• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1529-1539
• /
• 2000

The contact procedure of access channel necessary to set up the originating call has a close relation with the performance and capacity of the base station system in CDMA cellular network. This paper investigates the structure and the operation of the backward channel of IS-95 CDMA standard and explains the related system parameters. We can derive the throughput of the CDMA access channel depending on the arrivals of the access probes per access channel slot, given the system parameters such as cell radius, the maximum number of retransmission, and the error rates of the access and paging channel. It shows that the performance in throughput is much better in the CDMA IS-95 access channel than in the slotted aloha channel. It also gives the reasonable number of the trafic channels in a cell with the given blocking probability.

• Journal of Communications and Networks
• /
• v.15 no.1
• /
• pp.87-101
• /
• 2013

In industrial applications, sensor networks have to satisfy specified time requirements of exchanged messages. IEEE 802.15.4 defines the communication protocol of the physical and medium access control layers for wireless sensor networks, which support real-time transmission through guaranteed time slots (GTSs). In order to improve the performance of IEEE 802.15.4 in industrial applications, this paper proposes a new traffic scheduling algorithm for GTS. This algorithm concentrates on time-critical industrial periodic messages and determines the values of network and node parameters for GTS. It guarantees real-time requirements of periodic messages for industrial automation systems up to the order of tens to hundreds of milliseconds depending on the traffic condition of the network system. A series of simulation results are obtained to examine the validity of the scheduling algorithm proposed in this study. The simulation results show that this scheduling algorithm not only guarantees real-time requirements for periodic message but also improves the scalability, bandwidth utilization, and energy efficiency of the network with a slight modification of the existing IEEE 802.15.4 protocol.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.308-310
• /
• 2022

With the rise of the Al wave, task-oriented dialogue systems have become one of the popular research directions in academia and industry. Currently, task-oriented dialogue systems mainly adopt pipelined form, which mainly includes natural language understanding, dialogue state decision making, dialogue state tracking and natural language generation. However, pipelining is prone to error propagation, so many task-oriented dialogue systems in the market are only for single-round dialogues. Usually single- domain dialogues have relatively accurate semantic understanding, while they tend to perform poorly on multi-domain, multi-round dialogue datasets. To solve these issues, we developed a paddle-based multi-domain task-oriented Chinese dialogue system. It is based on NEZHA-base pre-training model and CrossWOZ dataset, and uses intention recognition module, dichotomous slot recognition module and NER recognition module to do DST and generate replies based on rules. Experiments show that the dialogue system not only makes good use of the context, but also effectively addresses long-term dependencies. In our approach, the DST of dialogue tracking state is improved, and our DST can identify multiple slotted key-value pairs involved in the discourse, which eliminates the need for manual tagging and thus greatly saves manpower.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.2
• /
• pp.69-78
• /
• 2013

As vehicles become more intelligent for safety and convenience of drivers, in-vehicle networking systems such as controller are network (CAN) have been widely used due to increasing number of electronic control unit (ECU). Recently, FlexRay was developed to replace CAN protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. However, it is difficult for vehicle network designers to calculate platform configuration registers (PCR) and determine a base cycle or slot length of FlexRay. To assist vehicle network designers for designing FlexRay cluster, this paper presents automatic field bus exchange format (FIBEX) generation algorithm from CANdb information, which is de-facto standard database format for CAN. To design this program, structures of FIBEX, CANdb and relationship among PCR variables are analyzed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.9
• /
• pp.3907-3923
• /
• 2020

An enhanced irregular repetition slotted ALOHA (IRSA) protocol is proposed by using polarization characteristic of satellite link and MIMO detection in low earth orbit (LEO) satellite networks, which is dubbed polarized MIMO IRSA (PM-IRSA). In the proposed scheme, one or two packets in one slot can be decoded by employing polarized MIMO detection, and more than two collided packets in multiple slots which can construct the virtual MIMO model can be decoded by the MIMO detection algorithm. The performance of the proposed scheme is analyzed with the density evolution (DE) approach and the degree distribution is optimized to maximize the system throughput by using a differential evolution. Numerical results certify our analysis and show that the normalized throughput of the proposed PM-IRSA can achieve 1.89 bits/symbol.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.8
• /
• pp.1-7
• /
• 1997

In ahigh power amplifier design, power combiner/divider is used to connect low power amplifiers in parallel. The raidal structure of the powe combiner/divider has not only a good characteristics of port-to-port isolation but also an advantage of giving a redundancy to the structure itself by using RF switches. The parastics of a power resistor, that would be a problem in design process, are removed by both slot lines and cavity resonators, and the comon node in the circuit is rdesigned as a planar topology, and thus a new type of 4-way radial power combiner/divider is accomplished at 1840 ~ 1870 MH PCS frequency band. The insertion loss, reflection, and isolation characteristics of 40way radial power combiner/divider which can be adaptable to PCS system in this thesis are -0.3dB, -24dB,a dn -27dB respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.11
• /
• pp.32-36
• /
• 2008

In this paper, we investigate the capacity of CDMA/TDD in the inner zone of multimode scenario with dual-band operation where high frequency band is used for TDD in the inner zone and lower frequency band is utilized for FDD in the outer zone. The effects of various system parameters such as cell radius, date rate, and time slot allocation are analyzed.

• Journal of Magnetics
• /
• v.19 no.1
• /
• pp.84-89
• /
• 2014

This paper presents an analytical prediction and experimental verification of the electromagnetic performance of a parallel magnetized surface-mounted permanent magnet (SPM) motor having a fractional number of slots per pole combination. On the basis of a two-dimensional (2-D) polar coordinate system and a magnetic vector potential, analytical solutions for flux density produced by the permanent magnets (PMs) and stator windings are derived. Then, analytical solutions for back-electromotive force (emf) and electromagnetic torque are derived from these field solutions. The analytical results are thoroughly validated with 2-D nonlinear finite element (FE) analysis results. Finally, the experimental back-emf and electromagnetic torque measurements are presented to test the validity of the analysis.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.4
• /
• pp.188-195
• /
• 2001

본 논문에서는 PC 클러스터 기반 CC-NUMA 시스템을 제안하고, 시뮬레이션을 통하여 성능을 분석하였다. PC 클러스터 기반 CC-NUMA 시스템은 PC의 PCI slot에 CC-NUMA 카드를 장착함으로써 구현되며 공유메모리, 네트워크 캐쉬, 네트워크 제어 모듈을 포함한다. CC-NUMA 시스템은 PCI 버스상에 존재하는 메모리를 공유대상으로 하며, 공유메모리와 네트워크 캐쉬사이의 일관성은 IEEE SCI 표준에 의해 유지된다. CC-NUMA 시스템을 시뮬레이션 하기 위해 실행주도 시뮬레이터인 Limes를 수정하여 사용하였으며, 캐쉬 일관성 유지 알고리즘으로 SCI의 typical set을 구현하였다. 또한 기존 시스템과의 비교를 위해서 네트워크 캐쉬를 활용하지 않는 Dolphin사의 PCI-SCI 카드에 기반한 NUMA 시스템을 시뮬레이션 하였다. CC-NUMA 시스템의 성능을 측정하기 위하여 다양한 실험을 수행하였으며, 실험결과 CC-NUMA 시스템이 NUMA 시스템에 비해서 성능향상이 우수함을 알 수 있었다. 또한, CC-NUMA 시스템이 최적의 성능을 발휘하는 파라미터의 값을 도출하였으며, 이를 CC-NUMA 시스템의 실제 구현에 반영하였다.

• Transactions of Materials Processing
• /
• v.18 no.2
• /
• pp.144-149
• /
• 2009

Recently, the monitoring technology of machining process is very important to improve productivity and quality in manufacturing filed. Such monitoring technology has been performed to measurement using vibration signal, acoustic emission signal and tool dynamometer. However, micro machining is limited small-scale parts machining because micro tool is very small and weakness to generate signal in micro machining process. Therefore, this study has efficient sensing technology for real monitoring system in micro machine that is proposed to supplement a disadvantage of single-sensor by multi sensor. From experimental result, it was evaluated tool wear and cutting situation according to repetitive slot cutting condition and changing cutting condition, and it was performed monitoring spindle rpm and condition according to compare acceleration signal with current signal.