• 한국의류산업학회지
• /
• 제25권5호
• /
• pp.593-602
• /
• 2023

This study aimed to facilitate the use of virtual technologies such as sewing, appearance, and material expression in 3D virtual wear programs. For product production and education, we expounded how to express the shoulder shape and silhouette of sleeve-expanded power shoulder jackets. Two designs of sleeve-expanded power shoulder jackets were selected, and virtual jackets were produced using a virtual avatar based on the body dimensions of female subjects in their 20s. The essential purpose of a 3D virtual power shoulder jacket is to express the shoulder angle rise and shoulder width, which are much wider than the avatar's shoulder. Therefore, the virtual pad values were adjusted for the collision and rendering of each thickness. In addition, the position and angle of the virtual pads were controlled through simulation. Appearance similarity was evaluated using photographic data and the virtual jackets. For the set-in sleeve virtual power shoulder jacket, the wrinkle expressions of the torso and sleeve were rated as moderate, and material expression was slightly insufficient. The similarity of some ease and width items of the torso was tightly expressed, and the overall appearance, positions of lines, and details of jackets were rated high, especially at the neck and sleeve shapes. In the case of the kimono virtual power shoulder jacket, the expressions of the torso wrinkles and buttons were slightly lower; however, the overall similarity, basic lines, ease, shoulder and neck details, and material expression of the virtual jackets were highly evaluated.

• 한국콘텐츠학회논문지
• /
• 제13권7호
• /
• pp.131-140
• /
• 2013

여성복에 있어서 09/10년 시즌에 가장 주목할 만한 특징은 파워 숄더 룩이다. 파워 숄더 룩은 단순히 패션니스타들에서만이 아니라 당당히 스트리트 패션의 하나로 자리 잡았으며 파워 숄더 룩의 50%이상을 차지하는 재킷이 여성복의 핵심 아이템의 하나로 부활하면서 재킷의 어깨 각도는 0도에서 30도 이상까지 다양하게 나타난다. 다양한 어깨 각도 중 10도, 15도, 20도의 형태가 70%이상을 차지하고 있으며 패턴의 형태는 몸판의 어깨선을 자연스럽게 올리고 확장한 어깨변형 패턴, 어깨선과 함께 소매산 부분을 절개한 소매산 변형 패턴, 몸판과 소매가 연결된 패턴이 주를 이루고 있다. 파워 숄더 패턴 전개는 어깨 각도가 높아질수록 각이 시작되는 점이 목옆점에 가깝게 하고 어깨끝점이 확장되어야 소매의 외관형태가 편안하고 피트성이 좋아진다. 어깨 변형의 경우 앞뒤 진동선의 시작점인 어깨점과 소매산의 정점 부분의 선이 완만하게 이어지도록 S라인형태를 유지하는 것이 가장 중요하며 소매산의 ease분량이 일반 재킷 소매보다 많아야 파워 숄더 실루엣이 자연스럽게 연출된다. 소매변형 패턴은 중심쪽 소매의 소매산 높이는 기본소매 소매산높이의 1.5cm를 외곽 소매분량으로 처리한 것을 고려하여 소매산 높이를 설정하고 어깨 각이 커질수록 외곽소매의 소매산 폭을 크게 함으로서 소매의 어깨점이 목옆점 방향으로 휘지 않고 각이 선 파워 숄더가 완성된다. 소매변형과 소매와 몸판연결 패턴의 경우 어깨점과 상완이 연결되는 부분에 충분한 여유가 필요하며 어깨각도도 다른 형태에 비해 상대적으로 낮아 보인다. 이와 같이 파워 숄더 재킷 패턴은 패턴 제작시 디자인적인 요소를 충분히 감안한 패턴 설계와 함께 소매의 달림선 위치, 어깨너비, 어개 높이 확장량, 소매통의 여유량 등을 고려하여 제작하는 것이 바람직하다.

• 한국전자파학회논문지
• /
• 제14권2호
• /
• pp.178-182
• /
• 2003

본 논문에서는 광대역 특성을 갖는 로딩 슬리브 모노폴의 구조를 이용하여 PCS 및 IMT-2000 대역에서 사용 가능하고, 안테나 전장이 현재 상용화되어 PCS 휴대용 단말기에 사용되고 있는 헤리컬 및 휩 결합형 안테나보다 짧은 로딩 슬리브 모노폴을 설계, 제작하였다. 설계, 제작한 로딩 슬리브 모노폴은 안테나 전장이 38 mm, 슬리브 부분의 직경은 8 mm이다. 제작한 안테나의 측정 결과는 PCS 및 IMT-2000주파수 대역인 1750 MHz~2170 MHz에서 VSWR은 1.5 이하이고, 이득은 3.5 dBi이다.

• 한국의류학회지
• /
• 제19권6호
• /
• pp.911-923
• /
• 1995

The zone of expansion and contraction of arm surfaces was analyzed, the correlation between arm surface changes was studied, and ergonomic sleeve designs were presented in which the consideration of body surface changes is emphasized. Experiments were carried out which include 43 upper extremity segments, 21 motions and 35 female subjects. The major conclusions of the study are as follows : 1. As a sleeve drafting method, detailed measures should be applied on the base of the sensitivity of body surface changes. The range of arm surface changes can be divided into three zones : concentrated expansion zone, zone of little change, and contraction part. The maximum expansion zone was the upper part of elbow. 2. The correlations were higher in lengths than in circumferences. Arm lengths were mainly correlated with upper arms. The more detailed the arm surface was, the lower the correlations between surface changes were. So there was not a lot of relation between segment changes. Tendency of body surface changes depended on the anatomical structure of the upper extremity and the movements of arm muscles. 3. As an application of measures and ease, ergonomic sleeve designs weve presented in which arm surface changes were considered. Ergonomic sleeve designs are recommended for working clothes and sports wear.

• 한국화재소방학회논문지
• /
• 제19권1호
• /
• pp.46-50
• /
• 2005

본 논문에서는 작업복의 연소특성을 실험적으로 연구하였으며, 초기 점화위치는 상의소매 부분, 상의전면 중앙부분 및 하의무릎 부분으로 하였다. 실험결과는 다음과 같다. 미연소 질량비는 점화위치가 하의무릎 부분의 경우가 가장 빨리 감소하며 다음으로 상의소매 부분, 상의전면 중앙부분의 경우 순으로 감소하였다. 최고평균표면온도는 점화위치가 상의소매 부분, 상의전면 중앙부분, 하의무릎 부분의 경우 순으로 높게 나타났다. 연소 중 최고복사열유속은 점화위치가 상의소매 부분$(0.5\;W/cm^2)$, 상의전면 중앙부분 $(0.45\;W/cm^2)$, 하의무릎 부분$(0.44\;W/cm^2)$의 경우 순으로 높게 나타났다.

• Journal of Welding and Joining
• /
• 제17권1호
• /
• pp.82-87
• /
• 1999

The basic remote sleeve repair-welding technology by the pulsed Nd:YAG laser for increasing the lifetime of the steam generator tube in a nuclear power plant has been developed. The relationship between the connection width and welding parameters have been investigated for the fundamental research to apply the sleeve-repair-welding technique to the nuclear industry. The Inconel 600 tube and Inconel 690 sleeve used for high temperature and high pressure service were welded as round lap welding by Nd:YAG laser. It was observed that the tensile shear strength, 340MPa of the welded specimen is equivalent to about 60% of that of the base metal (Inconel 600), 550MPa. The difference between the hardness of the base metal and that of the laser welds was about 10%. Ductile fracture was partly occurred in the weld but the cracking has not been observed. In spite of absence of the crack, the strength of welds was not sufficient in terms of the tensile shear strength.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권4호
• /
• pp.79-88
• /
• 2012

본 연구에서는 고강도 모르타르 충전식 기계적 슬리브 철근이음에 대한 단조가력 하에서의 강성을 보다 적절하게 평가하기 위하여, 슬리브 철근이음의 주요한 구조요소가 미치는 단조가력 하에서의 철근이음 강성에 대한 영향을 검토하였고 AIJ 규준에서 설정한 단조가력 하에서의 슬리브 철근이음에 대한 강성 기준과 비교평가하였다. 이것을 위하여 단조가력을 실시한 국내외 189여개 고강도 모르타르 충전식 기계적 슬리브 철근이음의 실험데이터를 조사하고 그 실험결과를 분석하였다. 그 결과, AIJ 규준에서 규정하는 목표 강성을 확보하는데 필요한 $f_g$(L/d)의 한계값을 철근의 종류와 슬리브의 종류에 따라서 각각 제시하였다.

• Journal of Chest Surgery
• /
• 제27권5호
• /
• pp.413-417
• /
• 1994

Adenoid cystic carcinoma usually grows in the trachea or near its bifurcation and causes obstruction of the air way. We recently experienced a 33 year-old male patient who had adenoid cystic carcinoma in the left main bronchus with the chief complaint of productive cough. On the bronchoscopy, the mass obstructed the left main bronchus completely and had nodularity and increased vascularity.The trachea was shifted to the left side and the lower lobe of the left lung was atelectatic on chest X-ray and computed axial tomogram.He underwent left tracheal sleeve pneumonectomy and lymph node dissection through bilateral thoracotomy. At first,we attempted left tracheal sleeve pneumonectomy through the left thoracotomy,however, it was very difficult to perform carinoplastic procedure after sleeve resection of 2.5cm of distal trachea and 1cm of proximal right main bronchus including whole left lung because of poor operative field and difficulty in the anastomosis of the right main bronchus to the distal end of the trachea without tension.Therefore after radical resection of the left lung we made right thoracotomy,through which we could anastomosed the distal trachea and right main bronchus with 4-0 PDS interrupted suture after mobilization of the right hilum without difficulty. The tumor was confirmed to be adenoid cystic carcinoma with metastasis to subcarinal lymph node histopathologically. Postoperative course was uneventful but he needed two bronchoscopic procedure to clear distal airway of the retained bronchial secretion. He was discharged at 14 days after operation with complete recovery.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.698-704
• /
• 2006

In this study, the effect of chill layers occurred in shot sleeve on the molten metal filling was analyzed through computer simulation. The behavior of chill layers with temperature variation of shot sleeve set from 200 to $280^{\circ}C$ was also investigated. The simulation results showed the chill layers set in the in-gates during the injection process change the main filling direction and cause turbulent flow pattern, resulting in porosities inside the castings. The amount of chill layers with the increasing temperature of shot sleeve was considerably reduced. Particularly, at the setting temperature of $280^{\circ}C$ by heat control unit, the biggest reduction in chill layers, excellent trimmed surface and the highest density were achieved, suggesting that as the optimal sleeve condition in aluminum high pressure diecasting, especially for highly complex parts like valve body.

• 대한기계학회논문집A
• /
• 제21권6호
• /
• pp.884-895
• /
• 1997

The finite element analysis for the tubular alumina liner which was shrink-fitted into a heat treated high speed steel (HSS) sleeve and subjected to high inner pressure and high temperature was performed. The parameters for the analysis were the interference between the alumina and the HSS, the temperature, the inner pressure, the coefficient of friction between the alumina and the HSS, and the taper at the sleeve ends. From the analysis, it was found that the tensile hoop stresses were decreased when the end parts of the HSS sleeve were tapered and the tensile stresses were decreased as the coefficient of friction between the alumina and the HSS was decreased. Also it was found that the alumina might be used as the structural liner for high pressure and high temperature when it was shrink-fitted into a heat treated HSS sleeve.