• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.03a
• /
• pp.70-71
• /
• 1993

• Proceedings of the Korean Magnestics Society Conference
• /
• 2015.11a
• /
• pp.175-175
• /
• 2015

• Proceedings of the Korean Magnestics Society Conference
• /
• 2005.12a
• /
• pp.152-153
• /
• 2005

• Proceedings of the Korean Magnestics Society Conference
• /
• 1998.10a
• /
• pp.34-35
• /
• 1998

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.241-241
• /
• 2007

We fabricated SmBCO coated conductors(CCs) on IBAD-MgO templates using co-evaporation method. IBAD-MgO templates consist of PLD-LMO/epi-MgO/IBAD-MgO/Ni-alloy and showed good in-plane texture of below FWHM 7 degree. Evaporation rates of Sm, Ba, and Cu were precisely controlled to get the optimum composition ratio after deposition process. To optimize the oxygen partial pressure of reaction region, wide range of the partial pressure was investigated from 1 mTorr to 15 mTorr. By reducing the oxygen partial pressure to 5mTorr, (103)grains in SmBCO layer have been increased. On the other hand, there were only (001)grains in SmBCO layer deposited at 15 mTorr $O_2$. Deposition temperature was also investigated from $600^{\circ}C\;to\;800^{\circ}C$ to make high Ic SmBCO CCs. SmBCO on IBAD MgO template showed that the Ic increased gradually at higher growth temperature to $800^{\circ}C$, which the highest Jc and Ic is $2.6\;MA/cm^2$ and 500 A/cm-w., respectively.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2001.04a
• /
• pp.68-69
• /
• 2001

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.929-940
• /
• 1995

The fatigue strength and fracture topography in the friction welded interface of high speed steel (HSS-Co) to SM55C carbon steel have been investigated through the fatigue test, SEM fractograph and EDS (energy dispersive spectrometer) analysis. Three kinds of specimens used in this research are the friction welded joints, HSS-Co and SM55C carbon steel with circumferential notch, saw notch and smooth, respectively. The notch sensitivity factor, .eta. of the friction welded joints is lower than that of the base materials, and that represents a superiority of the joint performance of FRW. Fracture topography of the FRW specimens with a notch showed a cleavage or brittle appearance, while that of the FRW smooth specimen appeared to be ductile. Furthermore, although fatigue crack likely initiated near the weld interface of the FRW smooth specimen, crack propagation continued into the HAZ of SM55C steel. Finally, fatigue fractures of the base materials were associated primarily with the inclusions located at the outer periphery of the specimen.

• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.811-815
• /
• 1995

회토류계 영구자석은 종래의 Ferrite계나 Alnico계와 비교해서 대단히 강하여, 전기전자부품의 소형화에 크게 기여하고 있다. 최근에는, 전자기기산업 이외의 분야에 있어서도 그의 응용이 확대되어가고 있는 추세로 자성재료의 생산액은 매년 증가하고 있다. 회토류계 영구자석재료의 연구는 1960년대에 시작되어 Sm $Co_{5}$, Sm$_{2}$ $Co_{17}$ 화합물의 등장을 거쳐 현재는 1982년데 Sagawa 및 Croat가 독자적으로 발견한 Nd$_{2}$ Fe$_{14}$B 자석이 주류로 되고 있다. 그렇지만 이 화합물에는 다른 영구자석에 비하여 큐리온도가 낮은 결점이 있어서, 아직도 새로운 화합물의 탐색이 계속되고 있다. 그 중에서도, 1990년대에 Coey에 의해서 최초로 학회지에 보고되어진 Sm$_{2}$Fe$_{17}$N$_{x}$는, Nd$_{2}$Fe$_{14}$B와 같은 정도의 이론 최대에너지급, Sm $Co_{5}$에 대등한 거대한 이방성자장, 750K에 달하는 큐리온도등의 우수한 성질을 갖고 있어 Nd$_{2}$Fe$_{14}$B를 극복하는 자성재료로서 큰 기대가 되어진다. 되어진다.진다.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1303-1309
• /
• 2012

A novel ligand N,N'-(2,6-pyridinedicarbonyl)bis[N-(carboxymethyl)] (L1) was designed and synthesized. Four co-luminescence groups of Sm-La-pyridyl carboxylic acids systems were researched, which are $K_4Sm_{(1-x)}-La_x(L_1)Cl_3{\cdot}y_1H_2O$, $K_4Sm_{(1-x)}La_x(L_2)Cl_3{\cdot}y_2H_2O$, $K_6Sm_{2(1-x)}La_{2x}(L_3)Cl_6{\cdot}y_3H_2O$, $K_4Sm_{(1-x)}La_x(L_4)Cl_3{\cdot}y_4H_2O$. The results indicated the addition of La(III) could sensitize the luminescence of Sm(III) obviously in a certain range, enhancing emission intensity of Sm-pyridyl carboxylic acids relative to the undoped ones. The optimal mole percentages of La(III) in the mixed ions for $L_1$, $L_2$, $L_3$, $L_4$ were confirmed to be 0.6, 0.5, 0.3, 0.6, respectively. The mechanism of the fluorescence enhancement effect was discussed in detail. Furthermore, the binding interaction of $K_4Sm_{0.4}La_{0.6}(L_4)Cl_3{\cdot}5H_2O$ with bovine serum albumin (BSA) have been investigated due to its potential biological activity. The binding site number n was equal to 1.0 and binding constant $K_a$ was about $2.5{\times}10^5\;L{\cdot}mol^{-1}$.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.6
• /
• pp.618-623
• /
• 2014

This study, analyzed the waveform and mechanical properties of flux cored arc Welding on SM45C. $CO_2$ 10% + Ar 90% shows the lowest standard deviation and shunt ratio at which the arc was most stable. $CO_2$ 10% + Ar 90% is equal to $CO_2$ 20% + Ar 80%. therefore, $CO_2$ 20% + Ar 80% is the best of mixture gases. The hardness test result for the gas mixture ratio of $CO_2$ 10% + Ar 90% was HV 249.7 which is the highest measured value. According to tensile test results, the tensile strength increased with increasing Ar in the mixture gas. This was because of the inertness of the argon, which does not combine with other elements, causing $CO_2$ to combine with pearlite and ferrite and decreasing the maximum tensile strength. Microstructural examination results show that with increasing Ar, ferrite generation decreases while the mild microstructure increases which influences the hardness.