• Composites Research
• /
• 제16권2호
• /
• pp.26-32
• /
• 2003

레이저 융착된 광섬유의 절단 부위에 대한 보호를 위한 관심이 크게 높아지고 있다 일반적으로 절단된 광섬유의 융착부분은 다른 부위에 비해 상대적으로 매우 취약하며 이러한 이유로 광섬유를 광 통신망에 사용할 때 동일 부분에서의 손실이 추가적으로 일어날 수 있다 일반적으로 광섬유 융착 부위는 일반 광섬유의 파괴 강도에 비해 약 1/10인 0.4～l kg로 감소된다. 이러한 이유로 인해 광 융착 부위의 보강이 절실히 요구되고 있다. 그러나, 이러한 구조물의 대부분이 철심 형태의 구조물을 삽입한 슬리브로 보강됨에 따라 굽힘에 대해 효과적으로 대응하지 못할 뿐 아니라 일단 구조물이 굽혀졌을 경우에는 지속적인 광 손실을 발생시키는 요인이 된다. 이러한 문제점을 보완하기 위하여 복합재료로 제작된 코일형 스프링 구조물 형태의 슬리브가 제안되었다. 이러한 슬리브는 기존의 슬리브의 취약점이었던 직하중에 대해 서로 효과적으로 반응할 뿐 아니라 굽힘 및 인장/압축 하중에도 효과가 있음을 알 수 있었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.254-257
• /
• 2004

Fiber placement system (FPS) carries out an advanced composites process which orients high strength reinforcing fibers in specific directions. The process includes wet winding, thermoset tape winding, thermoset prepreg placement and thermoplastic prepreg placement. FPS have the advantage of tape laying and filament winding with computer control and software. Using FPS can reduce costs, cycle times, structural weight, and handwork/rework when manufacturing composite parts. The sleeve extension is a part of the helicopter rotator systems. In this study, The sleeve extension composites were manufactured using FPS and tensile properties of this composites were characterized using universal testing machine(UTM).

• 대한가정학회지
• /
• 제35권4호
• /
• pp.185-198
• /
• 1997

This study was initiated to research on the uniform preference uniform satisfaction and wearing of female workers' uniform of the fiber firms. Data was obtained from 361 female workers of the fiber firms in Chon Buk. And it was analyzed by frequency percent mean duncan's multiple test. The results of this study were as follows; 1) Pocket sleeve and front hem were parts of the damage. The weaving workers were mostly wore upper and under garments but most of there workers were only wore an upper garment on the basic type of uniform The older and married were small in the fitness of uniform the armhole sleeve girth sleeve length and breast girth were unfitted 2) Workers was dissatisfied to the noise and the dust in working environment. Uniform satisfaction of workers were mostly low design color and fabric were the lowest factors of uniform satisfaction. The satisfaction of material were also low the lowest factors were absorptiveness elasticity breathability. Workers wanted the fashion and light colored uniform but they prefered function activity to work and manageability on wearing rather than externals among the uniform preference.

• 한국정밀공학회지
• /
• 제23권3호
• /
• pp.61-68
• /
• 2006

This paper is to investigate the influence of the endface quality on the loss characteristics of a plastic optical fiber(POF) connector and the stability of new designed sleeve for in-car network service. Using the parameters of the surface roughness and applied load, insertion loss of connector is measured. Endface condition for optimizing the connection is presented by the surface roughness satisfying loss criteria and the stress for minimizing the loss, $R_{rms}=8nm$ and 19 MPa, respectively. By vibration test and dynamic loss measurement, we show the stability of the new designed sleeve.

• 상하수도학회지
• /
• 제37권4호
• /
• pp.203-214
• /
• 2023

In this study, the physical properties and fracture characteristics according to the tensile load are evaluated on the materials of the polymeric filler and carbon fiber-based composite sleeve technique. The polymeric filler and the composite sleeve technique are applied to areas where the pipe body thickness is reduced due to corrosion in large-diameter water pipes. First, the tensile strength of the polymeric filler was 161.48~240.43 kg_f/cm², and the tensile strength of the polyurea polymeric filler was relatively higher than that of the epoxy. However, the tensile strength of the polymeric filler is relatively very low compared to ductile cast iron pipes(4,300 kg_f/cm²<) or steel pipes(4,100 kg_f/cm²). Second, the tensile strength of glass fiber, which is mainly used in composite sleeves, is 3,887.0 kg_f/cm², and that of carbon fiber is up to 5,922.5 kg_f/cm². The tensile strengths of glass and carbon fiber are higher than ductile cast iron pipe or steel pipe. Third, when reinforcing the hemispherical simulated corrosion shape of the ductile cast iron pipe and the steel pipe with a polymeric filler, there was an effect of increasing the ultimate tensile load by 1.04 to 1.06 times, but the ultimate load was 37.7 to 53.7% compared to the ductile cast iron or steel specimen without corrosion damage. It was found that the effect on the reinforcement of the corrosion damaged part was insignificant. Fourth, the composite sleeve using carbon fiber showed an ultimate load of 1.10(0.61T, 1,821.0 kg_f) and 1.02(0.60T, 2,290.7 kg_f) times higher than the ductile cast iron pipe(1,657.83 kg_f) and steel pipe(2,236.8 kg_f), respectively. When using a composite sleeve such as fiber, the corrosion damage part of large-diameter water pipes can be reinforced with same level as the original pipe, and the supply stability can be secured through accident prevention.

• 한국방재학회 논문집
• /
• 제8권6호
• /
• pp.1-5
• /
• 2008

피복이 없는 FBG센서는 내구성이 매우 약하기 때문에 FBG센서 주위의 피복이 없이는, 많은 변수가 존재하는 실제 자연환경에서의 정확한 데이터수집이 어렵다. Steel sleeve packaged FBG 변형률 센서는 토목공학에서 널리 사용되고 있는 센서 중 하나이다. 변형률과 온도가 동시에 측정되는 FBG센서의 도입 이후로, 변형률과 온도의 정확한 보정은 필수적인 과정이 되었다. 이 논문에서는 FBG의 변형률과 온도의 측정 원리에 기초하여 steel sleeve packaged FBG센서의 온도보정 기술을 도출하였다. 그리고 두개의 FBG센서를 이용한 콘크리트 초기재령의 건조수축 실험을 통해 온도보정의 실행 가능성을 확인하였다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1983년도 추계학술발표회논문집
• /
• pp.44-47
• /
• 1983

Through intensity modulation induced by micro bending of an optical fiber, a sensor detects the pressure and frequency of acoustic wave has been implemented. Axial slots on the cylinder suface with a period of 5.5 mm induce efficient microbending of the fiber, and a rubber sleeve covering the fiber enhances the fiber. Compared with a conventional hydrophone, it has a low minimum detectable pressure and can detect acoustic wave in 100Hz - 2KHz range.

• 한국농공학회논문집
• /
• 제46권1호
• /
• pp.41-51
• /
• 2004

FRP re-bar in concrete structures could be used as a substitute of steel re-bars for that cases in which aggressive environment produce high steel corrosion, or lightweight is an important design factor, or transportation cost increase significantly with the weight of the materials. But FRP fibers have only linearly elastic stress-strain behavior; whereas, steel re-bar has linear elastic behavior up to the yield point followed by large plastic deformation and strain hardening. Thus, the current FRP re-bars are not suitable concrete reinforcement where a large amount of plastic deformation prior to collapse is required. The main objectives of this study in to evaluate the tensile behavior and the fracture mode of hybrid FRP re-bar. Fracture mode of hybrid FRP re-bar is unique. The only feature common to the failure of the hybrid FRP re-bars and the composite is the random fiber fracture and multilevel fracture of sleeve fibers, and the resin laceration behavior in both the sleeve and the core areas. Also, the result of the tensile and interlaminar shear stress test results of hybrid FRP re-bar can provide its excellent tensile strength-strain and interlaminar stress-strain behavior.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.172-175
• /
• 2004

This study is to investigate the tensile properties of glass fiber reinforced polymer(GFRP) reinforcing bars with various kinds of anchor systems experimentally. Three types of anchor systems were examined: resin sleeve anchor adopted by CSA Standard, metal overlay anchor by ASTM Standards and wedge anchor normally used in prestressing tendons. Also, three different types of GFRP bars with different surface deformations were tested in this study. All test procedures including specimens preparation, test apparatus and measuring devices were made according to the recommendations of CSA Standard S806-02. From the test results, it was found that the highest tensile strength of GFRP bar was developed by resin sleeve anchor, and tensile strength of GFRP bar with CSA anchor system is $10\%$ higher than that with ASTM anchor system in the case of sand-coated GFRP bar.

• 한국가스학회지
• /
• 제20권5호
• /
• pp.96-103
• /
• 2016

도시가스 배관의 손상부에 대한 적절한 보수방법은 안전한 가스이송 및 가스 배관의 파손으로 인한 경제적 손실을 줄일 수 있는 중요한 요소이다. 육성용접, type-A 슬리브, type-B 슬리브 그리고 복합재료 슬리브와 같은 보수 방법들이 현재 도시가스 배관 보수에 사용되고 있다. 본 연구에서는 여러 보수방법중 비교적 손쉬운 보수절차로 인해 작업자의 숙련도에 의존하지 않으며 쉽고 경제적으로 보수 할 수 있는 복합재료 슬리브를 이용한 보수방법에 관한 연구를 수행하였다. 특히 탄소섬유 프리프레그를 사용한 복합재 보수방법과 그 결과에 대해 논의하였다.