• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.993-999
• /
• 2008

A girder height limitation is the critical parameter for rapid construction of bridge deck and construction space limitation especially in urban area such as high population area and high density habitats. A standard post-tensioned I-shaped concrete girder usually demands relatively higher girder height in order to retain sufficient moment arm between compression force and tensile force. To elaborate this issue, a small U-shaped section with wide flanges can be used as a possible replacement of I-shaped standard girder. This prestressed concrete box girder allows more flexible girder height adjustment rather than standard I-shaped post-tensioned girder plus additional torsion resistance benefits of closed section. A 30m-long, 1.7m-high and 3.63m-wide actual small prestressed concrete box girder is designed and a laboratory test for its static behaviors by applying 6,200kN amount of load in the form of 4-point bending test was performed. The load-deflection curve and crack patterns at different loading stage are recorded. In addition, to extracting the dynamic characteristics such as natural frequency and damping ratio of this girder, several excitation tests with artificial mechanical exciter with un-symmetric mass are carried out using operational frequency sweep-up. Nonlinear finite element analysis of this 4 point bending test under monotonic static load is investigated and discussed with aids of concrete damaged plasticity formulation using ABAQUS program.

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.311-323
• /
• 2001

One of the various mechanics used to treat unilateral Class II malocclusion is head gear with asymmetric face bow. We made the finite element models of unilateral Class II maxillary dental arch and power arm asymmetric face bow. We designed this experiment to observe stress distribution of periodontal ligament, reaction force, and displacement and to understand force system, so to predict the therapeutic effect. On the basis of computerized tomograph of maxillary dental arch of 25 years old male with normal occlusion without extraction and orthodontic treatment history, we made finite element models of maxillary dental arch and periodontal ligament. Then we modified that model to unilateral maxillary Class II malocclusion model of which maxillary left molar displaced mesially. Also, We made finite element model of asymmetric face bow of which right outer bow shorter than left by 25mm(RMO, Penta-FormTM/Medium size, 0.045 inch iner bow, 0.072 inch outer bow). After that, retraction force of 250g, 300b, 350g were applied to maxillary first molar. We concluded as follow. 1. The Net force that both maxillary first molars were received increased as the retraction force increased. Mesially positioned tooth received more force than normally positioned tooth. But, both tooth were received distal force, so distal movement occured. 2. Both tooth received buccal lateral force. In analysis of force element, as the retraction force were increased, force of X-axis at mesially positioned tooth decreased, and force of X-axis at normally positioned tooth increased. so lateral force component moved to the side received less force from more force. 3. There were rotation, tipping with distal movement in maxillary first molar. As retraction force were increased, rotation and tipping also increased. More tipping and rotation occured at the side received more force, that is, mesially positioned tooth. Though it Is small change, displacement of same pattern occur in normally positioned tooth

• Journal of the East Asian Society of Dietary Life
• /
• v.7 no.4
• /
• pp.512-518
• /
• 1997

This study was performed to determine the amount of aluminum, which is one of the factors of Alzheimer's disease, In some fishes caught from some areas of the west coast in Korea. The 46 aquatic products were composed of fishes, molluscs, and salt-fermented products (jeot-gal). The 24 fishes were Hickory shad, Gobies, Pomfref, Atkafish, Flounder, Jambeng-ie Monk fish, Yellow hair tail, Mackerel, Bartailed flathead, Alaska pollack, Brown croaker, Eel, Fine-spotted flounder, Black spotted grouper, Sea-eel, Pacific saury, Areliscus honaleus, Small boil-dried anchovy, Croaker, Hair tail, Sea bream genuine, Motleystrip rainbowfish, and Bastard halibut. The 15 Molluscs were Whip-arm octopus, Sea arrow, Common squid, Han chi, Cuttle fish, Turban shell, Pond snail, Orient calm, Surf calm, Butter calm, Crib shell, Oyster, Egg cockle, Little neck calm, and Arkshell. The 7 salt-fermented products were salt-fermented Shrimp, Little neck, Oyster, Shad, Gonjeng-ie, Hqangsegi, and Squid. All of them were ashed with 5$m\ell$ HNO$_3$ and then with 10$m\ell$ ternary solution (HNO$_3$ : H$_2$SO$_4$ : HClO$_4$= 10 : 1 : 4). After ashing of the samples, the aluminum amount were measured by ICP. The aluminum amount of molluscs was significantly higher than that of fishes and salt-fermented products(p＜0.01). The aluminum amount of Orient calm and Healak in molluscs were 827.70, 812.55ppm, respectively, which were the most amounts compared nth that of the other samples. But the aluminum amounts of Bartailed flathead and Sea bream, genuine In fishes were 0.98, 0.97ppm, respectively, which were the least amounts compared with that of other samples. This study was limited within 46 aquatic samples, therefore I hope there will be wider efforts to determine about auminum amount in broade range of aquatic foods for the prevention of Alzheimer's disease.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.2
• /
• pp.210-230
• /
• 1995

To compare the wear resistance of four kinds of commercial acrylic resin teeth [SR-Orthosit PosterioresR(Ivoclar Co., Liechtenstein), Endura PosteriorR(Shofu Inc. Japan), trubyte IPN teethR(Dentsply International Inc., York,), Trubyte BiotoneR(dentsply Inermational Inc. Brazil) by means of the toothbrush abrasion method, the artificial resin teeth were embedded in epoxy resin with the occlusal surfaces aligned in one plane for a total of 40 blocks. There after, each lock was mounted in the arm of the toothbrush abrasion machine(K 236, Japan). Wear measurements were made on the three preconditioned states. Those were as follows : no treatment specimens, thermocycled specimens, and thermocycled specimens which were immeresed applied load of 400g during the buring the brushing cycle. At the end of the 30,000-stroke cycle, each specimen was removed, and weighed. The microhardness of four kinds of commercial resin teeth were determined by means of microhardness tester. Microhardness tests were performed on te no treatment specimens, thermocycled specimens, and thermocycled specimens with immersion in the denture cleansing solution. Finally, the comparison of thermal properties were perfomed using differential scanning calorimeter(DSC-1500). The following results were obtained : 1. In the case of no treatment teeth, the wear amount of endura Posterior(EN) was the greatest among the others(p<0.01), and the wear amount of three kinds of artificial resin teeth was increased in the order of Trubyte IPN teeth(IN), Trubyte Biotone(BN), SR-Orthosit Posteriores(SN) but there was no statistic significance(p>0.01). 2. The wear amount of Trubyte IPN teeth(IT) and Trubyte Biotone(BT), was increased due to thermocycling effect, but that of Endura Posteriores(ET) was decreased conversely(p<0.01). 3. Except for the SR-Orthosit Posteriores(STC), the wear amount of three kinds of artificial resing teeth(that is, ETC, ITC, BTC) was increased due to denture cleansing solution$(Cledent^R)$, but there was no statistic significance(p>0.01). But the wear amount of the SR-Orthosit Posteriores(STC) was the greatest among the others(p<0.01). 4. The wear amount of toothbrush was the greatest in case of contact with occlusal surface of SROrthosit Posteriores resin teeth(p<0.01). 5. the microhardness values(KHN) of the SR-Orthosit Posteriores was the highest among the experimental artificial resin teeth(p<0.01). 6. There was no relationship between microhardness valuse(KHN) and wear amount of four kinds of experimental artificial resin teeth(p<0.01). 7. The differential canning calorimetric property of four kinds of artificial resin teeth did not show endothermal or exothermal peak in the range of $100^{\circ}C$

• Journal of Genetic Medicine
• /
• v.2 no.1
• /
• pp.11-15
• /
• 1998

This paper reports 3 cases with 46,XX sex reversed male. Three 46,XX hypogonadal subjects showed complete sex reversal and had normal phallus and azoospermia. We studied them under clinical, cytogenetic and molecular aspects to find out the origin of the sex reversal. Patients had markedly elevated serum follicle-stimulating hormone (FSH) and lutenizing hormone (LH) and decreased or normal range of serum testosterone. The testicular volumes were small (3-8ml). Testicular biopsy showed Leydig cell hyperplasia and atrophy of seminiferous tubules. We obtained the results of normal 46,XX, and the presence of Y chromosome mosaicism was ruled out through XY dual fluorescent in situ hybridization (FISH). By using polymerase chain reaction (PCR), we amplified short arm (SRY, PABY, ZFY and DYS14), centromere (DYZ3), and heterochromatin (DYZ1) region of the Y chromosome. PCR amplification of DNA from these patients showed the presence of the sex-determining region of the Y chromosome (SRY) but didn't show the centromere and heterochromatin region sequence. The SRY gene was detected in all the three patients. Amplification patterns of the other regions were different in these patients; one had four amplified loci (PABY+, SRY+, ZFY+, DYS14+), another had two loci (SRY+, ZFY+) and the other had two loci (PABY+, SRY+). We have found that each patient's translocation elements had different breakpoints at upstream and downstream of the SRY gene region. We conclude that the testicular development in 46,XX male patients were due to insertion or translocation of SRY gene into X chromosome or autosomes.

• The Korean Journal of Pain
• /
• v.4 no.2
• /
• pp.111-121
• /
• 1991

It has been well known that the splanchnic nerve block is effective for patients who suffer from intractable upper abdominal pain. However, it is unclear whether the effect of the splanchnic nerve block depends on varied alcoholic concentration. In this study, an attempt was made to use absolute ethanol on patients who recieved a splanchnic nerve block at Severance Hospital during the period from September l990 to April l991. The results are as follows; 1) Among the 33 patients, including 22 males and 1l females, the fifties and sixties were the major age groups. 2) Stomach cancer was the most common underlying disease(13 cases), with pancreatic can- cer next(9 cases). 3) The main locations of pain were the upper abdomen, epigastrium, and entire abdomen in decreasing order. 4) There were 17 cases who had had chemotherapy, and 1l cases of whom had had surgery before the splanchnic nerve block. 5) The volume of alcohol used was 12 ml bilaterally. 6) Among the 33 patients, 15.2% required a second block within two weeks of the first block. One case required a third block. 7) The most common complications of splanchnic nerve block were hypotension(33.3%), occasional transient sharp burning pain, flushing of face, pain on injection site, nausea, vomiting, dyspnea, chest discomfort and diarrhea. 8) The supplemental block most commonly used was a continuous epidural block. It was used both as a diagnostic block and to afford relief from pain before the splanchnic nerve block was done. 9) The interval between the receiving the absolute ethanol block and discharge was within 2 weeks in l5 cases. But, in the patients with poor general health, the interval between the splanchnic nerve block and discharge prolonged. The above results suggest that bilateral splanchnic nerve block done with absolute ethanol after an effective test block with 1% lidocaine under C-arm fluroscopic control is satisfactory and reliable. Still, 26.6% of the patients received a repeat block within 2 weeks. Insufficient spread of ethanol due to its small volume seems to be a major factor in the repeat block. Minimizing the incidence of repeat block remains a problem to be solved.

• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.141-147
• /
• 2009

Background: We performed this study to identify the tumor suppressor genes located in the long arm of chromosome 21 in non-small cell lung cancer. Material and Method: The genes of USP25 in 21q11.2, NCAM2, ADAMTS1 in 21q21.2, and Claudin-8 (CLDN8), Claudin-17 (CLDN17) and TIAM1 in 21q22.1 were investigated for their gene expressions, genetic alterations and promoter methylation. Result: The expressions of CLDN8 and CLDN17 were significantly decreased in 7 (L132, H157, H358, H522, H1299, H1703 and HCC2108) of 13 cell lines, and the expression of ADAMTS1 was also significantly reduced in 6 cell lines (A549, SW900, H1299, H1373, H1703 and H1793). There were no genetic alterations by PCR-SSCP and cDNA cloning in the cell lines with a decreased gene. In the cell lines with a decreased gene expression, the mRNA expression was increased significantly with treatment of 5-Aza-CdR. Conclusion: These results suggest that the ADMTS1, CLDN8 and CLDN17 may act as tumor suppressor genes.

• Korean Journal of Biological Psychiatry
• /
• v.11 no.2
• /
• pp.117-126
• /
• 2004

Objects:It has been reported that the incidence of tardive dyskinesia(TD), the remarkable abnormal involuntary movement, was higher in the schizophrenics with high blood sugar levels and that TD had been improved by small amount of insulin-injection for 90 days. And also it was generally known that the blood lipids were higher in the schizophrenics with tardive dyskinesia. Thus, we tried to replicate the correlations of abnormal involuntary movements with blood sugar levels and blood lipids in chronic schizophrenics treated with antipsychotics. Methods:Thirty-eight male schizophrenic inpatients who were stable in clinical state with medications, were included. The patients who had been already diagnosed as diabetes mellitus(DM), organic brain disorder, substance- related disorder, physical illness were excluded and also we excluded female patients to remove the hormonal effect on TD. Eleven patients who ranked higher(above five) in the Abnormal Involuntary Movement Scale(AIMS) were assigned into 2 groups, a dibenese group and a placebo group. Diabinese or placebos were administrated for 3 weeks with antipsychotics and AIMS was rechecked. Results:There were no correlations between the total AIMS scores and blood sugar and lipids levels in all subjects. The means of total and subscale scores(objective, face, and extremity) of AIMS did not reveal statistical significances between diabinese and placebo groups. However(total, jaw, face, upper arm, and objective feeling), were statistically higher in the diabinese group than those in the placebo group. And correlations of total cholesterol(TC) with fast blood sugar(FBS), weight with body mass index(BMI) and waist, total glycerol (TG) with BMI were statistically significant. Conclusion:In this study, there were statistical significances in the changes in ratings of AIMS scores between the diabinese group and the placebo group. Application of oral hypoglycemic agent might be a way of improving abnormal involuntary movements in schizophrenics with abnormal involuntary movements or TD. Althogugh it was not certain that there were correlations of abnormal involuntary movement with blood sugar and lipids, correlations of TC/TG with AIMS, of FBS with AIMS cautiously suggest that the regular check of $HbA_1C$, waist, and weight are recommended for schizophrenics.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.13 no.1
• /
• pp.13-18
• /
• 2013

CATCH 22 syndrome is a one of the most common chromosome microdeletion syndrome with multiple organ anomalies in humans, with an incidence of approximately 1:4,000 to 1:5,000 live births. It is caused by a microdeletion of 1.5 to 3.0 megabases on the long arm of chromosome 22. The phenotypic spectrum of this disorder is wide and various. A 19-year-old patient who showed delayed growth and development (Height; 110 cm, Weight; 18 kg) was referred to our department for the treatment of dental cavities. She was diagnosed as CATCH 22 syndrome in 2004. Physical examination revealed hypertelorism, a short philtrum, thick reflected lips and a small mouth. She underwent cleft palate surgery at 1 year of age and heart valve surgery due to the cardiovascular abnormality at 13 years of age. Convulsive seizures had persisted until 5 years ago but are well controlled at present. Oral examination showed poor oral hygiene, crowding, prolonged retention on #65, 75 and dental cavities on #16, 21, 65, 26, 36, and 46. Cavity treatment and prophylaxis were performed under general anesthesia. Also continuous follow-up checks have been carrying out with the periodic prophylaxis and dental home education. Problems with numerous cavities and gingivitis which can lead to specific risks are common for CATCH 22 syndrome patients. It is therefore of great importance that these patients are referred to foremost physician and dental specialist for the oral care. In addition, preventive treatment targeting the risk of dental cavities and gingivitis is especially important and, as the syndrome involves many different medical problems, the dental treatment should be carried out in collaboration with the patient's physician.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.110-114
• /
• 2017

Because the arm can't be sutured due to fracture during a elbow CT scan, a CT scan is proceeded in a state of abdomen and L-spire are overlapped which beam hardening artifact is done many times, and it often lowers the quality of elbow CT images. So there are many difficulties in reading and due to increase in radiation dose from it, the number of patient's exposure keeps increasing. In this research, it plans to improve the quality of the images by avoiding overlap with abdomen, and increasing the number of photon overlapped with lung field which the line attenuation is relatively small. The way of experiment is based on patient's right elbow and place him as head first position, then place his elbow at L2-3 level in supine position, turn about 30 degrees to the left in non-control breathing and in supine position, and compared with full inspiration after overlapping with lung. After figuring out the average value and standard deviation data using Image J program 5 times each for 16, 128 channels, the evaluation is proceeded by measuring each of CNR, MSR are statistically analyzed using SPSS program. Therefore, through positioning and inspiration during elbow CT scan, the way of inspection minimized the exposure radiation dose, and seems to be meaningful in a way to improve the quality of the images.