• 자원환경지질
• /
• 제2권4호
• /
• pp.73-90
• /
• 1969

The area studied is a southwestern part of Okcheon geosynclinal zone which streches diagonally across the Korean peninsula in the mid-central parts of South Korea, and is bounded by Charyeong mountain chains in the north and by Sobaek mountain chains in the south. The general trend of the zone is of NE-SW direction known as Sinian direction. Okcheon system of pre-Cambrian age occupies southwestern portion of Okcheon geosynclinal zone, and Choseon and Pyeongan systems of Cambrian to Triassic age in northeastern portion of the zone. It was defined by the writer that the former was called "Okcheon Paleogeosynclinal zone" and the latter "Okcheon Neogeosynclinal zone," although T. Kobayashi named them "Metamorphosed Okcheon zone" and "Non-metamorphosed Okcheon zone" respectively and thought that sedimentary formations in both zones were same in origin and of Paleozonic age, and C.M. Son also described that Okchon system was of post-Choseon (Ordovician) and pre-Kyeongsang (Cretaceous) in age. According to the present study two zones are separated by great fault so that the geology in both zones is not only entirely different in origin and age, but also their geolosical structures are discontinuous. Stratigraphy and structure of Okcheon system are clearly established and defined by the writer and its age is definitely pre-Cambrian. It is clarified by present study that the meta-sediments in and at vicinity of Charyeong mountain chains are correlated to Weonnam series of pre-Cambrian age which occupies and continues from northeast to southwest in and at south of Sobaek mountain chains, and both metasediments constitute basement of Okcheon system. Pyeongan, Daedong and Kyeongsang systems were deposited in few narrow intermontain basins in Okcheon paleogeosynclinal zone after it was emerged at the end of Carboniferous period. Granites of Jurassic and Cretaceous ages and volcanics of Cretaceous age are cropped out in the zone. Jurassic granite is aligned generally with the trend of Okcheon geosynclinal zone, whereas Cretaceous granite lacks of trend in distribution. Many isoclinal folds and thrust faults caused by Taebo orogeny at the end of Jurassic period are also parallel with Sinian directieon and dip steeply to northwest. Charyeong, Noryeong, Sobaek, and Deogyu mountain chains are located in areas of anticlinorium, and Kyongsang system in narrow synclinal zones. Folds in Okcheon neogeosynclinal zone are generally of N 70-80W direction but deviate to Sinian direction at the western parts of the zone. This phenomena is interpreted by the fact that the folds were originated by Songrim disturbance at the end of Triassic period and later partly modified by Taebo orogeny. Thrust faults of Taebo orogeny coentinue from Okcheon paleogeosynclinal zone into neogeosynclinal zone, forming imbricated structure as previously described. Strike-slip faults perpendicular to Sinian direction and shear faults diagonally across it by 55 degrees also prevail in neogeosynclinal zone. It is concluded from viewpoints on geology and geological structure that l)Okchon geosyncline had changed its location and affected by numerous disturbances through geologic time, and 2)mountain chains in the area such as Charyeong, Noryeong, Sobaek, and Deogyu were originated as folded mountains. Differing from others, however, Sobaek range was probably formed at the time of Songrim disturbance and modified later by Taebo orogeny. It is cut by Danyang-Jeomchon fault at the vicinity of Joryeong near Munkyeong village and does not continue to southwest beyond the fault, whereas southwestern portion of erstwhile Sobaek range continues to Taebaek rangd northeastward from Deogyusan passing through Sangju, Yecheon, and Andong. From these evidences, the writer has newly defined the erstwhile Sobaek range in such a way that Sobaek range is restricted only to northeastern portion and Deogyu range is named for the southwestern portion of previous Bobaek range.

• 암석학회지
• /
• 제23권1호
• /
• pp.1-15
• /
• 2014

한반도 남서단부의 영암광화대에는 상은과 은적 그리고 바람재 광산이 발달하고 있다. 이 지역은 목포-해남-영암 지역에 걸쳐 확인되는 대규모 화산성 환상구조의 북동부에 해당한다. 조사지역인 상은-은적-바람재 지역에서 확인된 13개소의 석영맥과 광화대는 유문암질 용결응회암을 모암으로 하고 있으며, 주로 남-북 내지는 북북서 방향의 주향에 서측으로 고각도를 이루고 있다. 상은, 은적, 바람재 지역에 발달하는 석영맥은 단일맥인 경우도 있으나, 주로 폭 1-5 cm의 맥들로 다발을 이루는 특징을 보인다. 석영맥과 평행하게 발달하는 단층면의 발달로 보아 석영맥의 관입과 광화작용의 전후에 단층운동이 존재했음을 지시한다. 또한 이들 석영맥과 광화대는 광화작용 후기에 작용한 북서 방향의 좌향이동 단층에 의해 변위된 양상을 보인다. 북서 방향의 단층은 불치와 상은광산 부근에서 잘 관찰되며, 장동리와 장천리 일대의 석영맥의 분포나 선상구조에 의해서도 이 단층과 평행한 단층들이 발달할 것으로 판단된다. 조사지역의 서측인 상은적산 남측에서 서측으로 북서 주향의 석영맥이 관찰된다. 은적-상은 광상 주변에서 확인된 12개 석영맥의 현장조사 및 금, 은 품위의 분석 결과에 의하면, 남측으로 가면서 석영맥의 발달 양상이 미약해 지고 있다. 바람재 부근 광상의 경우 북북서-남남동 방향의 석영맥이 약 20 m 연장되고 있다. 섬아연석, 방연석 등 유화광물은 함유하고 있으나 금-은의 발달은 미약하다. 금품위가 평균 <0.1 g/t, 은품위가 평균 5.7 g/t으로 은적광산(금; 12.3 g/t, 은; 1,380.0 g/t)과 상은광산(금; 2.7 g/t, 은; 23.5 g/t)에 비해 남측으로 가면서 금, 은의 품위는 현저히 떨어지는 반면, 그 외 연, 아연 등 유화광물 함량은 증가하는 양상을 보인다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1105-1109
• /
• 1995

A CCD-camera, which is structured with vision system, was used to realize automatic seam-tracking system and 3-D information which is needed to generate torch path, was obtained by using laser-slip beam. To extract laser strip and obtain welding-specific point, Adaptive Hough-transformation was used. Although the basic Hough transformation takes too much time to process image on line, it has a tendency to be robust to the noises as like spatter. For that reson, it was complemented with Adaptive Hough transformation to have an on-line processing ability for scanning a welding-specific point. the dead zone,where the sensing of weld line is impossible, is eliminated by rotating the camera with its rotating axis centered at welding torch. The camera angle is controlled so as to get the minimum image data for the sensing of weld line, hence the image processing time is reduced. The fuzzy controller is adapted to control the camera angle.

• Geomechanics and Engineering
• /
• 제8권1호
• /
• pp.33-52
• /
• 2015

Based on the Mohr-Coulomb failure criterion, a gradient-dependent plastic model that considers the strain-softening behavior is presented in this study. Both triaxial shear tests on conventional specimen and precut-specimen, which were obtained from an ancient landslide, are performed to plot the post-peak stress-strain entire-process curves. According to the test results of the soil strength, which reduces from peak to residual strength, the Mohr-Coulomb criterion that considers strain-softening under gradient plastic theory is deduced, where strength reduction depends on the hardening parameter and the Laplacian thereof. The validity of the model is evaluated by the simulation of the results of triaxial shear test, and the computed and measured curves are consistent and independent of the adopted mesh. Finally, a progressive failure of the ancient landslide, which was triggered by slide of the toe, is simulated using this model, and the effects of the strain-softening process on the landslide stability are discussed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.9-10
• /
• 2012

AFD(Active Frequency Drift), SMS(Slip-Mode frequency Shift)를 비롯한 주파수 이동 단독 운전 검출 방법은 단독 운전 발생 후, 계통의 주파수를 정상 운전 범위 밖으로 이동시켜 OUF(Over/Under Frequency) 릴레이를 동작하게 만들어 단독 운전을 검출한다. 이 방법들의 불검출 영역은 알고리즘에 의한 전류 위상각 변화율과 부하 역률 각 변화율 사이의 관계, 그리고 단독 운전 후 정상 상태(steady state) 운전 주파수에 의해 결정된다. 본 논문에서는 불검출 영역에 영향을 미치는 부하 역률 각 변화율을 분석하고 그를 바탕으로, 설계한 Q(Quality)-factor보다 낮은 Q-factor를 갖는 부하 조건에서는 항상 단독 운전을 검출할 수 있는 설계 방법을 제시한다. 제안된 방법의 유효성은 모의실험 및 실험으로 검증되었다.

• 대한전기학회논문지
• /
• 제36권3호
• /
• pp.153-162
• /
• 1987

The purpose of this paper is to analysis and develop theoretically the characteristics of tubular linear induction motor, which is a special industrial motor that generates directly thrust force from electrical power. The Poisson equation about vector potential which is created by the application of Maxwell electromagnetic equation with the speed considered, results in modified Bessel equation by the assumption that is applied to each region of the experimental motor. Vector potential, magnetic flux density, secondary current, and thrust force according to its region respectively were found out by substituting boundary condition for this equation and rearranging. Besides, a attendant materials, that is, thermal characteristic, which is one of the characteristics under the operation of experimental motor each part's magnetic flux distribution characteristics within active zone, the required time for reciprocating motion, and variation of power factor vs. a slip were found.

• 산업기술연구
• /
• 제26권A호
• /
• pp.69-73
• /
• 2006

Mach peening treatment is one of the various kinds of techniques to improve the fatigue properties. The mach peening process gives high-level work hardening and compressive residual stress near the surface layer, improving the fatigue strength. In addition, this treatment reduces slip bands that initiate the fatigue cracks near the surface. During impingement, a plastic indentation surrounded by a plastic zone is formed. Mach peening treatment characteristic is less energy consumption and is an environmental friendly processing methods that is not accompanied by pollution. It is machining process that can prevent fatigue fracture beforehand in structure using already as well as process of production. The test results showed that fatigue crack propagation delay appeared by drilling type 43%, mach peening type 110%.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.49-56
• /
• 1997

Most large strike-slip faults do not rupture their entire length during single faulting but generally break in segments which are different in location and time of faulting. Studies related to the development of the Yangsan fault have been reported based on partial results from characteristics of geolgocial distribution, geophysical prospecting and paleostress analyses. This paper shows, based on preliminary results, that the Yangsan fault could be divided into four structural areas along entire length. These areas are different in geological distribution, bedding attitude measured from sedimentary rocks, strike of main fault, geometry of small faults, termination types of fault tips, cyclic variation of fault zone width, and arrangement of paleostress. Therefore, the Yangsan fault could be divided into at least four segments.

• Geomechanics and Engineering
• /
• 제30권4호
• /
• pp.353-362
• /
• 2022

The seismic failure-prone region in Istanbul has been examined in terms of the segmented pipelines. Although some researchers have suggested that this territory should be left as a green land, many people continue to live in this area. This region is about 9-10 km away from the North Anatolian Fault Line. This fault zone is an active right-lateral strike-slip fault line in Turkey and an earthquake with a magnitude of 7.0-7.5 is expected in the Marmara Sea. Therefore, superstructures and infrastructures are under both land sliding risks and seismic risks in this area. Because there are not any pipeline-fault line intersection points in the region, in this study, it has been focused on the behaviors of the segmented (sewage or stormwater) pipelines subject to earthquake-induced permanent ground deformation and seismic wave propagation. Based on the elastic beam theory some necessary analyses have been carried out and obtained results of this approximation have been examined.

• 대한토목학회논문집
• /
• 제38권6호
• /
• pp.895-906
• /
• 2018

우리나라의 어린이보호구역 개선사업은 어린이가 주로 활동하는 유치원, 초등학교 주변에서 많이 발생하고 있어 어린이 교통사고 예방책의 일환으로 추진하고 있다. 하지만 어린이보호구역내 안전시설물에 대한 필수 설치 시설물과 적정 설치 수준에 대한 연구가 부족한 바, 본 연구에서는 자료포락분석을 활용한 안전시설물 설치의 효율성을 상대적으로 평가하여 개선방안을 제시하였다. 화성시 관내 초등학교중 총 28개 어린이보호구역에 대한 시설물 현황과 사고현황 자료를 구축하였다. 기존 연구상에 효과가 입증된 주요 시설물 6개(고원식 교차로, 고원식 횡단보도, 방호울타리, 미끄럼방지시설, 과속방지턱, 단속카메라)만 투입요소로 하여 분석하였다. 분석결과 28개소 중 12개소만 효율성이 있는 것으로 나타났으며, 16개소는 효율성이 떨어지는 것으로 나타났다. 효율집단으로 구분된 어린이보호구역은 방호울타리, 미끄럼방지시설, 단속카메라 설치가 비효율집단으로 구분된 어린이보호구역보다 적게 설치한 것으로 나타났다. 방호울타리는 어린이보호구역 전체연장 중 47% 정도만 설치하여도 충분히 효율성이 있는 것으로 나타났으며, 미끄럼방지시설의 개소 수는 $km^2$당 8.7개 정도면 효율성이 있는 것으로 나타났다. 비교대상의 수가 28개소로 상대적 효율성 평가지표로 활용하는 데는 본 연구가 한계가 있으며, 향후 전국단위로 그룹화 하여 각 그룹별로 효율성 평가할 수 있을 것으로 판단된다.