• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.562-577
• /
• 2020

In this study, to conserve the clay seated Vairocana Buddha triad in Seonunsa temple, Gochang (Treasure 1752), the primary materials employed for creating the clay Buddha statues were scientifically analyzed. By analyzing the soil layer constituting the Buddha statues, it is observed that the said layer comprises sand having particle size greater than that of medium sand and soil having particle size smaller than that of fine sand, which were used in a ratio of 7:3, along with the bast fibers of paper mulberry (Broussonetia kazinoki). Hence, the aforementioned soil layer is composed of a mixture of sand and weathered soil, along with bast fibers to prevent scattering. By analyzing the tree species, it is found that the wooden materials constituting the bottom board and the interior of Buddha's sleeves of the Amitabha Buddha statue, Vairocana Buddha statue, and Medicine Buddha statue are hard pines (Pinus spp.). Additionally, three layers are found in the cross section of the gold layer. Furthermore, each of the hair sections of the Buddha statues is composed of earthy materials such as quartz, albite, microcline, mica, and magnetite, and the hair surface was painted by incorporating black materials containing magnetite.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.1-11
• /
• 2021

In order to reuse existing onshore turbine foundations, it is important to redesign and reinforce the existing foundations according to the upgraded tower diameter and turbine load. In the present study, a slab extension reinforcement method and structure details of an anchorage part were examined in consideration of the reuse of spread footings, which are the most widely used foundation type in onshore wind turbine foundations. Experiments were conducted to evaluate the load resistance performance of a reinforced spread footing according to structure details of an anchorage part. The results showed that (1) the strength of an anchorage part could be increased by more than 30 % by adding reinforcement bars in the anchorage part, (2) pile-sleeves attached to an anchor ring contributed to an increase in rotational stiffness by preventing shear slip behavior between the anchor ring and the concrete, and (3) slab connectors contributed to an increase in the strength and deformation capacity by preventing the separation of new and old concrete slabs.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.2
• /
• pp.193-200
• /
• 2010

Due to the characteristic of culvert structure, the standard section of the culvert has been established and applied in field. However, this becomes a limitation in selecting a section design corresponding to various field conditions although it can improve the design and applicability of culvert structure. In order to overcome this limitation, we have developed the design and application technology of culvert structure corresponding to the field conditions that various shapes of culvert structure can be covered by assembly of precast segments. Because the structural characteristics of assembling-type waterway culvert structure, the thickness of structure and amount of reinforcing rods can vary according to the fixation or internal hinge status in the connection part of precast segments. This has a strong influence on the applicability and economic efficiency of culvert structure. Accordingly, in order to suggest a reasonable modeling technique of segment connection parts, this study has conducted the field experiment and numerical analysis. According to the results of field experiment and numerical analysis, the slab, wall and base slab with mortar splice sleeves have shown that the assembling-type of waterway culvert structure behaves like an integrated structure.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.4
• /
• pp.203-214
• /
• 2023

In this study, the physical properties and fracture characteristics according to the tensile load are evaluated on the materials of the polymeric filler and carbon fiber-based composite sleeve technique. The polymeric filler and the composite sleeve technique are applied to areas where the pipe body thickness is reduced due to corrosion in large-diameter water pipes. First, the tensile strength of the polymeric filler was 161.48~240.43 kg_f/cm², and the tensile strength of the polyurea polymeric filler was relatively higher than that of the epoxy. However, the tensile strength of the polymeric filler is relatively very low compared to ductile cast iron pipes(4,300 kg_f/cm²<) or steel pipes(4,100 kg_f/cm²). Second, the tensile strength of glass fiber, which is mainly used in composite sleeves, is 3,887.0 kg_f/cm², and that of carbon fiber is up to 5,922.5 kg_f/cm². The tensile strengths of glass and carbon fiber are higher than ductile cast iron pipe or steel pipe. Third, when reinforcing the hemispherical simulated corrosion shape of the ductile cast iron pipe and the steel pipe with a polymeric filler, there was an effect of increasing the ultimate tensile load by 1.04 to 1.06 times, but the ultimate load was 37.7 to 53.7% compared to the ductile cast iron or steel specimen without corrosion damage. It was found that the effect on the reinforcement of the corrosion damaged part was insignificant. Fourth, the composite sleeve using carbon fiber showed an ultimate load of 1.10(0.61T, 1,821.0 kg_f) and 1.02(0.60T, 2,290.7 kg_f) times higher than the ductile cast iron pipe(1,657.83 kg_f) and steel pipe(2,236.8 kg_f), respectively. When using a composite sleeve such as fiber, the corrosion damage part of large-diameter water pipes can be reinforced with same level as the original pipe, and the supply stability can be secured through accident prevention.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.4
• /
• pp.447-458
• /
• 2024

This study investigates the effectiveness of Building Information Modeling(BIM) software, specifically SketchUp and Revit, in reducing errors during quantity take-off(QTO) for complex building elements. While 3D modeling offers advantages, existing software may not fully account for manufacturing discrepancies, such as variations in concrete cover thickness and reinforcing bar radius. To address this limitation, this research proposes a BIM-based QTO method for high-insulation wall panels with intricate details. The method utilizes a BIM family library, focusing on key parameters like concrete cover thickness and inner radius of shear reinforcement. A case study compared the cross-sectional details of a wall panel modeled in Revit with the actual manufactured specimen. The analysis revealed a 12% reduction in modeled concrete cover thickness and a 1.27 times larger modeled inner radius of the shear bar compared to the real-world values. The proposed method incorporates these manufacturing variations into the Revit model of the high-insulation wall panel. Software like Navisworks facilitates the identification and correction of any material interferences arising from these adjustments. Furthermore, the method employs a unit wall concept(1m²) to account for the volume of various materials, including insulation and splice sleeves at joints. This allows for the identification of a similar existing family within the BIM library(e.g., "Double RC wall with embedded insulation") that reflects the actual material quantities used in the wall panel. By incorporating these manufacturing-induced variations, the proposed method offers a more accurate QTO process for complex high-insulation wall panels. The "Double RC wall with embedded insulation" family within the Revit program serves as a valuable tool for material quantity estimation in such scenarios.

• International Journal of Advanced Culture Technology
• /
• v.12 no.3
• /
• pp.21-28
• /
• 2024

The public can access movies more easily than any other cultural genre. The film's costumes convey the social, political, and cultural climate of that time period. Additionally, it subtly conveys the message of the movie, including the intentions of the director and the characters. Filmmakers can now use fact-based materials to plan their films, and audiences can now watch costume in movies with objective standards, particularly in period dramas, thanks to the advancements in over-the-top (OTT) services. The 77th British Academy costume Award went to the movie Napoleon because of how much emphasis it placed on the outfit. Ninety-five percent of the costume was made by experts in military uniforms and costumery. In contrast to the previous aristocratic and exaggerated Rococo costume, Napoleonic clothing had a natural and common-class character. A natural-shaped Chemise dress composed of light, reflective material first appeared in the Directoire era, just after the French Revolution. Chemise dresses made of a variety of materials gained popularity during the Empire era. With Napoleon taking the throne and Josephine becoming the empress, the vibrant court culture resurfaced during the Empire era. The silk was embellished with gold thread and embroidery, train dangling forms, and different types of sleeves appeared in Empire styles. They wore Pellisse and shawls under the coat. The hair style had long, ancient hair and was adorned with fillets. They also wore straw hats, bonnets, and caps. Long gloves and parasols were also popular accessories, as were pearl or colored jewelry necklaces, earrings, bracelets, and rings. During the Empire era, tiaras were fashionable. Shoes were either low-heeled pumps or sandals. The movie uses Chemise and Empire costumes, which are versatile enough to be used in a range of settings and eras. When it came to details, the type of sleeve was employed without regard to time, such as when using those from an earlier or later period. Since jewelry was worn more often than not in that era, practically every character has earrings on their necklaces. Nearly exact replicas of the coronation costume can be found in paintings by Jacques-Louis David. The red trains, Josephine's Empire dress, the crown, the Tiara, and the costumes of every character in attendance were all clearly identifiable in terms of form and color. To further aid viewers in understanding and enhancing the film's overall coherence, a scene featuring David drawing the coronation was added. Overall, there were differences in that the historical costumes were accurately recreated, the materials and details were utilized without restriction, and some of the costumes were designed with modern materials or accessories that were used more than the historical costumes. This section appears to have been written to highlight the beauty of the characters' personalities or settings. There is a limitation to this study in that it only looked at aristocratic clothing, which includes Josephine's. We will concentrate on male clothing in future research.

• The Korean Journal of Ecology
• /
• v.17 no.3
• /
• pp.355-366
• /
• 1994

The purpose of this study was to investigate the changes of water quality and the patterns of self-purification with season in Gokneung stream. The vegetation in the ecosystem around Gokneung stream was dominated by Quercus species. In the physicochemical analysis based on the contents of DO, BOD, conductivity and total phosphorus, the upstream seemed to have been polluted, but the downstream was self-purified. In biological investigation by bentic macroinvertebrates, the result was similar to that in the physicochemical analysis. The self-purification constant based on BOD of the upstream, 1.013, was the highest. In the self-purification constants with month, that of September was 0.995 and that of January was 0.272. These results indicated that the self purification capacities of spring and autumn were larger than those of winter and summer in Gokneung stream.

• Journal of the Korean Society of Costume
• /
• v.16
• /
• pp.15-42
• /
• 1991

A nation's culture isn't consisted by the characteristics of the nation only, but it is greatly affected by the geographical features and natural conditions, and it could be also dominated by the continual effect through mutual contact on economic exchange or social problem and political interests with neighboring countries. It is a well known fact that the contact of culture between Korea and Mongolia established under the special political situation that Corea was invaded by Won. But more basically, the Nomad including Mongolia had influenced upon neighboring countries, therefore, our country was also greatly influenced on consisting of our own culture by them. Moreover. the fact that our language belongs to their language's category(mostly Tweigru and Mongolian language) proves that the origin of our culture was deeply related with Mongolia. Accordingly, we could not limit the cultural relation between Korea and Mongolia within a special era. But especially, since unification of China by Mongolia, Won which appeared as a new great nation had dominated Corea for one hundred years, and the Corea's costume culture had a point of conversion to the mongolian. Therefore, this study expects to comment upon the relations of costume between Corea and Mongolia from a view point of Corea's tribute and royal gifts gifts by Mongolia written on the reference literatures. 1) From the ancient times, between our country and Mongolia there has been a direct or indirect exchange caused by the people's movement or invasion due to very closed neighboring. The relations between Corea and Mongolia have started from the mongolia's requests of tribute for the reason why they helped Corea against the Keoran's invasion, and these relation had continued by King Kongmin's age. 2) Mongolia had plundered a tribute such as dress, cereals, horses, military supplies, soldiers, maiden and little girls etc. from Corea, and therefore, a great confusion occurred on political, economic and social fields. And since King Chungyoul of Corea got married with a Princess of Won, the Corea's position was placed as the Buma nation(nation of son in law) and then high class people of Corea preferred to follow the mongolian costume such as Byunbal (pigtail), Ho dress (mongolian dress), Rouges, Chockturi (a kind of formal cap) and Doturak pigtail ribbon, and some have been applied up to date. On the other hand, the custom of Corea had transmitted to the Mongolian nobility, they called it "Corea Yang(style)". 3) The costume of Corea could be divided into three different periods, the first is the period influenced by Tang and Song's regime, the second is affected by the Won's costume and the third is applying the Myung's regime in the end of Corea. The Mongolian dress was based on the Ho dress form and it has been developed through compounding artistic traditional fields and foreign customs in long history. And Mongolia is composed of various tribes, therefore, they have their own dress for each tribe. Our country and Mongolia had a similar dress form based on Ho dress and both used the Chacksukunggo (jacket with small sleeves and slacks) and Seon(line). And the ornaments of costume such as Chockturi, Doturak pigtail ribbon and Rouges had transmitted and fixed down as a traditional wedding garment, but the Rouges has been used by noble women from the ancient times in our country. Since a member of the Society of Korean Costume has visited Mongolia in August 1990 for the first time, I really recognized the neccesity of more detailed study on the costume relation between Korea and Mongolia, and I will proceed with the study on various fields of costume under cooperation of Institute of Oriental Academy of Mongolia.

• Journal of Fashion Business
• /
• v.3 no.4
• /
• pp.147-160
• /
• 1999

This paper is intended to compare and analyze the fashion trends that were introduced in the recent shows, held abroad and in Korea, so as to investigate how well the designers in Taegu and Kyungbuk (TK) area are keeping up with the international vogue. The research has done, analyzing Pret-a-Porter in Paris and the three events held in the TK area in 1997 -The Taegu Collection, Kyungbuk Fashion Festival and Textile & Apparel Fair and using reference pictures and documentary records. In order to investigate the trends the research is divided by four groups which are the silhouette, the detail, the color and the Fashion image and has done with the help of three postgraduate students. The results are as follows. 1. The Silhouette The slim-line has the greatest importance in the silhouette analysis of the recent collections. Like Elongated and Fit & Flare, tight-fitting and female-line were also appeared quite a lot. Compared with foreign collection, Korean collections put the bigger importance on the slim-line. 2. The Detail The printings, using paintings and plant-logos had the large portion of the accessories in both foreign and Korean collections. Draw string and wrap style were also presented a lot. Especially, at the Korean collections, layerd, corsage, and craft accent were emphasized, too. As for the necklines the similarity was found over the four events considering. Camisole neckline and halter neck were presented the most, and bared top, Vneckline, boat and low-neck which can highlight the feminity were often appeared as well. Considering collars, tailored and peaked collars which are frequently used for the jackets, were usually shown at the collections. Like convertable, shirts, wing and Italian collar, the collars that can be applied for the sports wears were presented a lot. Virtually no variation of design was found in the sleeve analysis. While set-in-sleeve and sleeveless were found commonly, not so many ornaments were added to the sleeves. The ankle and knee length for the pants and skirts were common. Furthermore, including the micro-mini, showing extremely feminine style the mini-style had the 20% portion of the skirt-length. Unbalanced lengths, using bias-cut were presented quite a lot on the runways. Deep slit skirts, wide pants and irregular hem skirts were in vogue. On the runways of Paris, more than 21% of the design was the burmuda pants. 3. The Color Red and Blue were in vogue in the four collections considering. Sometimes, yellowish was combined in Korean collections. Black and pale tone were appeared to be in fashion also with light grayish, moderate and deep tone. 4. The Fashion image As for the fashion image, feminine-decorative trend amounted to the large percentage in korean collections. At the foreign collection feminine-decorative trend and feminine trend were predominant, then mannish trend and simple trend were apeared equally. The research shows that TK area and foreign collections are fairy similar, which means that the designers in TK area have been making their efforts to satisfy the clients who have the international minds. However, compared with foreign collections, TK collections were apprered to be strongly inclined to only a few trends. Consequently the season trends are not as diverse as the foreign trends, which cannot satisfy the fashion taste of the clients in TK area. The local designers should know the tendency and the taste of the clients and make the more efforts to read local clients' mind.

• KSBB Journal
• /
• v.10 no.5
• /
• pp.561-567
• /
• 1995

Using superoxide dismutase (SOD)-deficient mutants of Saccharomyces cerevisiae, the oxygen toxicity induced by paraquat was studied. In aerobic culture condition, yeasts lacking MnSOD (milochondrial SOD) showed more significant growth retardation than CuZnSOD (cytoplasmic SOD)-deficient yeasts. However, not so big differences in growth pattern of those mutants compared with wild type were observed under anaerobic condition. When exposed to paraquat, the growth of yeasts lacking CuZnSOD was severely affected by higher than 0.01mM of paraquat in culture medium. By the analysis of several cellular components ivolved in free radical generating and scavenging system, it was found that, under aerobic condition, the content of lipid peroxides in cell membrane as well as cellular activity of glutathion peroxidase of CuZnSOD-deficient mutants was increased in the presence of paraquat, although significant decrease of catalase activity was observed in those stratns. In MnSOD-deficient yeast, however, increment in cellular activity of glutathion peroxldase and catalase by paraquat was observed without any deterioration of membrane lipid. It implies that the lack of mitochondrial SOD could be compensated by both of glutathion peroxldase and catalase, but that only glutathion peroxidase might act for CuZnSOD in cytoplasm. In contrast, all of SOD-deficient mutants showed a significant decrease in catalase activity, but slight increase in the activities of glutathion peroxidase, when cultivated anaerobically in the medium containing paraquat. Nevertheless, any significant changes of lipid peroxides in cell membranes were not observed during anaerobic cultivation of SOD-deficient mutants. It suggests that a little amount of free radicals generated by paraquat under anaerobic condition could be sufficiently overcome by glutathion peroxidase but not by catalase.