• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.2
• /
• pp.68-76
• /
• 1989

The effect of characteristic of mixture sowing combination on the development of botanical composition was conducted for 12 years on the meadow experiment. The results of this study were summarized as follows. 1. Festuca pratensis lost the expected position of a dominant species. Its vegetation ratio decreased gradually until the last survey year. 2. Arrhenatherum elatius, known as a typical 2-cutting grasss, developed to a dominant species only in the 3- cutting plot without limitation. 3. Alopecurus pratensis, whose feeding value diminishes rapidly, developed to a dominant species regardless of N-fertilization under the condition of 3-cutting, even though the same small amount of seeding was introduced as usual. 4. Trisetum flavescens which causes calcinose exceeded the 40% of vegetation ratio which was the approved rate for feeding at the high N-level (2OOKgIha). 5. Among the introduced, the species showed the significance in quantity were Lotus corniculafus solely in the 2-cutting plot, and Trifolium repens solely in the 3-cutting plot. In the 3-cutting plot legume yet remained under N-fertilization. 6. The appropriate ratio of vegetation for the subordinate species in the mixture sowing combination was easily attained from the least amount of seeding (Gramineae with max. 3Kg/ha, Leguminosae with max. 2kgIha). 7. Into the mixture sowing combination, infiltrated unintroduced species marked more noticeably in the 2- cutting plot than in the 3-cutting plot.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.669-676
• /
• 2016

A field study was conducted to determine the runoff loss of N and P in small scale of red pepper field plots (10% slope), consisting of three different plots with black polyethylene vinyl mulching (mulching), ridge without mulching (ridge), and flat without ridge and mulching (flat). Composted manure and urea as a basal application were applied at rates of $20MT\;ha^{-1}$ and $93kg\;N\;ha^{-1}$, respectively. Urea at $189kg\;N\;ha^{-1}$ and fused phosphate at $67kg\;P_2O_5\;ha^{-1}$ were additionally applied on June 25 with different fertilization methods, broadcast application in flat plot and hole injection in ridge and mulching plots. Plant uptake of N and P was positively correlated with their respective concentrations in surface soil: mulching > ridge > flat plots. The runoff loss by soil erosion was higher in flat plot than ridge and mulching plot with contour line. Nitrate loss by the runoff water had no significant differences among three surface management practices, but the higher average value in ridge and mulching plots than flat plot. Especially, the flat plot had no phosphate loss during summer season. This is probably due to low labile P content in surface soil of flat plot. In the summation of soil and water loss, flat plot was higher in N and P loss than ridge and mulching plot with contour line. Nevertheless, the nitrate and phosphate loss by runoff water could be more important for non-point source management because the water could meet the river easier than eroded soil because of re-deposition around slope land.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.1
• /
• pp.87-97
• /
• 2004

The paper presents the results from the applications of the Water Erosion Prediction Project (WEPP) model to a single plot, and also a small watershed in the Mid Korean Peninsula which is comprised of hillslopes and channels along the water courses. Field monitoring was carried out to obtain total runoff, peak runoff and sediment yield data from research sites. For the plot of 0.63 ha in size, cultivated with com, the relative error of the simulated total runoff, peak runoff rates, and sediment yields using WEPP ranged from -16.6 to 22％, from -15.6 to 6.0％, and from 23.9 to 356.4％ compared to the observed data, respectively. The relative errors for the upland watershed of 5.1 ha ranged from -0.7 to 11.1 ％ for the total runoff, from -6.6 to 35.0 ％ for the sediment yields. The simulation results seem to justify that WEPP is applicable to the Korean dry croplands if the parameters are correctly defined. The results from WEPP applications showed that the major source areas contributing sediment yield most are downstream parts of the watershed where runoff concentrated. It was suggested that cultural practice be managed in such a way that the soil surface could be fully covered by crop during rainy season to minimize sediment yield. And also, best management practices were recommended based on WEPP simulations.

• The Korean Journal of Ecology
• /
• v.9 no.1
• /
• pp.91-101
• /
• 1986

To investigate the distribution of Plantago asiatica Linne, almost, restricted on the road-side, the plant growth analyzed by experimental cultivation under the condition of tread-pressure; 10 times/day (7.33kg/$cm^2$ ), 20 times/day (12.27kg/$cm^2$), 30 times/day (20.05kg/$cm^2$ ) and the control plot (1.68kg/$cm^2$ ). The matter production in the 10-time-per-diem plot (7.33kg/$cm^2$ ) of tread-pressure howed more large value than that inthe control one (1.68kg/$cm^2$ ) and those in the 20-0time-per-diem plot (12.27kg/$cm^2$ ) and the 30-time-per-diem one (20.05kg/$cm^2$ ) small values than that of the control plot. Especially, the growth of roots and spikes was extremely repressed. The number of leaves, scapes and lateral buds tend to increase in the tread-pressure of 20 times/day (12.27kg/$cm^2$ ) and 30 times/day (20.05kg/$cm^2$ ). The water contents of roots along the increase of tread-pressure to continuosly decreased. By the increase of tread-pressure, T/R ratio and C/F ratio their group decreased. The plant growth (7.33kg/$cm^2$ ) in the 10-time-per-diem plot increased more than that in the control one is regarded as the effect of tread-pressure affection on the road-side distribution of this plant.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.201-206
• /
• 1999

For the mass production of plug seedlings in cultivar ‘Dejima’ potato (Solanum tuberosum L.) the optimal apical cutting diameter for rooting and rapid multiplication of stem cuttings in hydroponics were determined. In addition, the best planting date was predicted to increase tuber yield of plug seedlings at fall cropping in Cheju-Do, Korea. Days to initial rooting decreased as the cutting diameter was reduced. Plant height, leaf number, root length and root weight per plant were favorable as the cutting diameter was small. The ideal cutting diameter was 1-2 mm in this experiment. In the hydroponic cultures, the Japanese standard (JS) nutrient solution was the most effective for multiplication of stem cuttings. It was able to propagate more than 20 times a month from a single mother plant. Viability of plants, which were derived from plug seedlings using stem cuttings, was excellent when transplanted to the field. The number of tubers and tuber yield in both of the plug seedlings and seed potato planting plots were high when planted on 25 August. The number and yield were reduced when planted on 15 August, 5 September and 15 September. The degree of decrease of tuber yield in the plug seedling planting plot however, was lower than that of seed potatoes when the planting date was late. In the case of small tubers (under 30 g), the number of tubers and tuber yield were evidently increased in the seed potato tuber planting plot; the yield of large tuber (over 80g) in the plug seedling planting plot was higher than that of the seed potato. The total tuber yield per plant in the plug seedling planting plot was less than that of the seed potato; therefore, in order to increase tuber yield it was necessary to increase field plant density.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.2
• /
• pp.94-98
• /
• 1988

An improvement over the method of pore size distribution analysis has been made in this work. The improved method is based upon the idea of the micro pore analysis of Mikhail, Brunauer, and Bodor, and utilizes the V-t curve of nitrogen adsorption. Two pore models are assumed, and the deviation of the initial slope of the V-t plot is ascribed to the pore filling and to the adsorption on the wall of unfilled pores. The improved method of this work is very convenient in that the analysis starts from the small pore regions. The method of this work is however quite distinct from the similar V-t plot method proposed by Sellevold and Radjy. The proposed method is applied to a few adsorbents, and very satisfactory results are obtained. The cumulative surface area calculated by this method also agrees very well with those obtained by the BET plot or by the t-method.

• The Korean Journal of Applied Statistics
• /
• v.27 no.4
• /
• pp.629-643
• /
• 2014

It is common to check the validity of an assumed model with the heavy use of diagnostics tools when conducting data analysis with regression techniques; however, outliers and influential data points often distort the regression output in undesired manner. Jang and Anderson-Cook (2013) proposed a graphical method called a firework plot for exploratory analysis that could visualize the trace of the impact of possible outlying and/or influential data points on individual regression coefficients and the overall residual sum of squares(SSE) measure. They developed 3-D plot as well as pair-wise plot for the appropriate measures of interest. In this paper, the approach was extended further to tell the strength of their approach; in addition, a more meaningful interpretation was possible by adding a measure not mentioned in their paper. This approach was applied to the mixture experiment because we felt that a detailed analysis of statistical measure sensitivity is required in a small experiment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.1
• /
• pp.68-79
• /
• 2009

It is inevitable to have cutting line to get the 2D pattern from 3D body surface. In this paper the efficiency of curvature plot as a cutting line in the process of flattening 3D surface was investigated. As reference, basic clothing construction line was adopted to divide the 3D surface into small blocks to make the flattening process easy. Female dummy as well as human body were scanned and surface of the upper body was segmented using curvature plot and basic constructing line. 2D tight-fit pattern was developed using three software, the RapidForm 2004, 2C-AN and Yuka CAD. Gap between clothes and body, and the clothing pressure on the body was observed to determine the fit of the clothes. As results, clothes constructed with blocks divided by curvature plot displayed a similar level of tight fit as compared with those by basic construction line. It was found that curvature plot is effective method as a segmentation of the 3D surface even for the actual body which does not have any previous reference line. It is expected that application of curvature plot will be expanded in 3D apparel technology.

• Plant Resources
• /
• v.4 no.1
• /
• pp.6-12
• /
• 2001

Growth and yield of licorice were investigated under the different conditions of ridge height, planting density, and irrigation in order to establish its cultural practices for the domestic production with the aim to substitute the import. Seedlings were grown under low ridge(20cm) and high ridge(40cm) in low density plot(60$\times$30cm) and high density plot(40$\times$30cm), respectively. The low ridge cultivation of large seedlings increased plant height and root length under low density, and stem and root diameter under high density compared to the high ridge cultivation. In the high ridge cultivation, high density plot was 1.1 to 1.3 times in plant height, root length, stem and root diameter as high as low density one. Fresh and dry weight of plant and root in high ridge were 1.3 to 1.5 times as high as those in low one. The growth of small seedlings(4~10g) were generally poor compared to that of large seedlings. High density plot in low ridge showed the good growth characteristics including plant height, root length, stem and root diameter, and number of branch. High density plot was 1.4 to 1.6 times in fresh and dry weight of plant and root as high as low density plot. In the seasonal changes of growth under various irrigation regimes, the twice irrigation a day produced the more number of leaf than the other regimes since around 46 days after transplanting. The former irrigation resulted in 1.2 to 1.4 times in plant height as long as the other irrigations around 26 days after transplanting and then the difference was increased to 1.6 to 2.0 times around 64 days after transplanting. Under the twice irrigation a day, plant height, root length, stem diameter, root diameter, number of leaf, fresh plant weight, dry plant weight, fresh root weight, dry root weight were 1.6 to 2.0, 1.1, 1.2 to 1.6, 1.3 to 1.8, 1.9 to 2.7, 1.7 to 8.0, 1.6 to 2.8,2.0 to 3.0, 1.6 to 2.7 times as high as those under the other irrigation regimes, respectively.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.1
• /
• pp.143-152
• /
• 2017

Restriction of completely randomization within a block can be handled by a split plot factorial design splitted by several plots. $3{\times}3$ split plot factorial design with two fixed main factors and one fixed block shows that powers of the rank transformed statistic for testing whole plot factorial effect and split plot factorial effect are superior to those of the parametric statistic when existing effect size is small or the remaining effect size is relatively smaller than the testing factorial effect size. Powers of the rank transformed statistic show relatively high level for exponential and double exponential distributions, whereas powers of the parametric and rank transformed statistic maintain similar level for normal and uniform distributions. Powers of the parametric and rank transformed statistic with two fixed main factors and one random block are respectively lower than those with all fixed factors. Powers of the parametric andrank transformed statistic for testing split plot factorial effect with two fixed main factors and one random block are slightly lower than those for testing whole plot factorial effect, but powers of the rank transformed statistic show comparative advantage over those of the parametric statistic.