buffer with pH 7.4 (Palade, 1952). After fixation, the materials were dehydrated in graded alcohol series and embedded in Epon 812 mixture based on the standard procedures (Luft, 1961). The thin sections $600-700{\AA}$ thick were mounted on the grids of 200 meshes. The grids containing sections were coated with a nuclear emulsion Kodak NTB-3 and stored in a cold dark box (at $4^{\circ}C$) for 3 weeks. After exposure, the samples were developed with Kodak D-19 and stained with uranyl acetate and lead citrate. Routine observation was made with Hitachi HU-11E electron microsocope. The results of the observation were as followings: 1. It was found that the labeled dbcAMP penetrated the egg plasma membrane and dispersed at random in the cytoplasm. 2. It was also observed that most of the labeled dbcAMP was attached to microfibrillar lattices portion of the oocyte cytoplasm. There fore, it is presumed that the receptor of the dbcAMP is localized in the microfibrillar lattices of the oocyte. 3. It also seems that some other cell organells such as mitochondria, Golgi complex, cortical granules are not directly related to the action of the dbcAMP. 4. The labeled dbcAMP was neither observed in the membrane nor in the nucleus. Therefore, it seems that there is no relationship between the concentration of dbcAMP and the nuclear membranous permeability. 5. There was no difference in number of dbcAMP particles when oocytes were cultured for 6 hours and 19 hours. 6. However, it was observed that, in same of the oocytes suppressed in germinal vesicle by dbcAMP for 19 hours, cell organells were moved and concentrated to a small portion of the cytoplasm, and that the morphology of the organells greatly changed to an abnormal. form. Therefore, it is supposed that those oocytes were in the process of degeneration. From the above results, it is expected that dbcAMP penetrated the egg membrane and was bound to the receptor which seems to be located in the microfibrillar lattiees portion, and that this dbcAMP-receptor complex inhibited some enzyme system of the oocytes which are essential for the germinal vesicle breakdown.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.347-357
• /
• 2003

This paper describes on the suppression of sea clutter on marine radar display using a cell-averaging CFAR(constant false alarm rate) technique, and on the analysis of radar echo signal data in relation to the estimation of ARPA functions and the detection of the shadow effect in clutter returns. The echo signal was measured using a X -band radar, that is located on the Pukyong National University, with a horizontal beamwidth of $$3.9^{\circ}$$, a vertical beamwidth of $20^{\circ}$, pulsewidth of $0.8 {\mu}s$ and a transmitted peak power of 4 ㎾ The suppression performance of sea clutter was investigated for the probability of false alarm between $l0-^0.25;and; 10^-1.0$. Also the performance of cell averaging CFAR was compared with that of ideal fixed threshold. The motion vectors and trajectory of ships was extracted and the shadow effect in clutter returns was analyzed. The results obtained are summarized as follows；1. The ARPA plotting results and motion vectors for acquired targets extracted by analyzing the echo signal data were displayed on the PC based radar system and the continuous trajectory of ships was tracked in real time. 2. To suppress the sea clutter under noisy environment, a cell averaging CFAR processor having total CFAR window of 47 samples(20+20 reference cells, 3+3 guard cells and the cell under test) was designed. On a particular data set acquired at Suyong Man, Busan, Korea, when the probability of false alarm applied to the designed cell averaging CFAR processor was 10$^{-0}$.75/ the suppression performance of radar clutter was significantly improved. The results obtained suggest that the designed cell averaging CFAR processor was very effective in uniform clutter environments. 3. It is concluded that the cell averaging CF AR may be able to give a considerable improvement in suppression performance of uniform sea clutter compared to the ideal fixed threshold. 4. The effective height of target, that was estimated by analyzing the shadow effect in clutter returns for a number of range bins behind the target as seen from the radar antenna, was approximately 1.2 m and the information for this height can be used to extract the shape parameter of tracked target..

• Korean Journal of Food Science and Technology
• /
• v.4 no.4
• /
• pp.271-275
• /
• 1972

Effects of solvent extraction by immersion on the quality and storage stability of Korean rice were studied. Proportions of lipid extracted from whole grain of rice by immersing into two volumes(v/wt) of hexane and ethanol for 72 hours at room temperature were 0.41% and 0.38% respectively. Small changes of water content and hardness of rice were observed by solvent treatment. Cooking characteristics; that is, water-uptake ratio. extended volume, total solid, and starch-iodine blue test of rice was markedly changed by ethanol treatment, while little changes were observed by hexane treatment. No considerable differences in moisture sorption isotherm of rice were observed by both solvent treatments. Changes in TBA number and stale flavor appearance of rice treated with or without solvent immersion during storage at $60^{\circ}C$ showed that rice treated with hexane had best storage stability compared to ethanol treatment, while ethanol treatment of rice had better storage stability than no treatment. Similar results were noted in changes of the flavor score of cooked rice samples which were freeze dried.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.439-477
• /
• 2000

Seasonal variation in species composition of fishes in the eelgrass bed in Angel Bay of the southern coast of Korea was determined using monthly samples by a beam trawl from April 1998 to March 1999, A total of 39 species, 2,065 individuals and 8,930 g of fishes were collected during the study period. The fish were composed of the small-sized resident species and the juveniles of Leiognathus nuchalis, Pholis nebulosa, Spgnathus schlegeli and Sebastes ineinis predominated in abundance, accounting for $60{\%}$ of total number of individuals. The number of species and biomass were low from December to March when the water temperature was low, The biomass increased by the catch of a large number of L. nuchalis and S. inemis in April and May when the eelgrass grew fast. The fish numbers decreased in June and July when the adults of the resident species declined after the spawning. A large number of juveniles which had released in spring occurred in August. The biomass of fish decreased from September, and a few number of fish were collected in winter. Species were grouped into four by cluster analysis: the warm season group including P. nebulosa, S. schlegeli and L. nuchalis, the cold season group including Chaenogobius heptaoanthus and Platycephalus indieus, the group of fish species occurred during the growing season of eelgrass such as P. couoides, S. inermis and P. perooides, and the group of fish species occurred during decaying season of eelgrass such as S. cirrhifer and H. coronatus. Principal component analysis indicated that seasonal variation in species composition was determined by the water temperature and standing crops of eelgrass.

• Journal of Genetic Medicine
• /
• v.8 no.1
• /
• pp.44-52
• /
• 2011

Purpose: Cytogenetic analysis of spontaneous abortions (SABs) provides valuable information to establish the causes of fetal loss, information that is essential to provide accurate reproductive and genetic counseling couples. Such analysis also provides information on the frequencies and types of chromosomal abnormalities and associated risks of recurrence. However, there have only been a few reports of chromosomal abnormalities in small samples of SABs in the Korean population. Here, we report the incidence and spectrum of chromosomal abnormalities for cases of 470 SAB in Korea. Material and Methods: Between 2005 and 2010, a total of 470 products of conception (POC) resulting from SABs were submitted to our laboratory for cytogenetic analysis from various medical sites in Korea. The incidences and types of specific chromosomal abnormalities were determined. The abnormalities were distinguished by gestational age at the time of SAB and by maternal age. Results: The frequency of chromosomal abnormalities in POCs was 54.3% (255/470), including 228 (89.3%) numerical and 27 (10.7%: 3 balanced and 24 unbalanced) structural abnormalities. Among the numerical abnormalities, trisomy was predominant (67.0%), followed by monosomy X (12.5%), polyploidy (8.2%), triple X (0.8%), and autosomal monosomy (0.8%). The overall sex ratio (male: female) among the 470 POCs with normal and abnormal karyotypes were 0.58 and 0.65, respectively. Trisomies were identified for each autosome, with the exceptions of 1, 3, and 19. Among the 171 autosomal trisomies, trisomy 16 was the most common (19.9%), followed by trisomy 22 (13.5%), trisomy 21 (12.3 %), trisomy 15 (9.9%), and trisomies 18 and 13 (5.3%). The frequency of chromosomal abnormalities decreased with gestational age and increased with maternal age, but only because of increases in trisomies and complex abnormalities. Conclusions: We have presented a large collection of cytogenetic data for SABs collected during the past 6 years and provided a database for prenatal genetic counseling of parents who have experienced SABs in Korea.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1135-1141
• /
• 1996

In order to investigate the composition and the actual status of extractive nitrogenous compounds in saeujeot, a salted and fermented seawater shrimp(Acetes japonicus), the extract was analyzed separately into extractive nitrogen, free amino acids, oligpopeptides, nucleotides and related compounds, quaternary ammonium bases, and guanidino compounds, using specimens collected at fish markets from July in 1994 November in 1995. The extractive nitrogen of saeujeot was ranging from 430 mg to 528 mg, and the total of free amino acids in it was ranging from 1,509 mg to 2,131 mg, The extract was rich in free amino acids especially in lysine, glutamic acid, leucine, arginine, glycine, histidine, and glutamine, However, the content of most free amino acids was fluctuated from collection to collection. The total of nucleotides and related compounds in the extract was ranging from $1.38\;{\mu}mol\;to\;7.41\;{\mu}mol$, and the rage of fluctuation was essential identical with those of the extractive nitrogen and free amino acids. Homarine, trigonelline, ${\beta}-alaninebetaine$, and glycinebetaine were found in the saeujeot extract. Among them, homarine was the most abundant, ranging from 97 mg to 224 mg, but trigonelline, ${\beta}-alaninebetaine$, and glycinebetaine were very low. TMAO and TMA in the saeujeot extract were $13{\sim}80\;mg\;and\;12{\sim}280\;mg$, respectively. A small amount of creatine (less than 6 mg) and creatinine (less than 1 mg) was detected in all samples.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.370-374
• /
• 1994

The effect of water activity(Aw) and storage temperature on retrogradation of pregelatinized corn starch was investigated at various temperature of $4^{\circ}C$, $20^{\circ}C$ and $30^{\circ}C$. Samples stored at different water activity, i.e., 0.43, 0.52, 0.75, 0.83, 0.88 and 0.93 by means of saturated salt solutions. The rate of retrogradation was determines. by enzymic digestibility, and evaluated by Avrami equation. The degree of retrogradation during storage showed a great difference around Aw 0.8. At Aw 0.52 and 0.75 at all temperatures, retrogradation occurred slightly. The effect of water activity on retrogradation was much greater at $4^{\circ}C$ than 300. And at Aw 0.43, the degree of retrogradation after 3-week storage was smaller than 3.9%. The critical water activity of retrogradation was inferred as Aw 0.43. At each temperature, the degrees of retrogradation of gelatinized corn starch after 24-day storage were 30% at Aw 0.8 and Aw 0.9, and greater than 50% at the Aw above 0.9. At Aw below 0.8 the degree of retrogradation was about 20%. The rate constants of retrogradation according to Aw showed small differences at $20^{\circ}C$ and $30^{\circ}C$, but showed a great difference at $4^{\circ}C$. The value of exponent of Avrami was 1.0 regardless of temperature and water activity. And the rate constants of retrogradation increased with increasing Aw, but decreased with increasing temperature.

• Journal of Oral Medicine and Pain
• /
• v.30 no.2
• /
• pp.269-276
• /
• 2005

This in vitro study evaluated the influence of a flowable composite resin on the tensile bond strength of resin to enamel and dentin treated with Er:YAG laser and diamond bur. 96 Buccal enamel and mid-coronal dentin were laser-irradiated using an Er:YAG laser and treated with diamond bur. Each groups(48) were divided two small groups depends on acid-etching procedure. Light-cure flowable resin(Metafil Flo) and self-cure resin(Clearfil FII New Bond) were used in this study. After surface etching with 37% phosphoric acid and the application of an adhesive system, specimens were prepared with a hybrid composite resin. After 24hours storage in distilled water at 37$^{\circ}C$, all samples were submitted to the tensile bond strength evaluation, using a universal testing machine(Z020, Zwick, Germany). The obtained results were as follows: 1. TBS of acid-etching group were higher than those of non-etching group in both enamel and dentin treated with Er:YAG laser and diamond bur. Laser 'conditioning' was clearly less effective than acid-etching. Moreover, acid etching lased enamel and dentin significantly improved the microTBS of M-Flo. 2. In enamel, TBS of laser-irradiated group were lower than those of bur-prepared group. However, in flowable resin subgroup, there were not differed those between two groups in dentin. 3. In laser-treated group, TBS of flowable composite resin were higher than those of self-curing resin in dentin, however, there was no difference in enamel. From this study, we can conclude that the self- and light-cure composite resin bonded significantly less effective to lased than to bur-cut enamel and dentin, and that acid-etch procedure remains mandatory even after laser ablation. We suggest that Er:YAG laser was useful for preparing dentin cavity with flowable resin filling.