• 한국측량학회지
• /
• 제37권5호
• /
• pp.315-322
• /
• 2019

DSM (Digital Surface Model) is a digital representation of ground surface topography or terrain that is widely used for hydrology, slope analysis, and urban planning. Aerial photogrammetry and LiDAR (Light Detection And Ranging) are main technology for urban DSM generation but high-resolution satellite imagery is the only ingredient for remote inaccessible areas. Traditional automated DSM generation method is based on correlation-based methods but recent study shows that a modern pixelwise image matching method, SGM (Semi-Global Matching) can be an alternative. Therefore this study investigated the application of SGM for Kompsat satellite data of KARI (Korea Aerospace Research Institute). Firstly, the sensor modeling was carried out for precise ground-to-image computation, followed by the epipolar image resampling for efficient stereo processing. Secondly, SGM was applied using different parameterizations. The generated DSM was evaluated with a reference DSM generated by the first pulse returns of the LIDAR reference dataset.

• 한국환경복원기술학회지
• /
• 제5권2호
• /
• pp.1-8
• /
• 2002

The aim of this study was to generate systemic data for the aquatic plant distribution according to water depth and crossing slope in the shoreline. The results of this study were as follows; 1. Anxiety to 0 near area Bidens frondosa, Scirpus tabernaemontani, Carex dispalata etc. total class 21 observe, and Phragmites communis, Iris pseudoacorus etc. class 6 of anxiety 0-70cm extent examined. Class 21 of anxiety observed all such as Bidens frondosa, Scirpus tabernaemontani, Carex dispalata in near area to 0, and Phragmites communis, Iris pseudoacorus etc. class 6 of anxiety 0-70cm extent examined. Anxiety 70-100cm extent Nymphoides indica, Ttapa japonica etc.. class 2 appeared to line Zizania latifolia, Typha angustata back 2 papers, 130cm and examined that Nelumbo nucifera was limit anxiety state 230cm. 2. Aquatic plants of Phragmites communis, Zizania latifolia, Typha angustata etc. range mainly to gentle gradient of slant 10 degree low and distribution pattern was ranging by Zizania latifolia, Typha angustata, Phragmites communis period of ten days from deepwater place. Nelumbo nucifera was forming become independent stock keeping away invasion of plant that ability to breed was different because was prosperous. Slant 10 bores was growing near sleep in been strange steep slope earth and distribution of emerged plant appeared punily and emerged plant and swampy land plant were ranged extensively in gentle gradient of 10 degree low. 3. On lake surrounding plant when wish to do distribution of natural conditions reference need to. That is, gentle gradient and distribution form of steep slope earth are different, and same pitch must consider enough this because appear as distribution, distribution according to that some plant species were growing was different.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.193-193
• /
• 2017

Trend analysis can enhance our knowledge of the dominant processes in the area and contribute to the analysis of future climate projections. The results of previous studies in South Korea showed that southeast regions of Korea had the highest value of evapotranspiration. Thereby, it is of interest to determine the trend analysis in hydrological variables in this area. In this study, the recent 35 year trends of precipitation, reference evapotranspiration, and aridity index in monthly and annual time scale will be analyzed over three stations (Pohang, Daegu, and Pusan) of southeast Korea. After removing the significant Lag-1 serial correlation effect by pre-whitening, non-parametric statistical Mann-Kendall test was used to detect the trends. Also, the slope of trend of the Mann-Kendall test was determined by using Theil-Sen's estimator. The results of the trend analysis of reference evapotranspiration on the annual scale showed the increasing trend for the three mentioned stations, with significant increasing trend for Pusan station. The results obtained from this research can guide development if water management practices and cropping systems in the area that rely on this weather stations. The approaches use and the models fitted in this study can serve as a demonstration of how a time series trend can be analyzed.

• 제어로봇시스템학회논문지
• /
• 제4권2호
• /
• pp.246-255
• /
• 1998

This paper presents a novel method for real-time malfunction detection of plasma etching process using EPD signal traces. First, many reference EPD signal traces are collected using monochromator and data acquisition system in normal etching processes. Critical points are defined by applying differentiation and zero-crossing method to the collected reference signal traces. Critical parameters such as intensity, slope, time, peak, overshoot, etc., determined by critical points, and frame attributes transformed signal-to symbol of reference signal traces are saved. Also, UCL(Upper Control Limit) and LCL(Lower Control Limit) are obtained by mean and standard deviation of critical parameters. Then, test EPD signal traces are collected in the actual processes, and frame attributes and critical parameters are obtained using the above mentioned method. Process malfunctions are detected in real-time by applying SPC(Statistical Process Control) method to critical parameters. the Real-time malfunction detection method presented in this paper was applied to actual processes and the results indicated that it was proved to be able to supplement disadvantages of existing quality control check inspecting or testing random-selected devices and detect process malfunctions correctly in real-time.

• Journal of Korean Neurosurgical Society
• /
• 제64권6호
• /
• pp.913-921
• /
• 2021

Objective : Accurate measurement of T1 slope (a component of T1s minus cervical lordosis [CL]) is often constrained by anatomical limitations. In this situation, efforts should be made to find the exact meaning of T1s-CL and whether there are any alternatives to it. Methods : We enrolled 117 patients who received two-level anterior cervical discectomy and fusion (ACDF). Occipital slope, C2 slope (C2s), C7 slope (C7s), T1, O-C2 angle (O-C2A), C2-7 angle (C2-7A), O-C7 angle (O-C7A), T1s-CL, C7-T1 angle (C7-T1A), and C2-7 sagittal vertical axis were measured. We determined 16° (T1s-CL) as the reference point for dividing subjects into the mismatch group and the balance group, and a comparative analysis was performed. Results : The mean value of C7-T1A was constantly maintained within 2.6° peri-operatively. In addition, C2s and T1s-CL showed the same absolute change (Δ|0.8|°). The mean values of T1s-CL of the mismatch and balance groups were 23.0° and 7.6°, respectively. The five factors with the largest differences between the two groups were as follows : C2s (Δ13.3°), T1s-CL (Δ15.4°), O-C2A (Δ8.7°), C2-7A (Δ14.7°), and segmental angle (Δ7.9°) before surgery. Only four factors showed statistically significant change between the two groups after ACDF : T1s-CL (Δ4.0° vs. Δ0.2°), C2s (Δ3.2° vs. Δ0.7°), O-C2A (Δ2.6° vs. Δ1.3°), C2-7A (Δ6.3° vs. Δ1.3°). A very strong correlation between T1s-CL and C2s was also found (r=|0.88-0.96|). Conclusion : C2s itself may be the essential key to represent T1s-CL. The amounts and directions of change of these two factors (T1s-CL and C2s) were also almost identical. The above phenomenon was re-confirmed once again through the correlation analysis.

• 지질공학
• /
• 제29권2호
• /
• pp.85-97
• /
• 2019

암반으로 구성되어 있는 급경사($65{\sim}80^{\circ}$) 암반사면들이 장기간 안정한 상태로 유지되고 있는 것을 관찰할 수 있다. 이와 유사한 지반상태로 이루어진 굴착 암반사면에서 불연속구조가 비탈면의 안정성에 유리한 방향으로 분포하고 있는 경우에는 발파암 경사기준인 1 : 0.5 ($63^{\circ}$)보다 급한 경사를 적용할 수 있을 것이다. 비탈면 설계기준의 경사 결정 과정에서 급경사로 적용할 수 있는 예비 암반조건이 정량적으로 설정되어 있으면 설계 실무측면에서 지침으로 활용할 수 있을 것이다. 이 연구에서는 상기 암반을 양호한 연속체 암반으로 정의하고, 양호한 연속체 암반조건에 대해 공학적인 준거를 제공할 목적으로 범용적인 RMR, SMR, GSI 분류를 활용하여 정량적인 설정기준 범위를 제안하고자 하였다. 연구방법으로는 다음과 같다. 암석종류별로 급경사 $65{\sim}80^{\circ}$)에서 안정한 비탈면을 연구 대상으로 선정하고, Face mapping 결과를 반영하여 RMR과 SMR 및 GSI 분류하였다. Hoek-Brown 파괴기준을 활용하여 산정된 강도정수를 현 상태의 암반사면 안정해석에 적용하여 나타난 결과를 검토하였다. 급경사로 안정하게 유지되는 지반조건으로서 예비기준의 타당성을 검증하기 위한 것이다. 상기 연구방법으로 분석 검토한 결과, 양호한 연속체 암반비탈면은 Basic RMR ${\geq}50$ (퇴적암에서는 45), GSI SMR ${\geq}45$로 설정할 수 있을 것으로 분석되었다. 한계평형 해석의 안전율은 Fs = 14.08~67.50 (평균 32.9)이고, 유한요소해석의 변위는 0.13~0.64 mm (평균 0.27 mm)이다. 이는 급경사($65{\sim}80^{\circ}$)로 오랜 기간 동안 안정하게 유지되고 있는 양호한 연속체 암반사면의 안정성을 정량적으로 표현하고 확인하는 결과로 볼 수 있다. 양호한 연속체 암반사면에 대한 암반기준 설정범위는 자료가 축적되면 좀 더 세부적인 설정기준을 확립할 수 있을 것이고 추후 연구과제이기도 하다. 1 : 0.1~0.3의 급경사에서도 안정할 경우에, 해외 설계기준 및 사례를 참고하여 급경사의 상한 기준을 1 : 0.3으로 설계하면 경제성과 친환경성을 확보하는 이점이 있게 된다. 또한 굴착기술과 식생기술 발달 및 다양한 친환경적 사면 설계기법으로 급경사에 따른 심리적 불안감과 급격한 지반이완을 극복할 수 있을 것이다.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.961-968
• /
• 2003

In order to reach the high electrical quality of organic thin film transistors (OTFTs) such as high mobility and on-off current ratio, it is strongly desirable to study the enhancement of electrical properties in OTFTs. Here, we report the novel method of hydrogen plasma treatment to improve electrical properties in inverted staggered OTFTs based on pentacene as active layer. To certify the effect of this method, we compared the electrical properties of normal device as a reference with those of device using the novel method. In result, the normal device as a reference making no use of this method exhibited a field effect mobility of 0.055 $\textrm{cm}^2$/Vs, on/off current ratio of 10$^3$, threshold voltage of -4.5 V, and subthreshold slope of 7.6 V/dec. While the device using the novel method exhibited a field effect mobility of 0.174 $\textrm{cm}^2$/Vs, on/off current ratio of 10$\^$6/, threshold voltage of -0.5 V, and subthreshold slope of 1.49 V/dec. According to these results, we have found the electrical performances in inverted staggered pentacene TFT owing to this method are remarkably enhanced. So, this method plays a key role in highly improving the electric performance of OTFTs. Moreover, this method is the first time yet reported for any OTFTs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.668-672
• /
• 2003

In order to reach the high electrical quality of organic thin film transistors (OTFTs) such as high mobility and on-off current ratio, it is strongly desirable to study the enhancement of electrical properties in OTFTs. Here, we report the novel method of hydrogen $(H_{2})$ plasma treatment to improve electrical properties in inverted staggered OTFTs based on pentacene as active layer. To certify the effect of this method, we compared the electrical properties of normal device as a reference with those of device using the novel method. In result, the normal device as a reference making no use of this method exhibited a field effect mobility of 0.055 $cm^{2}/Vs$, on/off current ratio of $10^{3}$, threshold voltage of -4.5 V, and subthreshold slope of 7.6 V/dec. While the device using the novel method exhibited a field effect mobility of 0.174 $cm^{2}/Vs$, on/off current ratio of $10^{6}$. threshold voltage of -0.5 V, and subthreshold slope of 1.49 V/dec. According to these results, we have found the electrical performances in inverted staggered pentacene TFT owing to this novel method are remarkably enhanced. So, this method plays a key role in highly improving the electric performance of OTFTs. Moreover, this method is the first time yet reported for any OTFTs

• 한국측량학회지
• /
• 제11권2호
• /
• pp.35-41
• /
• 1993

평균해면은 육지표고의 기준면으로, 지역적인 평균해면차는 측지수준망 설정에 중대한 영향을 미친다. 측지학자와 해양학자들은 동서방향의 평균해면차에 대해서는 견해를 같이 하면서도, 남북방향의 평균해면차에 대해서는 서로 상반되는 견해를 보여왔을 뿐만 아니라, 그 불일치의 원인이 서로 상대방의 수준측량방법에 내재된 정오차에 있다고 주장해 왔다. 해면경사는 각 지역 검조소의 평균해면으로부터 구한 TBM의 높이와 측지수준망에 의해 정해진 그 점의 높이의 차로부터 산정된다. 인천항의 평균해면을 기준으로 하여, 주요 항만에 위치한 검조소의 평균해면과 우리나라 1등 수준망으로부터 연장한 표고차로부터 우리나라 연안의 해면경사를 산정하였다. 본 연구의 결과, 우리나라 연안은 남북방향으로 위도당 5.5cm 북향상승하는 해면경사를 보였고, 동일 위도상에서 동해안이 황해안보다 약 5cm 정도 높은 해면고를 나타내었다. 이런 결과는 잠정적인 것으로, 앞으로 해양 및 기상의 영향이 소거된 엄밀한 의미의 평균해면이 산정된다면, 보다 확실한 해면경사를 추정할 수 있을 것이다.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.131-137
• /
• 2008

SCP(Sand Compaction Pile) method that forms a composite ground by driving compacted sand piles into the soft ground. This method is one of the soil improvement techniques for reinforcing and strengthening soft ground deposits. This thesis describes the investigation on the behavior of soft ground reinforced with SCP by low improvement ratio. Direct shear test and consolidation test carried out to verified behavior of composite ground reinforced with SCP. Test results were discussed with reference to the amount of consolidation settlement, variation of shear resistance with area replacement ratio and effect of the stress concentration. And, laboratory model loading test carried out to verified the effect of the location and failure mode of reinforced embankment. Residual shear strength varies with the area replacement and constrict load in the low replacement ratio. Calculated stress concentration ratio overestimate than proposed valve by experimental, theoretical and analytical method. As regards the location, improving right below of the top of the slope was more effective than below of the toe of the slope. This thesis carried out to obtain fundamental information of behavior of the composit ground. Hereafter, centrifuge test that reproduce stress state of the in-situ must be necessary through the further study about pile penetration, reinforce position and construct time.