• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.39-51
• /
• 2014

This paper deals with design of a direct-coupled, small-scaled permanent magnet generator (PMG) for wind power application. First, this paper determines rated power and speed of the PMG from measured characteristics of wind turbines. Second, we derive analytical solutions for the open-circuit field in order to determine optimum magnet thickness and pole pitch/arc ratio. Third, on the basis of open circuit field solutions, stator magnetic circuit including slot opening, teeth width and yoke thickness is designed. And then, a diameter of stator coil which agree with a required current density is calculated, and its turns are determined from the area of slot considering winding packing factor. Finally, finite element (FE) method is employed in analyzing the details of the designed PMG and, test results such as back-emf measurements are given to confirm the design.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.351-358
• /
• 1999

The base-isolation technology is to set up LRB between the base of a building and the ground to protect the building from seismic force. As Korea belongs to the region of moderate or weak seismicity it is more resonable to apply the base-isolation technology of LRB in the field of the response reduction of equipments under machine or transportation vibrations than in the field of seismic response reduction of buildings, In this paper small-scale LRB's designed for the response reduction of equipments are manufactured and tested for thier performance. The shaking table test is conducted to analyze the characteristics of LRB such as the variation of natural frequencies damping ratios and equipments responses.

• Structural Engineering and Mechanics
• /
• 제69권5호
• /
• pp.487-497
• /
• 2019

Rapid advances in the engineering applications can bring further areas to provide the opportunity to manipulate anisotropic structures for direct productivity in design of micro/nano-structures. For the first time, magnetic affected wave characteristics of nanosize plates made of anisotropic material is investigated via the three-dimensional bi-Helmholtz nonlocal strain gradient theory. Three small scale parameters are used to predict the size-dependent behavior of the nanoplates more accurately. After owing governing equations of wave motion, an analytical approach based harmonic series is utilized to fine the wave frequency as well as phase velocity. It is observed that the small scale parameters, magnetic field and wave number have considerable influence on the wave characteristics of anisotropic nanoplates. Due to the lack of any study on the mechanics of three-dimensional bi-Helmholtz gradient plates made of anisotropic materials, it is hoped that the present exact model may be used as a benchmark for future works of such nanostructures.

• Journal of Species Research
• /
• 제11권3호
• /
• pp.174-179
• /
• 2022

In this study, we identified two marine synchaetid rotifers, Synchaeta grimpei Remane, 1929 and S. vorax Rousselet, 1902, in Korea, which are the first synchaetid rotifers collected from a marine environment in the country. Prior to this study, all six synchaetids recorded in Korea were collected from freshwater environments. The morphological characteristics of both species are consistent with those recorded in previous studies of each species. Synchaeta grimpei is distinguished from other synchaetid rotifers by its cone-shaped body, wide and flat apical field, indistinct auricles, and long foot with two separated small toes. The morphological characteristics of Korean S. vorax specimens were most similar to the original description of Rousselet (1902), with its slender and cylindrical trunk shape, strongly convex apical field, and short foot with two small, separated toes. The rami of the Korean S. vorax specimen contained one frontal hook and several distinct and large teeth. Here, we provide the morphological diagnoses of the two synchaetid rotifers and the sequences of the partial mitochondrial cytochrome c oxidase subunit I (COI) of the two species.

• 한국의학물리학회지:의학물리
• /
• 제11권2호
• /
• pp.147-155
• /
• 2000

Patient dose verification is one of the most important parts in quality assurance of the treatment delivery for radiation therapy. The dose distributions may be meaningfully improved by modulating two dimensional intensity profile of the individual high energy radiation beams In this study, a new method is presented for the pre-treatment dosimetric verification of these two dimensional distributions of beam intensity by means of a charge coupled device video camera-based fluoroscopic device (henceforth called as CCD-VCFD) as a radiation detecter with a custom-made software for dose calculation from fluorescence signals. This system of dosimeter (CCD-VCFD) could reproduce three dimensional (3D) relative dose distribution from the digitized fluoroscopic signals for small (1.0$\times$1.0 cm$^2$ square, ø 1.0 cm circular ) and large (30$\times$30cm$^2$) field sizes used in intensity modulated radiation therapy (IMRT). For the small beam sizes of photon and electron, the calculations are performed In absolute beam fluence profiles which are usually used for calculation of the patient dose distribution. The good linearity with respect to the absorbed dose, independence of dose rate, and three dimensional profiles of small beams using the CCD-VCFD were demonstrated by relative measurements in high energy Photon (15 MV) and electron (9 MeV) beams. These measurements of beam profiles with CCD-VCFD show good agreement with those with other dosimeters such as utramicro-cylindrical (UC) ionization chamber and radiographic film. The study of the radiation dosimetric technique using CCD-VCFD may provide a fast and accurate pre-treatment verification tool for the small beam used in stereotactic radiosurgery (SRS) and can be used for verification of dose distribution from dynamic multi-leaf collimation system (DMLC).

• 한국인터넷방송통신학회논문지
• /
• 제17권6호
• /
• pp.161-167
• /
• 2017

최근 소형 레이더는 다양한 운용환경에서 대응하기 위하여 소형화와 저전력화를 추진한다. 또한 한번의 타격으로 표적의 시스템을 무능화시키기 위해 높은 거리해상도를 갖는 소형 밀리미터파 레이더 개발을 요구한다. 본 논문에서는 소형 밀리미터파 레이더에서 사용할 수 있는 신호처리기를 설계하고 구현하였다. 소형 밀리미터파 레이더를 위한 신호처리기는 소형화와 저전력화를 위해 디지털 IF(Intermediate Frequency) 수신기와 실시간 FFT 연산이 가능한 DFT(Discrete Fourier Transform) 모듈을 설계하였다. 또한 소형 밀리미터파 레이더의 수신 경로에서 발생할 수 있는 신호의 왜곡을 보정하기 위한 수단으로 FPGA(Field Programmable Gate Array)와 DAC(Digital Analog Converter)를 활용하여 시스템에서 사용하는 RF(Radio Frequency) 신호를 생성할 수 있도록 하였다. 마지막으로 성능시험을 통해 구현한 신호처리기를 검증하였다.

• 한국조경학회지
• /
• 제30권5호
• /
• pp.107-115
• /
• 2002

This study was carried out to compare artificial soil formulated by blending calcined clay and coconut peat with perlite, then to evaluate this soil as a perlite substitute for use as an artificial planting medium. To achieve this, a determination of the physico-chemical properties and it's effect on plant growth were conducted by comparing those with large perlite grains and small grains. The results are summarized as follows: 1) The bulk density was 0.41g/㎤. This density was lower than that of field soil, but higher than that of large perlite grain(0.23g/㎤) and small grain(0.25g/㎤). The porosity, field capacity, and saturated hydraulic conductivity were 71.3%, 49.2%, and 3.8$\times$10-2cm/s, respectively. The air-permeability, water holding capacity, and drainage were better than or equal to that both large and small perlite grain. 2) It was near-neutral in reaction(pH=6.6). It had a high organic carbon content(65.8g/kg) and a low available phosphoric acid content(84.7mg/kg). It was similar to crop soil in cation exchange capacity(11.4cmol/kg). It had a low exchangeable calcium content(0.71cmol/kg), a low exchangeable magnesium content(0.68cmol/kg), a high exchangeable potassium content(2.54cmol/kg), and a high exchangeable sodium content(1.12cmol/kg). Except for the exchangeable potassium and sodium content, the chemical properties were better than or equal to both large and small grain perlite. The excessive exchangeable potassium or sodium content will inhibit plant growth. 3) In Experiment 1, the plant growth tended to be higher compared to that of large and small perlite gains. But in Experiment 2, it tended to be lower. This might be linked to the excessive exchangeable potassium or sodium content. 4) It could be considered as a renewable perlite substitute for greening of artificial soil. But, it would be necessary to leach the excessive exchangeable potassium or sodium to avoid the risk of inhibiting plant growth.

• 한국유기농업학회지
• /
• 제24권4호
• /
• pp.681-698
• /
• 2016

With increasing public concern for environmentally friendly agriculture, ecological aspect of landscape management is of growing importance. AHP (Analytical Hierarchy Process) analysis were conducted based on the delphi survey of 31 experts to evaluate the relative importance and the preference of landscape elements. Landscape components of organic farmland were classified into 2 landscape fields, 5 landscape types, 14 landscape units, and 37 landscape elements. Overall relevance score for the proposed landscape components were about 5.5 on the seven point scale. While the relative importance weight of cropland landscape field was 0.71, the weight of intra-structure landscape field was 0.29. Among the cropland landscape, relatively higher weight was assigned to farming system (0.47) and margins (0.31), as compared with hydrological system (0.22). In the farming system, crop (0.40) and farm land (0.39) were the most important landscape units. In the margins, higher weight was given to Buffer zone (0.44) and Trees (0.42). Biological habitat (0.43) ranked the highest score in the hydrological system. Preferable landscape elements were glass house, companion plants, rice paddy field, diverse crop species, small pond, and small river, which are representing ecological advantage of organic farming systems. This result indicated that the landscape elements identified in the study would be suitable to evaluate ecological aspect of rural landscape in organic farmland.

• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1315-1320
• /
• 2011

Whey protein (WP) is a mixture of proteins, and is of high nutritional values. WP has become an important source of functional ingredients in various health-promoting foods. In this study, size-exclusion chromatography (SEC) and asymmetrical flow field-flow fractionation (AsFlFFF) were used for separation and analysis of whey proteins. It was found that a lab-prepared WP from raw milk is mostly of ${\beta}$-lactoglobulin with small amount of higher molecular weight components, while a commercial whey protein isolate (WPI) powder contains relatively larger amount of components other than ${\beta}$-lactoglobulin, including IgG and protein aggregates. Results suggest that AsFlFFF provides higher resolution for the major whey proteins than SEC in their normal operation conditions. AsFlFFF could differentiate the BSA and Albumin, despite a small difference in their molecular weights, and also was able to separate much smaller amount of aggregates from monomers. It is noted that SEC was able to show the presence of low molecular weight components other than the major whey proteins in the WP samples, which AsFlFFF could not show, probably due to the partial loss of those low molecular weight species through the membrane.

• 한국멀티미디어학회논문지
• /
• 제23권3호
• /
• pp.440-446
• /
• 2020

The application field of smart terminals is increasing and its application is also spreading in the defense field. The use of smart terminal based map application is very important in battle fields. The problem is that the communication infrastructure is easy to collapse and the use of GPS is usually disturbed. In this paper, we studied the maps stored in the QR tag at the battle field. The problem is to abstract the map information so that it can be stored in the small QR tag. We have abstracted path information on a vector basis and require only a small amount of data compared to imaged path information. We analyzed the amount of data generated by the abstraction and mathematically analyzed the boundary where the amount does not exceed the capacity limit of the QR tag. Our research can be applied not only to battlefields, but also to disaster / disaster scenes, or in environments with difficult Internet communications, such as mountainous areas.