• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.260-267
• /
• 2003

The wideband characteristics of planar antennas with a wide radiating slot have been examined in this paper. A various resonance modes are generated in the wide slot and the wideband characteristics are enhanced by impedance match at each resonance frequencies. In this process, the geometry effects on the impedance match were extracted and it was found that a round corner rectangular slot antenna has more stable impedance match over a wide frequency range than a normal rectangular slot antenna. The round corner rectangular slot antenna is fabricated to verify the wideband characteristics and its measured bandwidth is almost 2 octaves(2.08 ㎓~8.25 ㎓) with VSWR$\leq$2.

• ETRI Journal
• /
• v.40 no.5
• /
• pp.561-569
• /
• 2018

Modern communication systems employ wideband antennas with circular polarization (CP) radiation. In this work, asymmetric modified bow-tie (ABT) and symmetric modified bow-tie (SBT) slotted circularly polarized single-point probe-fed circular patch antennas with dimensions of $40mm{\times}40mm$ for wideband applications are proposed. A 10 dB RL bandwidth of 350 MHz with CP, 3 dB axial ratio (AR) bandwidth of 100 MHz, peak gain of 4.9 dBic, and 10 dB RL bandwidth of 530 MHz with CP, 3 dB AR bandwidth of 140 MHz, peak gain of 5 dBic are obtained for ABT and SBT slotted circular patch antennas, respectively. The proposed SBT slotted patch is scaled up and down to $50mm{\times}50mm$ and $30mm{\times}30mm$, respectively. The proposed scaled-up version offers 10 dB RL and 3 dB AR bandwidths of 340 MHz and 80 MHz, with a peak gain of 5 dBic. The scaled-down version offers 10 dB RL and 3 dB AR bandwidths of 710 MHz and 180 MHz, with a peak gain of 5.25 dBic. These prototypes are suitable to work in IEEE 802.11a WLAN, ISM, and IEEE 802.11ac applications. The measured and simulated results are then discussed and compared.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.793-799
• /
• 2018

An improved design of Ultra Wide Band(UWB) Bow-Tie antenna, which can control an enhanced wide stop-band, is presented. The mutually coupled slot-pair improves and controls the rejection band. The UWB antenna is composed of an electromagnetically coupled Bow-Tie patch and a parasitic ground patch, whose working frequency is extended to full UWB range in this work. By adding slot-pairs on the main patch and optimizing, they can give any requested wide rejection bands and sharp skirt characteristics, as is often required for UWB antennas and multi-band antennas. All the parameters are precisely calculated by an adequate optimization method. The Particle Swarm Optimization(PSO) technique is appropriately adopted. The proposed design and method is proved to give and control the sharp-skirt wide stop-band to UWB Bow-Tie antennas.

• ETRI Journal
• /
• v.45 no.4
• /
• pp.581-593
• /
• 2023

This paper proposes four-ring slot resonator-based MIMO antennas of 75×150 mm² without and with CSRR structures in the sub-6-GHz range. These orthogonal-fed antennas have shown diverse characteristics with dual polarization. L-shaped parasitic structures have increased the isolation (i.e., >40 dB) in the single-element antenna over the band of 3.4 GHz-3.8 GHz. A set of three CSRR structures in the MIMO antenna reduced the coupling between antenna ports placed in an inline arrangement and enhanced the isolation from 12 dB to 20 dB and the diversity characteristics. The S-parameters of both MIMO antennas are measured and used to evaluate MIMO parameters like ECC, TARC, MEG, and channel capacity loss. The simulation results show the variations in the gain and directivity on exciting linear and dual polarizations. The diversity performance of the reported MIMO antennas is suitable for 5G applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.894-900
• /
• 2004

There are many types of circularly polarized(CP) microstrip antenna elements, which are used as a good unit radiator. Since an advantage of CP antenna is no strict alignment requirements between Rx and Tx system, the printed antennas with circular polarization are very often used in numerous satellite and mobile radio systems. In order to realize the broad bandwidth of 3 dB axial ratio and impedance of CP microstrip antenna, complex feed structure and tri-plate patch element have been researched. This paper describes a design of wideband microstrip cross slot array antennas with circular polarization. The proposed antenna is composed of an open-ended microstrip feed line as a feeder and a cross slot as a radiator for circular polarization. To realize the wide bandwidth, tri-plate structure are considered and cross slot is electromagnetically coupled with feed line. Optimum parameters of 1-element cross slot antenna are analyzed and designed by method of moments. These parameters are also applied to may antennas design considered the mutual coupling between radiating elements. Right hand circular polarization(RHCP) and left hand circular polarization(LHCP) of the proposed antenna are easily controlled by asymmetrical cross slot structure and slot position. In 1-element and 15-element cross slot array antenna, the good axial ratio of 1 dB below and the broad bandwidth characteristics of antenna are obtained.

• Journal of electromagnetic engineering and science
• /
• v.13 no.2
• /
• pp.63-72
• /
• 2013

The ultra-wideband (UWB) spectrum available for commercial applications has offered us an opportunity to achieve high-speed wireless communications and high-accuracy location applications. As one of key research areas in UWB technology, a lot of innovative broadband and miniaturization techniques for UWB antennas have been greatly invented and developed for years. This paper reviews the development of UWB antenna design in the past decade. Starting with a brief introduction of the specific requirements and promising applications of UWB systems, the unique design challenges of UWB antennas are highlighted. Next, the important milestones of UWB antenna designs are briefed. After that, a variety of planar UWB antennas invented for broadband operation, miniaturization, and multiple functions are introduced. Last, the comments on the development of UWB antennas in future are shared.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.820-825
• /
• 2008

A method to improve isolation characteristics of internal MIMO antenna systems for wireless portable devices operating in the $2.3{\sim}2.4$ GHz band is presented. The proposed system incorporates multiple pairs of L-slots between the two antennas in the ground plane, which operate like a band-stop filter, suppressing mutual coupling between the antennas and resulting in improved isolation. A MIMO antenna system with 6 pairs of L-slots shows reflection loss of -26.4 dB and isolation of -37.5 dB.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.231-232
• /
• 2008

The proposed cavity-backed slot antenna is comprised of baffles, reflectors and thick ground plane. The baffles and reflectors are used to increase an antenna gain, thus reducing the coupling among slots on a thick ground plane. The height of the baffle and reflector were altered and the characteristics of corresponding $2{\times}2$ cavity-backed slot array antennas were measured separately. Themeasured antenna gains were above 15dBi, at f=42GHz and a wide impedance bandwidth over 27% at a center frequency of 42GHz.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.2
• /
• pp.39-44
• /
• 1994

A theoretical method has been considered for the analysis of a cylindrical edge-slot antenna which belongs to a class of circumferential slot antennas that are suitable for conformal mounting on conducting bodies of revolution. A coupled integral equation is formulated for unknown magnetic currents of both the coaxial aperture and the edge slot, and solved by the moment method. Theoretical values for reflection coefficient obtained based upon the method are compared with our experimental values and other author's results available. There arre good agreement between them.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.103-109
• /
• 2006

In this paper, single-feed equilateral triangular microstrip antennas(ETMA) for circular polarization(CP) are designed and studied experimentally. It is demonstrated that by embedding a narrow slot or a cross of unequal slot lengths in the triangular patch circularly polarized radiation RHCP(right-hand circularly polarized wave), LHCP(left-hand circularly polarized wave) of microstrip antennas can easily be achieved using by strategically positioned coaxial single probe feed. And the size of a triangular microstrip patch antenna is smaller than that of a conventional rectangular or circular patch at a given frequency. A single-feed ETMA with a horizontal narrow slot is printed on the substrate of 60 mils thick and the other ETMA with a corss slot of unequal slot lengths is printed on the same substrate. The antenna radiation characteristics are calculated by ENSEMBLE(Ver. 5.0) software, and compared with the experimental results. This results show that the antenna size reduction of about $17%{\sim}2l%$ is obtained as compared to the regular-size CP design.