• 한국추진공학회지
• /
• 제7권3호
• /
• pp.53-60
• /
• 2003

한국항공우주연구원에서 개발 중인 소형항공기와 관련하여 지상에서 왕복엔진의 정적 성능을 측정하기 위한 시험장치를 개발하였다. 시험장치는 Pusher형 추진시스템을 장착하고 구동하는 장치와 엔진의 기본적인 작동 감시 및 엔진 토크와 프로펠러 추력을 비롯한 여러 성능 변수들을 측정하고 처리하는 데이터 획득 장치로 구성되었다 먼저 기본 작동시험에서 도출된 성능데이터를 원래 엔진데이터와 비교 분석하여 시험장치의 기능을 검증하였다. 성능시험은 3단계에 걸쳐 다양한 시험조건에서 수행되었으며, 엔진의 흡기압력과 토크, 배압, 연료유량, 그리고 프로펠러의 정지추력을 측정하고 분석하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제19회 학술발표대회 논문초록집
• /
• pp.37-40
• /
• 2002

The engine performance test was carried out to investigate the effects of breath and exhaust on the performance of a reciprocating engine for small aircraft. In this test, three valves to control flow areas of a inlet and two outlets were used, the engine manifold pressure and the static thrust of propeller were measured in nine breath/exhaust conditions. Generally, small variations on the performance were showed as the test conditions were changed. The manifold pressure was increased as flow area of the inlet or the outlet was decreased in normal condition, however it was decreased as both flow areas were decreased. The static thrust of propeller was showed similar as the manifold pressure.

• 한국항공운항학회지
• /
• 제15권4호
• /
• pp.9-16
• /
• 2007

Tilt rotor aircraft can take off and land vertically and cruise faster than any other helicopter. A scaled flight demonstration model of a tilt rotor aircraft has been developed by KARI. Because the flight characteristics of tilt rotor are not well known, the developed scaled model would be helpful to evaluate flight control algorithm of a full scale aircraft. The tethered hover test has been performed in order to improve hover flight characteristics of tilt rotor aircraft prior to flight test of the small scaled model. During the tethered hover test, the performance of rotor speed governor, rate SAS (Stability Augmentation System) and control surface mixers have been evaluated. We expect that the results of real flight hover test would be quite same as tethered hover test. Therefore the tethered hover test results will reduce the risk of flight test properly by fixing some of hidden problems which might occur during the flight test. This paper presents the results of tethered hover test in detail and shows how it could be final ground test before flight test. The control mixer gain and rate SAS feedback gains were modified in order to get higher controllability and stability during the tethered hover flight. The rotor governor showed that it could keep rotor RPM constant with very small deviation even during severe pilot collective input change. The tethered hover test results gave pilot and engineers confirmation and experience about the scheduled flight test.

• 한국항공운항학회지
• /
• 제31권2호
• /
• pp.89-94
• /
• 2023

Recently, domestic small airport development plans are being promoted centering on islands, and among them, Baengnyeong Island Airport is located very close to North Korea due to its geographical characteristics. In particular, since it is located in the P-518, which is prohibited airspace, it is essential to configure the arrival/departure flight procedure route similarly to the current ship in terms of securing flight safety. Therefore, in this study, a plan for airport location and facility scale was proposed by focusing on the runway operated for the purpose of aircraft operation through consultations with the Ministry of National Defense. It was proposed to meet the standards of the Airport Facility Act as an airport dedicated to domestic flights for airside facilities such as runway length and direction, target aircraft, landing pad, apron, runway and taxiway width appropriate for the topographical characteristics of Baengnyeong Island. As a result, the flight procedure is generally established as a two-way visual flight, but the 10-way arrival/departure procedure was planned to be changed to an instrument (non-precision) according to the specificity of the region. In addition, a flight procedure was established and presented for safe and systematic operation by reflecting the changes in airport facility size (landing pad, runway end safety area, etc.) following the change in instrument flight procedure in the visual flight procedure.

• 항공우주산업기술동향
• /
• 제7권2호
• /
• pp.85-94
• /
• 2009

전투기에 처음 적용되었던 Fly-By-Wire (전자식 비행제어) 시스템은 여러 가지 장점으로 인해 까다로운 인증과정을 거쳐 민간 항공기에까지 적용되었고, 최근에는 소형제트기까지 적용 범위가 확장되고 있으며 미래에는 대부분 Fly-By-Wire 항공기가 주를 이룰 것으로 전망된다. 본 논문에서는 대형여객에서 소형제트기까지 민간 항공기에 적용되는 Fly-By-Wire 시스템의 구성 및 특성 등에 대하여 기술 하였다. 특히 비행조종컴퓨터 다중화 방안과 데이터 통신 버스, 조종면 작동기, Fly-By-Wire 시스템을 통하여 적용되는 제어 법칙 등에 대한 기술 개발 동향에 대해 고찰하였다.

• Composites Research
• /
• 제25권4호
• /
• pp.105-109
• /
• 2012

최근 국내에서 미국과 상호항공안전협정 체결을 위한 소형 항공기가 연구 개발 중이다. 연구 대상 항공기는 경량화 하여 연료 절감을 위해 전기체 복합재료가 적용되었다. 그러나 복합재 구조는 외부의 충격 손상에 취약한 구조이다. 따라서 항공기 구조물은 충격 손상에 대한 압축 파손 강도를 고려하여 손상 허용 설계가 반드시 수행되어야 한다. 이는 복합재 구조 항공기 인증에 매우 중요한 요소이다. 본 연구에서는 항공기 복합재 구조에 적용된 두꺼운 적층판에 대한 손상 허용 연구를 수행하였다. 두꺼운 적층판의 세 가지 형태인 손상이 없는 시편, 구멍 손상 및 충격 손상이 적용된 시편의 압축 하중 하에서 손상 허용 기준이 평가되었다.

• 한국전자통신학회논문지
• /
• 제18권3호
• /
• pp.509-520
• /
• 2023

항공기에서 소형 제트기까지 항공기에 적용되는 플라이 바이 와이어 시스템의 구성 및 특성등에 대하여 기술 하였다. 특히 비행조종컴퓨터 다중화 방안과 데이터 통신 버스, 조종면 작동기, 플라이 바이 와이어 시스템을 통하여 적용되는 제어 법칙 등에 대한 기술 개발 동향에 대해 고찰하였다. 전투기에 처음 적용되었던 플라이 바이 와이어 시스템은 여러 가지 장점으로 인해 까다로운 인증과정을 거쳐 민간 항공기에까지 적용되었고, 최근에는 소형제트기까지 적용 범위가 확장되고 있으며 미래에는 대부분 플라이 바이 와이어 항공기가 주를 이룰 것으로 전망된다.

• 한국항공운항학회지
• /
• 제23권2호
• /
• pp.57-62
• /
• 2015

As the issuance of type certificate and production certificate for KC-100 Naraon, Korea is ranked as the State of Design and the State of Manufacture for civil aircraft specified in the Convention on International Civil Aviation. It means that another responsibilities are imposed and new frameworks are required for the airworthiness management including the continuing airworthiness. So far the minimum airworthiness management system was sufficient as the State of Registry for the aircraft operations and safety management. However, we need to establish and maintain the airworthiness management system for the effective certification and oversight of our air operators and approval holders. This paper introduces the new obligations under the Convention on International Civil Aviation, reviews the current aviation regulations and procedures and presents the strategy for the establishment of the regulatory system to ensure the airworthiness of aircraft.

• 한국항공운항학회지
• /
• 제22권4호
• /
• pp.65-74
• /
• 2014

Unmanned aerial vehicles(UAVs) refer to the aircraft which carries no human pilot and is operated under remote control or in autonomous operational mode. As the UAVs can perform the dull, dangerous and difficult missions, various kinds of UAVs with different sizes and weights have been developed and operated for both civil and military application. As the avionics and communication technology related to the UAVs are matured, the demand for the UAVs is dramatically increased. Therefore, It is important to develope airworthiness process and regulations of the UAVs to minimize related risk to the man and environment. This paper describes related regulations and classification of the small UAVs for different international airworthiness authorities. The analysis of the CS-LURS verses Stanag 4702 and Stanag 4703 can provide guidelines for the generation of the airworthiness certification criteria for the small UAVs in civil sector. This paper conducted kinetic impact energy analysis of the loss of the small UAVs control scenarios and of the very small UAVs under 66 joules. Based on the analysis, the energy impact analysis can be considered before the design certification approval for the small UAVs.

• Advances in aircraft and spacecraft science
• /
• 제2권1호
• /
• pp.95-108
• /
• 2015

Automatic Dependent Surveillance Broadcast (ADS-B) is quickly being adopted by aviation safety authorities around the world as the standard for aircraft tracking. The technology provides the opportunity for live tracking of aircraft positions within range of an ADS-B receiver stations. Currently these receiver stations are bound by land and local infrastructural constraints. As such there is little to no coverage over oceans and poles, over which many commercial flights routinely travel. A low cost space based ADS-B receiving system is proposed as a constellation of small satellites. The possibility for a link between aircraft and satellite is dependent primarily on proximity. Calculating the likelihood of a link between two moving targets when considering with the non-periodic and non-uniform nature of actual aircraft flight-paths is non-trivial. This analysis of the link likelihood and the performance of the tracking ability of the satellite constellation has been carried out by a direct simulation of satellites and aircraft. Parameters defining the constellation (satellite numbers, orbit size and shape, orbit configuration) were varied between reasonable limits. The recent MH370 disappearance was simulated and potential tracking and coverage was analysed using an example constellation. The trend of more satellites at a higher altitude inclined at 60 degrees was found to be the optimal solution.