• The Research Journal of the Costume Culture
• /
• v.14 no.3 s.62
• /
• pp.404-417
• /
• 2006

The purpose of this thesis, therefore, is to examine the shaping methods and the knitting drafts of sleeve cap in the knitwears which are currently used by the manufacturers; to study the curve forms of sleeves in knitwears by analyzing synthetically the results of investigating the problems of knit wear sleeves; to present the most suitable sleeve cap for the knitwears. As the studying methods, I collected the basic data from the working-level persons of knit wear manufacturers, examined the knitting draft in the knitwears, and from that, made three kinds of comparative experimental garments and one kind of research experimental one as 10G and 16G. In doing so, I showed the sleeve cap suitable for the knitwears with plain stitch after operating sensual evaluation with Liker's 5-point rating measure. The analysis of data was handled with statistics by using SPSS Ver. 12.0; the method of statistics was executed by Frequency Analysis, Trust Analysis, one-way ANOVA, and Duncan test according to each topic of the research. As the result of the sensual evaluation of the experimental garments produced from the study, the research experimental garment looks better than the comparative experimental one in both 10G and l6G; has less extra folds around the front part of sleeve cap; looks more natural in sleeve caps of the body part and of a sleeve. From this, I am able to figure out that the research experimental garment looks better than the comparative experimental one produced by knit wear manufacturers. In addition, I can come to know that the different knitting of the front line and the back one of armhole in the knitwears has a favorable impact on improving the appearance of a sleeve.

• Journal of Korea Foundry Society
• /
• v.25 no.4
• /
• pp.168-172
• /
• 2005

In this study, the effects of chill layers occurred in shot sleeve on the molten metal filling were analyzed through computer simulation and the behavior of chill layers with temperature variation of shot sleeve set from 200 to $280^{\circ}C$ was also investigated. The simulation results showed the chill layers set in the in-gates during the injection process change the main filling direction and cause turbulent flow pattern, resulting in porosities inside the castings. The amount of chill layers with the increasing temperature of shot sleeve was considerably reduced. And particularly, at the setting temperature of $280^{\circ}C$ by heat control unit, the big reduction in chill layers, excellent trimmed surface and the highest densification were achieved, suggesting that as the optimal sleeve condition in diecasting, especially for the highly complex parts like valve body.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.2
• /
• pp.21-27
• /
• 2014

In this paper, a planar sleeve monopole antenna for indoor digital TV reception is presented. The antenna has broadband property with the planar monopole and ground of sleeve. Sleeve monopole and ground conductors of the antenna are on the same plane, and exited through CPW feeding. Sleeve monopole and ground of proposed antenna exist on coplanar plane, and excite as CPW. It used FR4 epoxy dielectric substrate of ${\varepsilon}r=4.4$, and the size is $20[mm]{\times}170[mm]{\times}1.6[mm]$ dimension. So the internal antenna is suitable. The measurement results of the fabricated antenna, return loss is larger than -10 [dB] in 470~806 [MHz]. Maximum gain is 0.59 [dBi] on E-plane at 810 MHz and 1.70 [dBi] on H-plane at 640 [MHz]. Radiation pattern is about the same that of dipole antenna at all frequency.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.7
• /
• pp.892-900
• /
• 1998

This study was done to analyze the surface development of upper arm for planning sleeve armhole line. The major conclusions of this study are: 1. The surface development by arm movements made the expansion and contraction of upper arm surface changes easily visible. Armhole lines of 90$^{\circ}$and 135$^{\circ}$~180$^{\circ}$movements deviated from those of standard posture. 2. According to regression analysis, armhole lines on the upper arm were adapted to sleeve patten, following the axillary circumference line changed to biceps line. Sleeve cap length ranged from armhole/4+2.5cm to armhole/4$\pm$0.5cm. 3. Compared to Rim's pattern method, ascending and descending amounts of armhole lines were represented as fixed values.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.210-215
• /
• 2001

The pole antenna of vehicles for AM/FM radio broadcasting receptions has many probems, such as damageable mechanical system and noise etc. It is considered that noise is composed of the structural vibration noise and the air flow induced aerodynamic noise. Also we find out that the setting process of a printed on-glass automobile antenna has many difficulties. Recently, the above mentioned problems can be reduced by employing enhanced wiper antenna which utilizes the windshied wiper arm. The new system is a passive antenna. In this study, experiments for the characteristics of a wiper antenna by measuring the SWR, radiation pattern and received powe have been carried out. The experimental results show that the efficiency of the wiper antenna has better performance than any other antenna.

• The Research Journal of the Costume Culture
• /
• v.21 no.5
• /
• pp.755-764
• /
• 2013

This study intends to use the basic patterns in 3oz bodice and 2oz sleeve padded jackets made for women in their 20s to research the proper ease of 2oz bodice and 2oz sleeve, 4oz bodice and 3oz sleeve padded jackets. The study also proposes a method of designing padded jacket patterns according to padding thickness. The results of this study are as follows: The 2oz bodice and 2oz sleeve padded jackets had the following sizes. The front and back bust, waist, and hip circumferences were calculated as B/4+2.5cm and B/4+3cm, W/4+2.6+3.3(D)cm and W/4+1.5+2.6(D)cm, and H/4+2.8cm and H/4+3cm, respectively. The length of the jacket was 62.4cm, and the sleeve length was calculated as 63.4cm. For the 4oz bodice and 3oz sleeve padded jackets, the front and back bust, waist, and hip circumferences were calculated as B/4+4cm and B/4+4cm, W/4+4.1+3(D)cm and W/4+2.5+3.6(D)cm, and H/4+4.3cm and H/4+4cm, respectively. The length of the jacket was 63.2cm, and the sleeve length was calculated as 64.2cm. The results of this study showed that padded jackets with thicker padding need more ease. For jackets with stitches, the decreased lengths must be added in the pattern length. The 2oz bodice and 2oz sleeve, 4oz bodice and 3oz sleeve padded jackets all scored 4 points or higher in the movement functionality assessment, thus showing outstanding movement functionality.

• The Research Journal of the Costume Culture
• /
• v.12 no.6 s.53
• /
• pp.953-970
• /
• 2004

The purpose of this study was to design men's jacket pattern for variable body types by employing the data of wearing evaluation from experimental basic bodices selected by male subjects in the 30's. As a result of sensory evaluation, functional test and clothing pressure test by each type of experimental basic bodices, the 3rd experimental basic bodice was chosen to be a basic bodice type in this research since it showed a high degree in fitness and function, but a low in the clothing pressure test. As a comparison of one item from conventional jacket and sleeve pattern with each somatotype, the type 2(the standard somatotype) indicated a great fitness in both basic bodice type and conventional jacket pattern, whereas the type 1 and the type 3 showed higher fitness and moving function in the basic bodice type. In the making of men's jacket, many corrections were made in the front interscye breadth, back interscye breadth, front and back length, and shoulder line as adapting each body type. Thus, the ease-amount of chest circumference at scye for clothes should be established differently according to the size of chest circumference at scye.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.6
• /
• pp.1031-1040
• /
• 1997

This study was done to analyze the body surface developments of armhole area. The major conclusions of this study are: 1. The body surface developments showed the characteristics of expansion and contraction of body at armhole area. By arm movements, front armhole lines on the body surface developments of upper arm were slow going, but back armhole lines were full and round. As a whole, armhole line of the back torso was swollen outside especially at backarmpit point area, it seemed like a line of raglan sleeve. 2. Regression Analysis was carried out to adapt armhole line on the upper arm and upper body to bodice and sleeve pattern, following the axillary circumference line and chest breadth line changed to the basic pattern form. As the result, armhole lines of 90$^{\circ}$ and 135-180$^{\circ}$ movements deviated from those of standard posture. U-type, clear armhole curve of standard posture turned to V-type, slanting line by arm movements.

• Journal of the Korean Home Economics Association
• /
• v.19 no.3
• /
• pp.21-32
• /
• 1981

Clothing must have the individual beauty and the function that one can do one's body movement freely. therefore, from the human engineering view point, the exact measurement of the human body and the analysis of it's results must be applied to clothing because the arm works most. In this study, the skin surface of arm was investigated by shell made of Alginate of each movement. And by sometic method the rate of expansion and contraction of each section, inter-relation among the bust girth, axillary arm girth and scye girth and between the shoulder length right and the under axilla waist length were calculate4d. With these results, cap height, breadth of a sleeve and arm hole girth of existing sleeve pattern have been compared and analysed. The results are as follows; 1) According to the developmental figures of shell, the whole area change was small but that of shape was remarkable in M 4, 9, 13. The change of the Block 1 was particular. 2) Over arm length was contracted in all movements except M6 and under arm length expanded. The changes of sections a, b, c are large, while those of sections d, e are small. 3) In terms of latitudes, change of fore-arm region was small. The rate of scye girth varied from 14.3% of M13 to-5.6% of M2. The breadth of a sleeve expanded in all movements, and especially the front region expanded more than the back. 4) The relation between the shoulder length right and under axilla waist length, in all occasions, was contracted mutually, and one contracted, the other expanded. Therefore, in clothing construction when we consider the function of the arm it is better to widen the arm hole and the breadth of a sleeve at the same time than no widen the shoulder length by lowering the upper part of the upper side seam line.

• The Research Journal of the Costume Culture
• /
• v.17 no.6
• /
• pp.992-1008
• /
• 2009

This study is to present a female high school summer blouse with high movement functionality and satisfying appearance. For the experimental research 6 subjects with closest average body shapes and their body surface was measured at beginning and after selecting a representative movement the tested uniform was worn and the appearance and movement functionality was evaluated. The results of this research are as follows. In the research with the aims to improve the sleeve designed the height in 3 types as A.H/4+3, A.H/4+2, A.H/4+1 and their evaluation showed that in the order of best appearance was A.H/4+2, A.H/4+1, A.H/4+3. In the order of best comfort was A.H/4+2, A.H/4+3, A.H/4+1 and the best order for movement functionality was A.H/4+1, A.H/4+2, A.H/4+3. Additional height types designed produced from elastic materials were A.H/4+3, A.H/4+2, A.H/4+1 and the resulting order of appearance was A.H/4+3, A.H/4+2, A.H/4+1, order of comfort was A.H/4+3, A.H/4+2, A.H/4+1 and the order of movement functionality was A.H/4+1, A.H/4+2, A.H/4+3. Integrating these results shows that in using the same concurrent materials, the experiment pattern of setting the sleeve height as A.H/4+2 was the best while in using elastic materials, the experiment pattern of setting the sleeve height as A.H/4+3 was the best.