• 한국세라믹학회지
• /
• 제55권1호
• /
• pp.36-43
• /
• 2018

The physical and chemical analyses of mineral waste such as moisture content, water absorption, freezing-thawing resisting sexual, chemical composition and crystal structure were investigated. In the technological process of crushing, screening, molding, drying, preheating, sintering and cooling, many parameters were changed to eliminate the influence of freeze thaw stability and the ball billets were processed into slate ceramsites eventually. Adopting orthogonal experiment and range analysis, the optimal technology parameters were confirmed as preheating temperature of $300^{\circ}C$ for 25 minutes and sintering temperature of $1230^{\circ}C$ for 20 minutes. Slate wastes in Shangri-la could foam and expand without any additive. The ultra-light ceramsite could be directly used as building aggregate, since the analysis results of its leaching toxicity were eligible. Besides, effects of sintering temperature on physical property and crystal phase were also explored in this study.

• Advances in materials Research
• /
• 제12권4호
• /
• pp.287-308
• /
• 2023

The main objective of this article is to highlight the progress made in the development of new materials that have been gradually used by humans until today. Of course, this progress must be associated with other parameters in order to guarantee sustainable development. For this, today, it has become urgent to reduce the consumption of cement by resorting to its partial or total replacement by other similar materials in order to reduce CO₂ emissions in our environment. This should certainly help to develop greener building materials. In this study, it was decided to proceed with the partial or total replacement of Portland cement type CEM II/B-L-42.5N by slate and lime that had not undergone any previous transformation. The results obtained revealed that the mortar whose substitution compared to the replacement of cement (100%) cement and sand (0/4) confers better kinetics than those of the series composed of(100%) cement and fraction rubble (0/1).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.51-60
• /
• 2006

At new constructing national road, a cutting slope was surveyed and gotten face mapping for three months. The slope is composed of gray phyllite and coaly slate which is the Chang-ri Formation, Okcheon system. The slope angle is 40 degree and the direction is NNE. The attitude of schistosity is $260^{\circ}/45^{\circ}$. So the slope direction is nearly parallel to the schistosity. This is the reason that the slope is very unstable. On the other hand, the very unstable slope is caused by the direction of the schistosity and the slope. First month the coaly slate was slided through the schistosity plane about 10cm. However, three months late the displacement was 2m maximum.

• 자원환경지질
• /
• 제2권3호
• /
• pp.47-57
• /
• 1969

The Yeonhwa Lead and Zinc Mine is located in northern part of Kyeongsang-Buk-Do, Korea, and is economically most important mine because it produces most part of the output of lead and zinc minerals in the country. Ore deposits of the mine are localized in the Pungchon Formation and several limestone seams of upper Myobong Formation in Cambrian Age. Ore solution ascended along the fractures of N-S, NE-SW or NW-SE trends and along slate and limestone boundary, and then replaced selectively limestone to make ore bodies. Skarn minerals are consisted of hedenbergite, diopside, and main sulfide mineral orebodies are composed of galena, zincblende, pyrrhotite, pyrite and a minor amounts of arsenopyrite and chalcopyrite. Metal ratio, ${\rho}_{Pb}={\frac{Pb(%)}{Pb(%)+Zn(%)}}{\times}100$, illustrates the zona I arrangements of some ore bodies. It will be inferred the flow trending of ore solution and the process reaction with adjacent country rocks. The sub-divided formations of the Pungchon limestone and Myobong slate are very useful as a criteria for detecting probable ore location. Rhodochrosite veins are good evidence for searching of ore location, especially on Pb-rich ore bodies.

• Design & Manufacturing
• /
• 제2권4호
• /
• pp.24-31
• /
• 2008

The productive products are required diversification of product development and advanced for competitiveness. A lot of methods to fix architecture wrapping panels and stone materials are developed in domestic area very much. In this paper, it is very important that a fixing device of slate and molds were developed to reduce the production cost and improve safety. Therefore new model was suggested to reduce manufacturing cost and structure design and FEM analysis were performed to manufacture die press dies for mass production.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.35.2-35
• /
• 2001

This paper is concerned with the problem of how to detect paint type defects on painted slates using machine vision. We begin by outlining the motivations for this research and present a review of research in related areas before proceeding with a process description and a categorization of typical paint defects. We describe the test bed built to replicate factory conditions and the testing of image capture techniques. We discuss problems we confronted such as getting a sufficiently strong signal level from the slate, the effects of the slate surface profile on image capture and how we dealt with these problems. The third principal challenge was to generate a strong signal to noise ratio for each defect type so that a computationally inexpensive image processing method becomes viable. We demonstrate ...

• 자원환경지질
• /
• 제6권4호
• /
• pp.219-230
• /
• 1973

This paper reviews Professor O.J. Kim's work on "The stratigraphy and geologic structure of the Great Limestone Series in South Korea". Although he stated in his paper such as "very few geologists in Korea argue without confident evidences against the age and stratigraphy of the Great Limestone Series which have been rather well established previously in most parts of the regions", he disregarded the Jeongseon type of the Joseon (Chosen) System and modified the Yeongweol and the Pyeongchang types. According to his description, the Jeongseon type is not a different type and it is only due to structural repetition of the Hwajeol and Dumudong Formations of the Duwibong type and its Maggol Limestone. Also, he devided the Sambangsan Formation of the Yeongweol type into the east and west parts along the so-called Jeolgaesan fault, and they are correlated to the Hongjeom Series and Sesong Slate (Seison Slate) of Kobayashi, respectively. Furthermore he established newly Yeongweol type which includes the original Kobayashi's Yeongweol type and the Upper Limestone of the Pyeongchang type. Also, he pointed out that his newly established Yeongweol type is quite correlatable to the Duwibong type. The writer's opinion can be concluded that the Jeongseon type is not simply of structural repetition and structurely the Sambangsan Formation can not be devided into two parts. Also structurely there is no evidence of its correlation to the Sesong Slate as well as his conodont study in his Yeongweol type shows no indication of the correlation. The writer thinks that as to the stratigraphy of the Yeongweol and Jeongseon types of the Joseon System, it should be agreed with the Kobayashi's opinion or should be followed the idea of the very few geologists, he mentioned.

• 한국환경과학회지
• /
• 제22권12호
• /
• pp.1579-1587
• /
• 2013

This study was performed to evaluate the asbestos exposure levels and to calculate excess lifetime cancer risk (ELCR) for the risk assessment of the asbestos fibers released from asbestos-cement slate roofing (ASR) building. Total number of ASR buildings was into 21,267 in Busan, and 82.03 percent of the buildings was residential houses, and 43.61 percent of the buildings was constructed in 1970s. For this study, ten buildings were selected randomly among the ASR buildings. The range of airborne asbestos concentration in the selected ten ASR buildings was from 0.0016 to 0.0067 f/mL, and the concentration around no-admitted ASR buildings was higher than that around admitted buildings. The ELCR based on US EPA IRIS (integrated risk information system) model is within 3.5E-05 ~ 1.5E-04 levels, and the ELCR of no-admitted ASR buildings was higher than 1.0E-04 (one person per million) level that is considered a more aggressive approach to mitigate risk. These results indicate that the cancer risk from ASR buildings is higher than other buildings, and systematic public management is required for control of no-admitted ASR buildings within near future.

• 자원환경지질
• /
• 제30권6호
• /
• pp.567-586
• /
• 1997

Concentrations of several heavy metals in soils derived from black shale and slate have been reported to be higher than the average concentrations in non-polluted soils. This study describes and characterizes soil minerals, and investigates the distribution of heavy metals in soils, and then examines their relationship. Soils in the study area are mainly consist of guartz and feldspars with minor amount of kaolin, illite, vermiculite, chlorite and illite-vermiculite interstratified minerals. Mineral compositions are similar in mountain-, farmland-, and paddy-soils. The residual soils derived from sandy phyllites contain less illites than those from black shale and black slate. Heavy metals appear to be more concentrated in soils than in rocks. The concentrate ratios in soils to rocks ranges 1.1 times for Cr, 2 for Cu, 1.4 for Ni. The contour maps of Cd, Zn, Pb, Cu contents using 0.43N $HNO_3$-extraction imply that these elements are highly concentrated in the soils near the past uranium exploration region, coal seams, black slate beds and tailings than other parts of the study area. The proportions of the day in most soils are less than 10%. In spite of small proportions of the clay, the concentrations of heavy metals from clay fractions to the total concentrations are high: 1~2.4 times for Co, 1.4~2.5 for Cu, 1.2~2.6 for Ni, 1~5 for Pb, 1~2.7 for Zn and 1.6~1.8 for Cr and V. The contents of organic carbons in clay fractions are also 1.5~3.9 times higher than in silt and sand fractions. Cu, Pb and organic carbons show positive relationship in all size fractions. In the size-fractionated soil profile samples, the contents of heavy metals and organic carbons show analogous trends with depth. For the clay fractions of soil profile samples, the contents of heavy metals with depth have analogous trends to abundances of vermiculites, which have the high CEC in main clay minerals.

• 한국산업보건학회지
• /
• 제24권4호
• /
• pp.492-500
• /
• 2014

Objectives: The purpose of this study is to estimate the applicability of regional sample collection of environmental samples. The concentration of asbestos fibers were analyzed with two devices. One was an existing commercial air sampling pump that has been proved to be accurate and exact, and the other is a remodeled pump for sample collection which was made from an electric bubble generator originally designed for aquarium fish. Samples were collected with the two devices under the same environmental conditions and collection equipment. A comparative analysis of the concentration of ambient asbestos fiber was then performed. Methods: Based on previous research, six farmhouses with asbestos fiber slate roofs known to have high concentrations of asbestos fiber were selected. Using the existing commercial air sampling pump and the remodeled electric bubble generator, four to seven samples were collected each day one meter downwind from the edge of the slate roof at high volume (about 4 L/min) and low volume (about 1.4 L/min). The analyzer responsible for sample quality control of asbestos fibers counted the number of asbestos fibers with a phase microscope. Results: The rates of flow change of the existed sampler and the remodeled pump at high volume were 0.82% and 0.17%, respectively. The rates of flow change at low volume were 3.83% and 1.09%, but there was not significant difference. The rates of flow change are within the error range (${\pm}5%$) of OSHA analyzing methods. For the high volume sampler, the average asbestos fiber concentration in the air collected by the existed sampler is 6.270 fibers/L and for the remodeled one 5.527 fibers/L, not a significant difference. For the low volume sampler, the average asbestos fiber concentration in the air collected by the existed sampler is 7.755 fibers/L and for the remodeled one 7.706 fibers/L, not a significant difference. The total area of the slate roof of the targeted farmhouse has an effect on the concentration of asbestos fibers in the air from the existing pump and the remodeled one (p<0.01). Conclusions: The sampling function between the existing commercial pump and the remodeled one shows little difference. Therefore, the remodeled pump is considered a pump with a good availability for collecting ambient air asbestos samples.