• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.571-584
• /
• 2017

Slope mass rating (SMR) is commonly used for the geomechanical classification of rock masses in an attempt to evaluate the stability of slopes. SMR is calculated from the $RMR_{89-basic}$ (basic rock mass rating) and from the characteristic features of discontinuities, and may be applied to slope stability analysis as well as to slope support recommendations. This study attempts to utilize the SMR classification system for slope stability analysis and to investigate the engineering geological conditions of the slopes and the slope stability analysis of the Gas Flare site in phases 6, 7 and 8 of the South Pars Gas Complex in Assalouyeh, south of Iran. After studying a total of twelve slopes, the results of the SMR classification system indicated that three slope failure modes, namely, wedge, plane and mass failure were possible along the slopes. In addition, the stability analyses conducted by a number of computer programs indicated that three of the slopes were stable, three of the slopes were unstable and the remaining six slopes were categorized as 'needs attention'classes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 사면안정 학술발표회 논문집
• /
• pp.51-60
• /
• 1997

• 터널과지하공간
• /
• 제4권3호
• /
• pp.215-227
• /
• 1994

Rock Mass classifications have been developed in many European countries. The most widely used classification methods are the Rock Mass Rating (RMR) system proposed by Bieniawski(1973) and the Q-system developed By Barton et al. (1974). These methods are also adopted at many mountain tunnels and subway sites in our country. Here, a geomechanical classification for slopeds in rock, the "Slope Mass Rating"(SMR) is presented for the preliminary assessment of slope stabiliyt. This method can be applied to excavation and support design in the front part of tunnel and cutting area as a guide line and recommendation on support methods which allow a systemmetic use of geomechanical classification for rock slopes.

• 터널과지하공간
• /
• 제5권4호
• /
• pp.308-317
• /
• 1995

The stability study on the rock slope where have produced failures in Boryung dam site was evaluated using the streonet analysis techniques. SMR(Slope Mass Rating) approach which is suitable for preliminary assessment of slope stability in rock was also carried out for rating rock mass. The 3-4 major discontinuity sets are distributed and all type of failure(plane, wedge and toppling failure) are presented in this slope face. The dip of slope must be lowered to friction angle(26degree), otherwise the possibility of plane and toppling faiue will always exist in this slope.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.535-542
• /
• 2000

The investigated cut-slope is located in Odong-Ri, Hoebuk-Myun, Boeun-Gun and composed of quartzite and phyllitic rocks (approximately 80 meters in length and 25 meters in height). During the investigation, the groundwater which was inferred to the natural pipe of slope was continuously flowing in the upper part of slope. The investigation for discontinuity properties in this area was carried out to decide the rock mass rating and strength parameters. To analyze the stability of cut-slope, lower equal-area hemisphere projection method was used. And laboratory test was done to evaluate engineering properties of soil which was sampled in the non-failure and failure area The inferred causes of cut-slope failure are the geometric relationship between the orientation of cut-slope and geological structures such as joints, faults which is distributed in the slope. And direct cause of failure is the increase of water content due to the heavy rainfall.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2001년도 추계공동학술발표회 논문집
• /
• pp.99-112
• /
• 2001

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.177-184
• /
• 1999

In general tile evaluation process of rock slope stability is an ambiguous system which is made up of ideas subjected to practical experience of an expert. This paper aims to propose more effective methods that helps engineers to evaluate the stability of rock slope by using RMR(Rock Mass Rating for the Geomechanics Classification) and Stereo-graphic Projection and Fuzzy Approximate Reasoning Concept. the result of this paper is that a rational evaluation of rock slope stability and countermeasures can be achieved thorough RMR. and Stereo-graphic Projection and Fuzzy Approximate Reasoning Concept.

• 터널과지하공간
• /
• 제29권5호
• /
• pp.305-317
• /
• 2019

노출 암반과 시추 코어를 특성화하고, 터널, 공동 및 광산 갱도에서 지보 및 보강 대책을 추정하기 위해 RMR 및 Q 분류법이 기술자들에 의해 널리 사용되어왔다. 사면에서의 암반분류는 SMR이 많이 사용되었지만 Q-Slope가 2015년부터 사면에 도입되었다. 지난 10년간, Q-slope라 불리는 수정된 Q시스템이 노천광산의 벤치, 도로사면 사면에 적용하기 위해 많은 저자들에 의해 시험되었다. 이 시험들을 통하여 Q-slope 값과 장기 안정 및 무지보 사면 경사각 사이에 간단한 상관관계가 있음이 나타내어 왔다. 터널이나 지하공간에서 RMR과 Q를 병용하면서 비교를 통해 상호보완 해왔던 것과 마찬가지로 사면에서도 SMR과 병행하여 Q-Slope를 사용할 수 있을 것이다. 국내에서 발표사례가 없는 Q-Slope의 사용방법과 인도네시아 Pasir 노천석탄광의 적용 예를 소개하고자 한다.

• Geomechanics and Engineering
• /
• 제35권5호
• /
• pp.539-554
• /
• 2023

This article is dedicated to the pursuit of establishing a robust empirical relationship that allows for the estimation of in-situ modulus of deformations (E_m and G_m) within sedimentary rock slope masses through the utilization of Q_slope values. To achieve this significant objective, an expansive and thorough methodology is employed, encompassing a comprehensive field survey, meticulous sample collection, and rigorous laboratory testing. The study sources a total of 26 specimens from five distinct locations within the South Pars (known as Assalouyeh) region, ensuring a representative dataset for robust correlations. The results of this extensive analysis reveal compelling empirical connections between E_m, geomechanical characteristics of the rock mass, and the calculated Q_slope values. Specifically, these relationships are expressed as follows: E_m = 2.859 Q_slope + 4.628 (R² = 0.554), and G_m = 1.856 Q_slope + 3.008 (R² = 0.524). Moreover, the study unravels intriguing insights into the interplay between in-situ deformation moduli and the widely utilized Rock Mass Rating (RMR) computations, leading to the formulation of equations that facilitate predictions: RMR = 18.12 E_m0.460 (R² = 0.798) and RMR = 22.09 G_m0.460 (R² = 0.766). Beyond these correlations, the study delves into the intricate relationship between RMR and Rock Quality Designation (RQD) with Qslope values. The findings elucidate the following relationships: RMR = 34.05e^0.33Qslope (R² = 0.712) and RQD = 31.42e^0.549Qslope (R² = 0.902). Furthermore, leveraging the insights garnered from this comprehensive analysis, the study offers an empirically derived support system tailored to the distinct characteristics of discontinuous rock slopes, grounded firmly within the framework of the Q_slope methodology. This holistic approach contributes significantly to advancing the understanding of sedimentary rock slope stability and provides valuable tools for informed engineering decisions.

• 한국지반공학회논문집
• /
• 제18권2호
• /
• pp.23-37
• /
• 2002

절취 사면에서의 파괴는 사면의 내부 또는 외부 요인들의 결합에 의해 발생한다. 내부 요인은 사면 자체의 지질 또는 형상 조건과 관련된 파괴 요인이며, 외부 요인은 자연적 또는 인위적으로 사면에 가해지는 파괴 요인이다. 각 요인에 의한 사면 파괴에 기치는 영향의 정도는 사면을 구성하는 지반 조건에 따라 다르며, 사면의 거동 특성에 의해 제어된다. 이 연구에서는 사면의 지반 조건을 거동 특성에 따라 구분하는 기준으로 토층심도율(SR), 블록크기비(BR) 및 암석강도를 사용하였다. 이런 기준에 의하면 사면의 지반 조건은 불연속체적 절리 암반과 연속체적 토상 지반, 파쇄 암반, 괴상 암반으로 구분된다. SFi-system은 이와 같이 구분된 지반 조건에 따라 내부 파괴 요인과 외부 파괴 요인을 평가함으로써 사면 파괴 지수(SFi)를 결정하는 평가 시스템이다. 이 평가 시스템을 실제적으로 사면에 적용한 결과, 사면 파괴 지수는 사면 파괴의 가능성 및 규모와 밀접한 관련이 있음을 보여준다. 따라서 SFi-system은 사면의 파괴 예측과 그 특성 분석을 위한 효과적인 도구로 사용될 수 있다.