• The Journal of Engineering Geology
• /
• 제15권2호
• /
• pp.105-121
• /
• 2005

Most of the landslides triggered by intensive rainfall on natural slope occur serious damages of human beings and properties. There have been many landslides since 1991 in Gyeonggi province. The influential factors are rainfall, topography, geology and soil properties. There were 660 landslides occurred by intensive rainfall as much as 250mm at Yongin and Anseong area from Tuly 19th to luly 21st,1991 This study surveyed location, topography, geology, geometry of the landslide and rainfall at the area and analyzed occurrence characteristics of the landslides. Most of the landslides occurred on the soil layer above the bed rock. They showed changes of landslide types from translational slides at the head part to flow at the central part. The landslides have relatively small magnitude of which length is shorter than 50m. In order to identify characteristics of landslides dependent on soil conditions, geotechnical properties of soil were evaluated by laboratory tests using soil samples which were collected on slided area and not-slided area. Soil properties of the slided area show high percentage of coarse material such as gravel and sand. However, soil of the not-slided area is mainly composed of fine material such as silt and clay. Permeability coefficients of the slided area are higher than those of the not-slided area.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.369-372
• /
• 2008

Recently, landslides have frequently occurred on natural slopes during periods of intense rainfall. With a rapidly increasing population on or near steep terrain in Korea, landslides have become one of the most significant natural hazards. Thus, it is necessary to protect people from landslides and to minimize the damage of houses, roads and other facilities. To accomplish this goal, many landslide prediction methods have been developed in the world. In this study, a simple landslide prediction system that enables people to escape the endangered area is introduced. The system is focused to debris flows which happen frequently during periods of intense rainfall. The system is based on the wireless sensor network (WSN) that is composed of sensor nodes, gateway, and server system. Sensor nodes comprising a sensing part and a communication part are developed to detect ground movement. Sensing part is designed to measure inclination angle and acceleration accurately, and communication part is deployed with Bluetooth (IEEE 802.15.1) module to transmit the data to the gateway. To verify the feasibility of this landslide prediction system, a series of experimental studies was performed at a small-scale earth slope equipped with an artificial rainfall dropping device. It is found that sensing nodes installed at slope can detect the ground motion when the slope starts to move. It is expected that the landslide prediction system by wireless senor network can provide early warnings when landslides such as debris flow occurs.

• Steel and Composite Structures
• /
• 제47권4호
• /
• pp.451-454
• /
• 2023

Landslides are one of the natural disasters that cause a lot of financial and human losses every year It will be all over the world. China, especially. The Mainland China can be divided into 12 zones, including 4 high susceptibility zones, 7 medium susceptibility zones and 1 low susceptibility zone, according to landslide proneness. Climate and physiography are always at risk of landslides. The purpose of this research is to prepare a landslide hazard map using the Hierarchical Analysis Process method. In the GIS environment, it is in a part of China watershed. In order to prepare a landslide hazard map, first with Field studies, a distribution map of landslides in the area and then a map of factors affecting landslides were prepared. In the next stage, the factors are prioritized using expert opinion and hierarchical analysis process and nine factors including height, slope, slope direction, geological units, land use, distance from Waterway, distance from the road, distance from the fault and rainfall map were selected as effective factors. Then Landslide risk zoning in the region was done using the hierarchical analysis process model. The results showed that the three factors of geological units, distance from the road and slope are the most important have had an effect on the occurrence of landslides in the region, while the two factors of fault and rainfall have the least effect The landslide occurred in the region.

• Journal of Korean Society of Forest Science
• /
• 제85권2호
• /
• pp.260-270
• /
• 1996

Structure and dynamics of Pinus densiflora community in Mt. Kaya were studied to provide the information needed for management of Pinus densiflora forest in the southern inland of Korea. Stratification structure of Pinus densiflora community in the lower and middle slope consisted of tree layer(10~15m), subtree layer(4~10m), shrub layer(1~4m), and herb layer(below 1m), while in the rock zone of ridge and top area consisted of tree layer(7~10m), subtree layer(2~7m), shrub layer(1~2m), and herb layer(below 1m). According to the diameter distribution of tree species in Pinus densiflora community, secondary Pinus densiflora forest will gradually decline. Its forest may be replaced by Quercus mongolica, Quercus serrata, Carpinus laxiflora, C. cordata, and Fraxinus rhychophylla in the lower slope, and by Quercus mongolica in the middle slope. Pinus densiflora forest has its seedlings and saplings in ridge and top area, so it may be sustained. By taking cores from Pinus densiflora trees in research area, it could be obtained that in the lower and middle slope, age of Pinus densiflora forest was about 80~90 years old. When the age of its trees was about 72~80 years old, withering trees of standing dead occurred. Disturbance regime of Pinus densiflora community in Mt. Kaya consisted of standing dead, uprooting and limbfall, these were 70.6%, 17.6% and 11.8% respectively. It takes about 100~110 years for advance growth of Pinus densiflora in ridge and top area to reach tree layer. During the period, it has twice chances of disturbance in standing dead. Annual diameter growth of Pinus densiflora was 2.45~2.9mm in the lower and middle slope, while it was 1.75mm in ridge and top region, by measuring cores.

• The Journal of Engineering Geology
• /
• 제25권1호
• /
• pp.115-129
• /
• 2015

The cut-slope of a large-sectional tunnel portal is recognized as a potential area of weakness due to unstable stress distribution and possible permanent displacement. This paper presents a case study of a slope failure and remediation for a large-scale cut-slope at a tunnel portal. Extensive rock-slope brittle failure occurred along discontinuities in the rock mass after 46 mm of rainfall, which caused instability of the upper part of the cut-slope. Based on a geological survey and face mapping, the reason for failure is believed to be the presence of thin clay fill in discontinuities in the weathered rock mass and consequent saturationinduced joint weakening. The granite-gneiss rock mass has a high content of alkali-feldspar, indicating a vulnerability to weathering. Immediately before the slope failure, a sharp increase in displacement rate was indicated by settlement-time histories, and this observation can contribute to the safety management criteria for slope stability. In this case study, emergency remediation was performed to prevent further hazard and to facilitate reconstruction, and counterweight fill and concrete filling of voids were successfully applied. For ultimate remediation, the grid anchor-blocks were used for slope stabilization, and additional rock bolts and grouting were applied inside the tunnel. Limit-equilibrium slope stability analysis and analyses of strereographic projections confirmed the instability of the original slope and the effectiveness of reinforcing methods. After the application of reinforcing measures, instrumental monitoring indicated that the slope and the tunnel remained stable. This case study is expected to serve as a valuable reference for similar engineering cases of large-sectional slope stability.

• The Journal of Engineering Geology
• /
• 제18권3호
• /
• pp.303-309
• /
• 2008

A probability of slope hazards was predicted at a natural terrain around the stone relics of Jinjeon-saji area, which is located in Yangyang, Kangwon Province. As the analyzing results of field investigation, laboratory test and geology and geomorphology data, the effect factors of landslides occurrence were evaluated. Also, the landslides prediction map was made up using the prediction model by the effect factors. The landslide susceptibility of stone relics was investigated as the grading classification of occurrence probability. In the landslides prediction map, the high probability area was $3,489m^2$ and it was 10.1% of total prediction area. The high probability area has over 70% of occurrence probability. If landslides are occurred at the predicted area, the three stories stone pagoda of Jinjeon-saji(National treasure No. 122) and the stone lantern of Jinjeon-saji(Treasure No.439) will be collapsed by debris flow.

• Ocean and Polar Research
• /
• 제24권4호
• /
• pp.429-442
• /
• 2002

The faunal assembalges of macrobenthos and their habitat conditions on the soft-bottoms around Dokdo(Dok Island) was investigated using a box corer and a van Veen grab in Sept. 1999 and May 2000. The sediments in the slope sites were composed of sand particles and those in Ullneung Basin were mud. The sediments in the shelf sites were in the range of fine to medium sand. The organic content of the slope sediments was in the range of 1 to 2%. The macrobenthos occurred at the slope sites represented by 15faunal groups belonging to 8 phyla, and the major faunal group was polychaetous annelids. They comprised ca. 80.6% in slope sites, and 84.8% in shelf sites. Dominant species in the slope were Exogone verugera(40.9%), Cossura longocirrata (8.4%), Tharyx sp. (6.6%), Scalibregma inflatum (4.9%), Aedicira sp. (4.7%), Aricidea ramosa (3.8%), and Sigambra tentaculata (3.7%). Dominant species in the shelf were Chone sp. (49.3%), Tharyx sp. (18.4%), Ophelina acuminata (6.7%), Chaetozone setosa (3.8%), Glycera sp. (2.6%), and Aedicira sp. (2.4%). The mean densities of macrobenthos in the slope and shelf area were $2,028\;ind./m^2$ and $456\;ind./m^2$, respectively. The trophic composition of benthic polychaete worms in the slope area was different from that in shallow shelf area: surface deposit feeding worms were most abundant in slope area whereas filter feeding worms in shelf area. According to the cluster analysis and MDS plots, the spatial distribution of macrobenthos in Dokdo slope region was related with the sediment properties such as particle size and organic content. In the case of vertical distribution of macrobenthos in slope sites, most faunas concentrated in the upper sediment layer within 2cm depth.

• The Journal of Engineering Geology
• /
• 제29권3호
• /
• pp.251-264
• /
• 2019

The displacement monitoring of unstable block at the rock slope located in the Cheonbuldong valley of Seoraksan National Park was carried out using Terrestrial LiDAR. The rock slopes around Guimyeonam and Oryeon waterfall where rockfall has occurred or is expected to occur are selected as the monitoring section. The displacement monitoring of unstable block at the rock slope in the selected area was performed 5 times for about 7 months using Terrestrial LiDAR. As a result of analyzing the displacement based on the Terrestrial LiDAR scanning, the error of displacement was highly influenced by the interpolation of the obstruction section and the difference of plants growth. To minimize the external influences causing the error, the displacement of unstable block should be detected at the real scanning point. As the result of analyzing the displacement of unstable rock at the rock slope using the Terrestrial LiDAR data, the amount of displacement was very small. Because the amount of displacement was less than the range of error, it was difficult to judge the actual displacement occurred. Meanwhile, it is important to select a section without vegetation to monitor the precise displacement of unstable rock at the rock slope using Terrestrial LiDAR. Also, the PointCloud removal and the mesh model analysis in a vegetation section were the most important work to secure reliability of data.

• The Journal of Engineering Geology
• /
• 제17권2호
• /
• pp.205-215
• /
• 2007

In this study, the soil characteristics are analyzed using the result of various soil tests as an object of the soil layer of natural slopes in landslides areas. Also, the relationship with landslides and interrelation with each soil properties are analyzed. The landslides in three areas with different geological condition are occurred due to heavy rainfall in same time. The geology of Jangheung area, Sangju area and Pohang area is gneiss, granite, and the tertiary sedimentary rock, respectively. However soil characteristics have a little differentiation to geological condition, the soils sampled from landslide area have higher proportion of fine particle and porosity, and lower density than those from non landslide area. In case of same geological condition, landslides are occurred in the terrain slope with high permeability. The permeability is mainly influenced by the soil characteristics such as particle size distribution, porosity, particle structure, and the geological origins such as weathering, sedimentary environment. The soil layer with high internal friction angle is more stable than that with low internal friction angle in all geological condition. The permeability is mainly influenced by effective particle size, coefficient of uniformity, coefficient of gradation, porosity, density and so on. Also, those have interrelation with each factor. These interrelations are similar in all study area. Meanwhile, in proportion as the void ratio and the porosity rises the permeability increases.

• Korean Journal of Plant Resources
• /
• 제26권5호
• /
• pp.589-596
• /
• 2013

Vaccinium bracteatum Thunb. is an evergreen plant that belongs to the Genus Vaccinium distributed in Korea, and its fruit has been used for food by the common people and thus has a high possibility of commercialization. Therefore, the habitat environment and individual characteristics of V. bracteatum in Jeju Island were investigated to obtain the basic data for commercialization and preservation. The results showed that V. bracteatum is mostly distributed on the southern slope of Mt. Halla at an altitude of 100 to 500 m. V. bracteatum that occurred in the quadrat were total 30 individuals, which had an average height of 6.0 m, an average DBH of 7.8 cm, and an average number of trunk of 4.3. As for the community structure of the habitat, the average percentage of vegetation cover for the tree layer was 36%, while that for the subtree layer was 78%, which emphasized the importance of the subtree layer. The total number of species that occurred in the quadrat was 76. For the tree layer, total 10 species occurred, which include 2 species of evergreen coniferous trees, 3 species of evergreen broad-leaved trees, and 5 species of deciduous broad-leaved trees. For the subtree layer, total 24 species occurred, which include 1 species of evergreen coniferous tree, 11 species of evergreen broad-leaved trees, and 10 species of deciduous broad-leaved trees. Among these, Eurya japonica Thunb. was the species with a high relative contribution, which threatened V. bracteatum For the shrub layer, 27 species occurred including Cinnamomum japonicum Siebold, and for the herbaceous layer, 64 species occurred including Ardisia crenata Sims. The similarity between the habitats of V. bracteatum was very low, and it did not prefer a characteristic community. The V. bracteatum community around Shinrei stream was distributed on the surrounding area adjacent to the slope of the stream rather than the slope. There were a lot of basins, but the branches, which did not receive sunlight, had withered. It is thought that V. bracteatum would decline if the forest formation continues.