• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.119-124
• /
• 2001

본 논문에서는 WDM 기반의 Local Network에서 가변길이 메시지를 수용하기 위한 스케줄링 프로토콜을 제안하였다. 제안된 프로토콜은 제어슬롯을 선예약슬롯과 예약슬롯으로 나누어 제어패킷의 충돌로 인한 액세스 지연시간을 최소화하였다. 즉, 전송할 메시지가 있는 노드는 빈 예약슬롯이 있으면 제어패킷을 예약슬롯에 전송하고 메시지를 전송한다. 그리고 메시지의 전송이 완료된 때까지 주기적으로 제어패킷을 전송하여 가변길이의 메시지를 전송할 수 있도록 하였다. 또한 빈 예약슬롯이 없는 경우에는 선예약슬롯을 이용하여 가상 가까운 시간에 메시지를 전송하기 위한 데이터 슬롯을 미리 예약하여 제어슬롯의 충돌로 인한 재전송 횟수를 감소시켰다. 제안된 스케줄링 프로토콜은 기존의 프로토콜과는 달리 망에 새로운 노드가 추가되더라도 망을 초기화하여야 하는 문제가 없으며, 선예약슬롯을 이용하여 제어패킷의 충돌이나 목적지 충돌로 인한 재전송 횟수를 감소시켜 액세스 지연시간을 줄이는 장점을 가진다.

• 한국통신학회논문지
• /
• 제17권11호
• /
• pp.1219-1227
• /
• 1992

VXIbus란 모듈화 기기들의 상호 호환성을 위하여 VMEbus를 기본으로 구성된 업계 표준이다. VXIbus 시스템을 구현하기 위한 디바이스는 크게 register based 디바이스와 message based 디바이스로 나눌 수 있으며, 본 논문에서는 slot0모듈과 A/D변환 모듈로 이루어진 register based VXIbus 서브 시스템을 구성하였다. A/D변환모듈은 디지털 전압계로 사용되었으며, 외부 제어컴퓨터와 slot0모듈간의 통신은 LAN을 이용하였다. 한편 SCPI(Standard Commands for Programmable Instruments)는 계측기 언어의 표준화로서 외부 제어 컴퓨터에서 ASCII 형태로 slot0 모듈로 전송되어지며, 다시 2진 형태의 명령어로 변환되어 A/D변환모듈로 전송되어진다. 실험결과 측정된 전압값이 외부 제어 컴퓨터상에서 그래픽 사용자 인터페이스를 통해 관찰할 수 있도록 시스템을 구성하였다.

• 한국통신학회논문지
• /
• 제18권5호
• /
• pp.675-684
• /
• 1993

본 논문에서는 IEEE 802.6 DQDB MAN이 B-ISDN의 엑세스망으로 사용되는 경우에 필요한 연동장치(IWU : Interworking Unit)의 트래픽 특성을 시뮬레이션으로 예측하고, B-ISDN에서 정의한 서비스 등급에 따른 트래픽 처리방안과 릴레이계층, 트래픽제어 기능을 분석하였다. 연동장치에서의 트래픽처리 성능을, 슬롯의 대기지연, 슬롯 분실률, DQDB 노드간의 공정한 대역사용의 관점에서 고찰하였으며, 연동장치를 통하여 외부로 전송되는 트래픽의 비율에 따른 특성을 관찰하였다. IWU에 트래픽이 집중되어 대기지연이 증가되는 현상을 해결하는 알고리즘을 제안하였으며 실험 결과 연동장치의 버퍼가 40개 이상이면, 트래픽이 0.9 이하에서 유한한 버퍼 크기에 의한 슬롯 분실률이 거의 ‘0’이 되고 DQDB 엑세스 망의 모든 노드에서 대기지연이 15슬롯시간 이하임을 알 수 있었다.

• 한국정밀공학회지
• /
• 제31권6호
• /
• pp.491-495
• /
• 2014

We developed a compact high-precision slot-die coating machine for thin-film deposition on a flexible substrate. For smooth and precise coating, air-bearing and linear motor system were employed to minimize velocity ripple. The gap control mechanism is specially designed to have repeatability of gap between nozzle and substrate under 1 ${\mu}m$. Due to extremely precise gap control, the machine can coat thin-films down to 50 nm with $200mm{\times}100mm$ size. A thin film of Ag nano-particle ink is coated for demonstration.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.497-501
• /
• 2000

Flow over a sphere is controlled experimentally at $Re=10^5$ using electro-magnetic actuators. The electro-magnetic actuator developed in this study is composed of the permanent magnet electro-magnet membrane and slot. Eight actuators are placed inside the sphere at equally spaced intervals on a latitudinal plane and the position of the control slot is 76 from the stagnation point. Each actuator generates a periodic blowing and suction through the slot at variable frequencies of $10{\sim}140Hz$ and variable amplitudes by controlling electric signals applied to the electro-magnet. Drag on the sphere measured using a load cell is significantly reduced with control at the forcing frequencies larger than the natural shedding frequency $({\approx}14Hz\;at\;Re=10^5)$, whereas drag is slightly increased at the forcing frequency of 10Hz. It is shown from pressure measurement that the static pressure in the rear surface of the sphere is significantly increased with control, indicating that the separation is delayed due to control. Flow visualizations also show that the detaching shear layer is more attracted to the sphere center with control, the separation bubble size is significantly reduced, and motion inside the bubble is very weak, as compared to the case of uncontrolled flow.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.211-214
• /
• 2004

Microstrip slot array antenna fed by microstrip line is introduced. Slot antenna is designed to operate at 10 GHz for using in radar systems. Antenna have dielectric constant of the substrate is 2.17 (PTFE). In fact, it is study to analyze slot array antenna including feeding line with wide bandwidth. The characteristics of antenna is proposed and analyzed for instance input impedance, $S_{11}$ parameter and far field radiation patterns which these characteristics can also be calculated efficiently and accurately by using FDTD Method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.179-179
• /
• 2009

For the deposition of the semiconductor nanocrystals or quantum dots, it is required to have the substrates with smooth surface roughness. Slot-die coating method wad adopted and optimized varying the processing parameters like coating speed, gap distance, solution concentration, etc to get the smooth coated films on flexible substrates. The coating speed in slot-die method was varied from 1 m/min to 2.5 m/min focusing especially on its industrial usage. The gap distance between the substrate surface and slot-die lip was changed also to control mainly the thickness of coated films.

• Wind and Structures
• /
• 제30권5호
• /
• pp.533-546
• /
• 2020

Large Eddy Simulation (LES) is used to study the effects of steady slot suction on the aerodynamic forces of and flow around a wall-mounted finite-length square cylinder. The aspect ratio H/d of the tested cylinder is 5, where H and d are the cylinder height and width, respectively. The Reynolds number based on free-stream oncoming flow velocity U_∞ and d is 2.78×10⁴. The suction slot locates near the leading edge of the free end, with a width of 0.025d and a length of 0.9d. The suction coefficient Q (= U_s/U_∞) is varied as Q = 0, 1 and 3, where U_s is the velocity at the entrance of the suction slot. It is found that the free-end steady slot suction can effectively suppress the aerodynamic forces of the model. The maximum reduction of aerodynamic forces occurs at Q = 1, with the time-mean drag, fluctuating drag, and fluctuating lift reduced by 3.75%, 19.08%, 40.91%, respectively. For Q = 3, all aerodynamic forces are still smaller than those for Q = 0 (uncontrolled case), but obviously higher than those for Q = 1. The involved control mechanism is successfully revealed, based on the comparison of the flow around cylinder free end and the near wake for the three tested Q values.

• Journal of Communications and Networks
• /
• 제15권1호
• /
• pp.77-86
• /
• 2013

Cognitive radio (CR) has emerged as one of effective methods to enhance the utilization of existing radio spectrum. Main principle of CR is that secondary users (SUs) are allowed to use the spectrum unused by primary users (PUs) without interfering PU's transmissions. In this paper, PUs operate on a slot-by-slot basis and SUs try to exploit the slots unused by PUs. We propose OSA protocols in the single channel and we propose an opportunistic spectrum access (OSA) protocols in the multi-channel cognitive radio networks with one control channel and several licensed channels where a slot is divided into contention phase and transmission phase. A slot is divided into reporting phase, contention phase and transmission phase. The reporting phase plays a role of finding idle channels unused by PUs and the contention phase plays a role of selecting a SU who will send packets in the data transmission phase. One SU is selected by carrier sense multiple access / collision avoidance (CSMA/CA) with request to send / clear to send (RTS/CTS) mechanism on control channel and the SU is allowed to occupy all remaining part of all idle channels during the current slot. For mathematical analysis, first we deal with the single-channel case and we model the proposed OSA media access control (MAC) protocol by three-dimensional discrete time Markov chain (DTMC) whose one-step transition probability matrix has a special structure so as to apply the censored Markov chain method to obtain the steady state distribution.We obtain the throughput and the distribution of access delay. Next we deal with the multi-channel case and obtain the throughput and the distribution of access delay by using results of single-channel case. In numerical results, our mathematical analysis is verified by simulations and we give numerical results on throughput and access delay of the proposed MAC protocol. Finally, we find the maximum allowable number of SUs satisfying the requirements on throughput and access delay.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2411-2418
• /
• 2017

This study focuses on the effects of using open stator slots in an interior permanent magnet traction motor with a magnetic slot wedge design in order to increase the power density at its base speed. In addition, such a configuration reduces the torque ripple under field-weakening conditions. Five different wedge models were selected, each of which was evaluated using a finite element analysis (FEA). Based on the initial model, we designed magnetic slot wedges for maximum back-EMF and minimum cogging torque. In addition, the d-q axis inductance was slightly altered due to the magnetic slot wedges. Finally, we analyzed the performance of a traction machine under field weakening control. Moreover, we have outlined the requirements for an ideal magnetic slot wedge design.