• 한국철도학회논문집
• /
• 제10권1호
• /
• pp.51-56
• /
• 2007

In this paper, control schemes are developed for a propulsion system(Converter/Inverter) in electrical train. A robust controller for PWM converter is proposed. The converter controller consists of a PI controller for DC output voltage and a current controller using error-space approach for maintaining the sinusoidal current waveform and unity power factor. This proposed method is based on characteristic ratio assignment(CRA) method which has the advantage to design the optimal gain to meet the referenced response and overshoot within the limit range. Inverter system is controlled by vector control and slip frequency control. At low speed region, vector control scheme is applied to control instantaneous torque and slip frequency control is performed under overmodulation region and one pulse mode. Because output voltage of converter contains harmonics ripple at twice input ac line frequency, control scheme is developed to reduce the pulsating torque current. The performance of propulsion system will be verified by simulation and prototype experimental results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.545-548
• /
• 2006

This study includes the experimental investigation on the fatigue-bond behavior with respect to the various rates of steel corrosion. Major criteria of test variables are the rates of steel corrosion by chloride ion and the ratio of the applied stress to the bond failure stress. According to the test results, the slip versus number of load cycles relation was found to be approximately linear in double logarithmic scale, not only without steel corrosion but also with steel corrosion. This research will be helpful for the realistic durability design and condition assessment of reinforced concrete structures.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.122-128
• /
• 2010

To meet the NOx limit without a penalty of fuel consumption, urea-SCR system is currently regarded as promising NOx reduction technology for diesel engines. SCR system has to achieve maximal NOx conversion in combination with minimal $NH_3$ slip. In this study, the performance characteristics of urea-SCR system with open loop control were assessed in the European Transient Cycle(ETC) for heavy duty diesel engine. The SCR inlet temperaure varied in the range of 200 to $340^{\circ}C$ in the ETC cycle. Open loop control calculated the urea flow rate based on the NOx and NSR map which gave for each combination of SCR inlet temperature and space velocity the normalized $NH_3$ to NOx stoichiometric ratio which resulted in a steady-state $NH_3$ slip of 20ppm. During the ETC cycle, the open loop control with the optimized NSR offset achieved NOx reduction of 80% while keeping the average $NH_3$ slip below 10ppm and maximum 20ppm. It was also found that NOx sensor was cross-sensitive to $NH_3$ and a control strategy for cross-sensitivity compensation was required in order to use a NOx sensor as feedback device.

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.922-930
• /
• 2008

질소산화물($NO_x$) 저감을 위한 선택적 무촉매 환원(SNCR; selective non-catalytic reduction) 공정의 성능은 유속, 반응온도 그리고 반응물간의 혼합과 같은 공정변수에 민감하다. 따라서 효율적인 SNCR 공정의 설계와 운전을 위하여 속도장, 온도장, 및 화학물질들의 농도 분포에 대한 이해가 필수적이다. 본 연구에서는 150 kW LPG 버너가 장착되고, 요소용액을 환원제로 사용하는 파일럿 규모 SNCR 공정에 대하여 액적모델과 결합된 2차원 난류반응흐름 전산유체역학(CFD; computational fluid dynamics) 모델을 개발하고, 이 모델은 실험결과를 통하여 검증된다. 난류반응 CFD 모델에서는 $NO_x$저감율과 $NH_3$-slip을 예측하기 위하여 7개 반응식으로 이루어진 요소용액과 $NO_x$와의 반응기작을 이용한다. 이러한 모델을 이용한 CFD 모사결과는 온도와 NSR(normalized stoichiometric ratio)에 따른 $NO_x$ 저감율에서 실험결과와 최대 20% 이내에서 차이를 보여주고 있으며, $NH_3$-slip에 대하여는 실험결과와 모사결과 사이에 유사한 경향성을 얻었다.

• 대한토목학회논문집
• /
• 제28권4A호
• /
• pp.537-548
• /
• 2008

최근 들어 비부착 강선을 이용한 프리스트레스트 콘크리트 구조물의 건설이 증가하고 있다. 그러나 극한거동 해석 시 단면 적합조건을 이용하는 내부 부착 강선과는 다르게 비부착 강선은 부재의 전체거동에 의해서 응력 증가량이 결정된다. 또한 외부 강선의 경우에는 편향부에서의 미끌림 효과와 강선의 편심 변화 효과 등이 발생하게 된다. 따라서 본 연구는 비부착 강선을 가지는 프리스트레스트 콘크리트(PSC) 보의 거동 특성을 평가하고 비부착 강선의 극한 응력을 구하기 위하여 지간길이/유효깊이, 콘크리트 압축강도, 철근비 및 기존 부착강선의 영향 등을 변수로 하여 정적 휨실험을 수행하여 비부착 강선 부재의 휨거동 특성을 얻었다. 실험결과에 의하면 균열하중, 철근 항복 하중 및 파괴하중의 경우, 콘크리트 강도보다는 철근비의 영향이 더 크게 나타났으며, 강도 측면에서는 고강도의 경우가 저강도의 경우보다 약간은 구조 성능이 우수하나, 큰 차이는 없는 것으로 나타났다. 또한 L/dp 값이 커질수록 훨씬 더 긴 구간의 연성 거동이 있는 것으로 나타났다. 이는 철근 항복 이후 비부착 강선의 기여가 상당히 크다는 것을 알 수 있었으며, ACI-318에서 제시하고 있는 비부착 강선의 극한 응력식은 실험 결과와 잘 일치하지 않으며, 경향성도 없는 것으로 나타났다. 실험결과 들을 분석하여 미끌림 현상이 없는 비부착 강선의 극한응력에 대한 예측식을 제안하였다. 제안된 예측식은 실험결과와 비교적 잘 일치하는 것으로 나타났으며, 미끌림 현상이 없는 비부착 강선의 극한 휨거동 평가, PSC 부재 해석 및 설계 시 본 연구에서 제안된 식은 유용한 기초가 될 것으로 사료된다.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.134-141
• /
• 2005

Semi-Spherical Continuously Variable Transmission(SS-CVT) is the CVT which transmits power by rolling friction between dry metals, and its outstanding advantage is the ability of realizations of neutral, forward and reverse states without relying on any other devices. A spherical shaped variator transmits power and also changes gear ratio where keeping contact with a output disk. The frictional direction to transmit power and the other direction to change gear ratio are perpendicular to each other, so we can describe that two dimensional rolling friction is occurred in the contact point between the variator and the disk. Since magnitudes or relations of the two forces are completely unknown, they were analyzed by the experiments in this study. We determined the variables related with the friction phenomena by the dimensional analysis, and manufactured the SS-CVT test bench which could measure the related variables. Finally, the empirical formula for evaluating the two friction forces was proposed based on the experimental results.

• 한국지진공학회논문집
• /
• 제10권3호
• /
• pp.113-123
• /
• 2006

콘크리트 부재의 내진설계에 있어 강도와 더불어 변형 능력은 중요한 요소이다. 연결보는 전단 지배 부재임에도 항복 이후 소성 변형을 요구하는 부재인데 본 연구에서는 연결보의 변형 능력에 대한 실험을 통해 변형 모형을 제시하였다. 일반적인 배근 형태를 가진 철근 콘크리트 연결보를 대상으로 단조하중실험을 수행하였다. 경간-깊이비, 휨 철근비, 전단 철근비를 변수로 하여 연결보의 거동을 평가하였다. 전단 지배 부재인 연결보는 아치작용과 트러스 작용으로 전단력에 대해 저항하는데 실험 결과를 통해 전단력을 두 작용의 구분과 항복 강도 발현 이후 소성 변형에 따른 두 작용의 구성비 변화에 대해 분석하였다. 실험결과에 기초한 전단 철근과 휨 철근의 변형률 분포 모형을 이용하여 휨 철근의 응력 상태를 산정하였다. 휨 철근의 부착-미끄러짐에 의해 결정되는 균열폭을 고려하는 연결보의 변형 모형을 제시하였다. 항복 상태는 휨 철근의 항복 시점으로 정의하였고, 극한 상태는 변형 증가에 따른 스트럿의 압축 강도 저하에 의해 결정되었다. 이 변형 모형은 변위기초설계에 활용될 수 있을 것으로 기대된다.

• Steel and Composite Structures
• /
• 제49권4호
• /
• pp.381-392
• /
• 2023

This study experimentally investigates the flexural behavior of steel-UHPC composite slabs composed of an innovative negative Poisson's ratio (NPR) steel plate and Ultra High Performance Concrete (UHPC) slab connected via demountable high-strength bolt shear connectors. Eight demountable composite slab specimens were fabricated and tested under traditional four-point bending method. The effects of loading histories (positive and negative bending moment), types of steel plate (NPR steel plate and Q355 steel plate) and spacings of high-strength bolts (150 mm, 200 mm and 250 mm) on the flexural behavior of demountable composite slab, including failure mode, load-deflection curve, interface relative slip, crack width and sectional strain distribution, were evaluated. The results revealed that under positive bending moment, the failure mode of composite slabs employing NPR steel plate was distinct from that with Q355 steel plate, which exhibited that part of high-strength bolts was cut off, part of pre-embedded padded extension nuts was pulled out, and UHPC collapsed due to instantaneous instability and etc. Besides, under the same spacing of high-strength bolts, NPR steel plate availably delayed and restrained the relative slip between steel plate and UHPC plate, thus significantly enhanced the cooperative deformation capacity, flexural stiffness and load capacity for composite slabs further. While under negative bending moment, NPR steel plate effectively improved the flexural capacity and deformation characteristics of composite slabs, but it has no obvious effect on the initial flexural stiffness of composite slabs. Meanwhile, the excellent crack-width control ability for UHPC endowed composite members with better durability. Furthermore, according to the sectional strain distribution analysis, due to the negative Poisson's ratio effect and high yield strength of NPR steel plate, the tensile strain between NPR steel plate and UHPC layer held strain compatibility during the whole loading process, and the magnitude of upward movement for sectional plastic neutral axis could be ignored with the increase of positive bending moment.

• 한국세라믹학회지
• /
• 제27권1호
• /
• pp.91-101
• /
• 1990

The green microstructure and sintering behavior of ZrO2 were analyzed in terms of kinetic stability (measured by the stability ratio ; W) and interfacial characteristics of colloidal suspension. Green density and the most frequent pore radius(MFPR) of green body were directly correlated with the stability ratio. These observations were explained using a concept of the critical stability ratio(Wc) and the potential energy of two interacting particles in colloidal suspension. Analysis of the data also indicates that the potential energy barrier between two interacting colloid particles should be higher than its critical value for a fabrication of ZrO2 green body with dense and uniform microstructure. Besides, we have successfully applied a concept of the donoracceptor interaction to increase the kinetic stability of ZrO2 slip and density of green body.

• 한국해양공학회지
• /
• 제5권2호
• /
• pp.58-66
• /
• 1991

Not only difference of fatigue crack growth and propagation behavior resulted from the grain size, the hardness ratio and volume fraction in M.E.F. dual phase steel composed of martensite in hard phase and ferrite in soft phase, but also the effects of the plastic constraint were investigated by fracture mechanics and microstructural method. The main results obtained are as follows: 1) The fatigue endurance of M.E.F. steel increases with decreasing the grain size, increasing the ratio of hardness and volume fraction. 2) The initiation of slip and crack occures faster as the stress level goes higher. These phenomena result from the plastic constraint effect of the second phase. 3) The crack propagation rate in the constant stress level is faster as the grain size gets larger, the ratio of hardness lower and volume fraction smaller.