• 기술사
• /
• 제18권3호
• /
• pp.21-27
• /
• 1985

Earthen mass located beneth a sloping group surface, whether natural or manmade, have a tendency to move downward and outward under the influence of gravity. Unless this tendency is suitably counteracted by the Shearing resistances within the mass, a landslide occurs. Avoiding such instabilities is a major concern of the geotechnical engineer. The shearing behavior of a soil is determined empirically, i.e., by field tests or laboratory tests. This results are applied to the slope stability analysis. The factor of safety for slope stability analysis is much more sensitive to the choice of strength parameters as interpreted from soil tests than to the choice of the computational method of analysis. This paper was investigated the influence of the change in the factor of safety due to a change in one of the parameters, relative to the total change in the factor of safety due to change in all parameters. A conclusion may be reached with respect to the required precision definition of the different variables to limit uncertainties in the factor of safety to tolerable levels.

• 농촌지도와개발
• /
• 제16권1호
• /
• pp.51-67
• /
• 2009

This study was carried out to investigate the major factors of the successful development of Doi Chaang Coffee Complex, Chiang Rai of Thailand. Data were gathered through field survey, library research and internet so on. Interviews were conducted with specialist, community leaders, board member of Doi Chaang Coffee Company from 14 to 19, January 2007. The major factors for the successful development observed were as follows: 1) Successful selection of crops and farming system(SALT) with regards of slopes and meteorological condition; 2) Leadership of the King of Thailand and the chief of Akha in terms of attitudinal change of hill-tribes in agriculture extension; 3) supporting by Royal Project Foundation; 4) Quality control through post harvest management by cooperative system; 5) Cooperation between the Coffee Producers' Cooperatives of Thailand and for the international Doi Chaang Coffee Corporation of Canada in terms of fair trade and so on.

• 한국연초학회지
• /
• 제15권1호
• /
• pp.57-62
• /
• 1993

Ridger and vinyl mulcher for 8-10 PS power tiller which were distributed at the rate of one out of 2.3 farm households in Korea, was developed to ease the labor shortage of tobacco production. Devices wheel shaft extension by 30cm at both sides improved the stability of straight drive and enabled to save required labor hours by 50% for ridging at sloping field. Screw type blades were attached on center drive rotavator shaft, gear set was deviled to reverse the rotavator, and it was good at need to adjust the width and height for ridge. As the results, required labor hours for ridging and vinyl mulching could be saved by 90% as compared to conventional manual method after cattle plowing, and by 50% as compared to conventional power tiller method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.160.1-160.1
• /
• 2011

In this study, the influence of methodology of assessing water levels on the discharge coefficient of sluice for tidal power generation was investigated. A physical experiment was performed in a planar open channel by installing 1/70 scale model of the sluice caisson in the planar open channel. In front of and behind the sluice model, sloping bathymetry was made to reproduce corresponding field condition. By analyzing the experimental results, it was found that the location of measuring water levels significantly affects the estimates of the discharge coefficient, due to the variability of the parameter according to the head difference between the measuring locations. Therefore, it is necessary to be careful in estimating and utilizing the discharge coefficient in the relevant study of a tidal power generation.

• 한국해안해양공학회지
• /
• 제6권3호
• /
• pp.260-265
• /
• 1994

대규모 흐름이 존재하는 불규칙한 해역에서 새로운 타원형 파동방정식을 유도하고, 유한차분법을 이용한 효율적인 수치모형을 개발하였다. 이때 청원형 방정식은 초기식 문제의 해법과 유사한 방법을 사용하여 해를 구하였다. 이 방법은 불규칙파의 변형을 계산하는 데 특히 효과적이며 수리모형 실험결과(Hiraishi, 1991)와 잘 일치하였다. 마지막으로 수중천퇴가 존재하는 완경사 해역에서 파랑과 흐름의 상호작용에 의한 수치해를 예시하였다.

• 한국항해항만학회지
• /
• 제38권4호
• /
• pp.421-427
• /
• 2014

In order to protect coastal facilities mainly from wave and current actions, the self-locking eco blocks constituting elements of protecting shore structures against scouring were designed. These blocks are adapted to the sloping bottom, coastal dunes, and submerged coastal pipelines, counteracting the destructive and erosive impulse action. A series of laboratory experiments has been conducted to investigate the reflection of water waves over and against a train of protruded or submerged shore structures and compare the reflecting capabilities of incident waves including wave forces. In this study the hydraulic model experiment was conducted to identify the performance of newly designed water affinity eco blocks to keep the coast slope and bottom mound from scouring by reduction of the wave reflection and to convince stability of the block placement. Revised design of each block element was also tested for field conditions. From the result of experiments, the field applicability of the developed blocks and placement was discussed afterward.

• 한국토양비료학회지
• /
• 제43권6호
• /
• pp.804-811
• /
• 2010

경사지 논토양에서 밭작물 재배확대를 위한 합리적인 배수개선 방법을 개발하기 위하여 "배수불량"인 경사지 논토양 (경사 7-15%, 지산통)을 대상으로 배수조건에 따라 "매우불량"인 논 2개 필지, "약간불량"인 논 2개 필지의 논둑아래 기저부에 1열로 명거 (겉도랑 배수), 비닐차단막, 암거 (속도랑 배수), 관다발 등 네 가지 종류의 배수시설을 설치하여 공간상의 위치에 대한 상관관계를 분석하는 지구통계적 방법 (Geostatistical methods)를 이용하여 저비용의 실용적 배수방법을 개발하기 위해 배수개선 방법에 따른 배수개선 효과를 비교 분석하여 다음과 같은 결론을 얻었다. TDR 이용하여 측정한 배수방법별 토양수분함량의 기술통계량을 분석한 결과 배수개선 방법별 평균수분함량은 명거배수 (36.17 mm), 비닐차단막 (32.87 mm), 관다발 (28.71 mm), 암거배수 (23.21 mm) 순으로 낮은 경향을 보였으며, 또한 암거배수 처리구에서의 변이계수가 13.0%로 명거배수 (23.4%), 비닐차단막 (22.2%), 관다발 (15.1%)에 비해 포장 내에서 수분함량이 균일한 것으로 나타났다. 토양수분함량의 이론적 반베리오그램을 분석한 결과 배수등급별 문턱값 (sill)은 배수가 약간불량지에 비해 매우 불량지에서 배수개선 방법별 차이가 뚜렷하였으며, 특히 배수 매우불량지의 암거배수 처리구에서 문턱값은 9.7로 명거배수 (86.2), 비닐차단막 (66.8), 관다발 (15.7)에 비해 낮아 변이가 적고 균일성이 높아 암거배수에 의한 배수개선 효과가 큰 것으로 나타났다. 따라서 "배수불량"인 경사지 논에서는 논둑 밑 1열의 암거배수시설을 설치로 논에서 밭작물의 안정적인 생산과 농지자원의 이용전환 즉 논을 밭으로 이용해야 하는 범용농지 기반조성에 조성을 위한 저비용의 실용적인 배수개선 방법개발에 기여할 것으로 본다.

• 대한방사선치료학회지
• /
• 제8권1호
• /
• pp.55-61
• /
• 1996

A radiation beam incident on irregular or sloping surface produces an inhomogeneity of absorbed dose. The use of a tissue compensator can partially correct this dose inhomogeneity. The tissue compensator should be made based on experimentally measured thickness ratio. The thickness ratio depends on beam energy, distance from the tissue compensator to the surface of patient, field size, treatment depth, tissue deficit and other factors. In this study, the thickness ratio was measured for various field size of $5cm{\times}5cm,\;10cm{\times}10cm,\;15cm{\times}15cm,\;20cm{\times}20cm$ for 4MV X-ray beams. The distance to the compensator from the X-ray target was fixed, 49cm, and measurement depth was 3, 5, 7, 9 cm. For each measurement depth, the tissue deficit was changed from 0 to(measurement depth-1)cm by 1cm increment. As a result, thickness ratio was decreased according to field size and tissue deficit was increased. Use of a representative thickness ratio for tissue compensator, there was $10\%$ difference of absorbed dose but use of a experimentally measured thickness ratio for tissue compensator, there was $2\%$ difference of absorbed dose. Therefore, it can be concluded that the tissue compensator made by experimentally measured thickness ratio can produce good distribution with acceptable inhomogeneity and such tissue compensator can be effectively applied to clinical radiotherapy.

• 대한방사선치료학회지
• /
• 제1권1호
• /
• pp.63-69
• /
• 1985

High energy electron beams took effect for tumor radio-therapy, however, had a lot of problems in clinical application because of various conversion factors and complication of physical reactions. Therefore, we had experimentally studied the important properties of high energy electron beams from the linear accelerator, LMR-13, installed in Yonsei Cancer Center. The results of experimental studies on the problems in the 8, 10, 12 Mev electron beam therapy were reported as following. 1. On the measurements of the outputs and absorbed does, the ionization type dosimeters that had calibrated by $^{90}Sr$ standard source were suitable as under $3\%$ errors for high energy electrons to measure, but measuring doses in small field sizes and the regions of rapid fall off dose with ionization chambers were difficult. 2. The electron energy were measured precisely with energy spectrometer consisted of magnet analyzer and tele-control detector and the practical electron energy was calculated under $5\%$ errors by maximum range of high energy electron beam in the water. 3. The correcting factors of perturbated dose distributions owing to radiation field, energy and material of the treatment cone were checked and described systematically and variation of dose distributions due to inhomogeneous tissues and sloping skin surfaces were completely compensated. 4. The electron beams, using the scatters; i.e., gold, tin, copper, lead, aluminium foils, were adequately diffused and minimizing the bremsstrahlung X-ray induced by the electron energy, irradiation field size and material of scatterers, respectively. 5. Inproving of the dose distribution from the methods of pendulum, slit, grid and focusing irradiations, the therapeutic capacity with limited electron energy could be extended.

• Journal of Radiation Protection and Research
• /
• 제3권1호
• /
• pp.6-22
• /
• 1978

High energy electron beams took effect for tumor radio-therapy, however, had a lot of problems in clinical application because of various conversion factors and complication of physical reactions. Therefor, we had experimentally studied the important properties of high energy electron beams from the linear accelerator, LMR-13, installed in Yonsei Cancer Center. The results of experimental studies on the problems in the 8, 10, 12 Mev electron beam therapy were reported as following. 1. On the measurements of the outputs and absorbed doses, the ionization type dosimeters that had calibrated by $^{90}Sr$ standard source were suitable as under 3% errors for high energy electrons to measure, but measuring doses in small field sizes and the regions of rapid fall off dose with ionization chambers were difficult. 2. The electron energy were measured precisely with energy spectrometer consisted of magnet analyzer and tele-control detector and the practical electron energy was calculated under 5% errors by maximum range of high energy electron beam in the water. 3. The correcting factors of perturbated dose distributions owing to radiation field, energy and material of the treatment cone were checked and described systematically and variation of dose distributions due to inhomogeneous tissues and sloping skin surfaces were completely compensated. 4. The electron beams, using the scatterers; ie., gold, tin, copper, lead, aluminium foils, were adequately diffused and minimizing the bremsstrahlung X-ray induced by the electron energy, irradiation field size and material of scatterers, respectively. 5. Inproving of the dose distribution from the methods of pendulum, slit, grid and focusing irradiations, the therapeutic capacity with limited electron energy could be extended.