• 대한조선학회논문집
• /
• 제55권3호
• /
• pp.187-195
• /
• 2018

Ship's bottom slamming has been studied by many researchers for a very long time. But still some ships suffer structure damages caused by the bottom slamming impacts. This paper presents a practical computation method of the design impact pressure due to ship's bow bottom slamming. Large heave and pitch motions of a rigid hull ship are simulated by the nonlinear strip method in time domain and the relative colliding velocity between the bow bottom and the water surface is calculated using the simulated ship motions. The bottom slamming impact pressure is calculated as a product of the relative colliding velocity squared and the bottom slamming pressure coefficient that is obtained by modification of the SNAME pressure coefficients based on Ochi's slamming experiments. Not only the bottom slamming pressures but also the required bottom plate thicknesses are calculated and compared with those of the classification society rules. The comparisons show good agreements and it is confirmed that the present method is practically very useful for the bottom structure design against ship's bow bottom slamming impacts.

• 선박안전
• /
• 통권31호
• /
• pp.60-70
• /
• 2011

The slamming impact pressures at the bottom area of the Open60' are evaluated by the rules and regulations of various organizations - ISO and classification societies. The enhanced performance of the modern racing yacht in terms of speed which achieves well over 20 knots needs special consideration. The calculated design impact pressures are compared a experimental results. Severe difference can be found in these calculation results but the final conclusion shall be obtained after the scantling calculation under the evaluated design impact pressure so far.

• 한국해양공학회지
• /
• 제21권1호
• /
• pp.40-44
• /
• 2007

This paper presents the experimental results on slamming phenomenon. The air pressure cylinder was used to ensure repeatability of the impact. The results showed that the adopted experimental technique was excellent in terms of repeatability, compared to that of the free drop tests. The pressure time histories, magnitude of peak pressure and the behavior of jetspray were obtained. The flat specimen was tested for various incident angles. To estimate the incident speed of the specimen, a high-speed camera was used. The high-speed camera was also a useful tool in understanding the behavior.

• 대한조선학회논문집
• /
• 제56권4호
• /
• pp.308-315
• /
• 2019

In this study, numerical simulations of slamming impact pressure acting on the flat plate and wedge type models using the cartesian-grid system and Modified Marker-Density Method (MMD method) were performed and the results were examined. The flat plate and wedge type models were selected as target objects, the turbulence characteristics were considered by applying the Sub-Grid Scale (SGS) turbulence model. Through this study, how the pressure acting on the target objects according to the incident angle influences the slamming impact pressure was examined and the results were compared with the flow characteristics of other experimental results. Also, the degree of slamming impact pressure is evaluated with respect to the cartesian-grid system and MMD method, which is easy to use and has a high degree of calculation for free surface.

• 수산해양기술연구
• /
• 제19권2호
• /
• pp.117-124
• /
• 1983

정면규칙파중에서 Bow-flare부 충격은 선저충격에 비해서 작용 시간이 길고, 선체 수직운동진폭이 큰 상태이거나, 파고가 큰 입사파가 적용되는 경우에 선체에 작용하는 충격력은 상당히 크며, 파고가 높아지면, 발생하는 모우멘트도 증가한다. 2. Bow-flare부가 큰 선형의 경우에는 선저노출이 일어나지 않더라도 부가질량의 급격한 증가에 따라 상당히 큰 충격력이 작용한다. 3. Deckwetness, 불규칙파중에서의 응답해석, 상대변위를 구할 때 Dynamic Swell-up의 양을 고려한 계산 등의 검토가 요망된다.

• 한국항해항만학회지
• /
• 제39권1호
• /
• pp.77-82
• /
• 2015

슬래밍은 선체가 파도와 부딪히며 선수, 선미에서 강한 충격압력을 받아 급격한 진동이 발생되는 현상이다. 이러한 슬래밍은 사람에게는 승선감의 불쾌감을 주고, 선체에는 구조적인 위험을 주며 화물의 안전과도 깊은 관계가 있다. 따라서 선박 설계기준에는 슬래밍에 의한 충격압력을 충분히 고려한 구조설계를 해야 한다. 본 연구에서는 자유낙하 하는 쐐기형 구조물의 중량 및 낙하높이의 변화에 따른 슬래밍 충격 압력 및 유동장의 유동특성을 알아보고자 실험을 수행하였다. 유동장의 계측은 2-프레임 그레이레벨 상호상관 PIV기법을 이용해 접수와 이수로 구분하여 실험하였으며, 충격압력의 계측은 압력계측장비인 Dewetron System을 이용하였다. 실험에서 모델과 자유수면간 이루는 각도는 $15^{\circ}$를 적용하였으며 이때, 중량의 변화는 1.5, 1.8 및 2.0kg이고 자유낙하높이는 100, 200 및 300mm로 하여 실험하였다. 실험값을 통한 중량의 변화에 따른 충격압력은 중량의 증가하는 것에 비례하여 충격압력 또한 증가했으며, 이러한 경향은 자유낙하 높이가 높을수록 영향을 많이 받았다.

• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.279-284
• /
• 2007

As a container vessel becomes larger, the bow flare becomes larger. The large bow flare structures are often subjected to dynamic pressure loads due to bow flare slamming occurring in rough seas. The aim of this paper is to investigate the characteristics of bow flare slamming pressure measured in a real voyage through the North Pacific Ocean. The characteristics of impact pressure load caused by slamming is addressed in terms of the pressure pulse-time history which involves rising time, peak pressure, decaying time and type of pressure decay. The values were presented using non-dimensional parameters.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.67-73
• /
• 2009

This study presents the results of a slamming experiment using a pneumatic cylinder. The employment of the pneumatic cylinder showed a relatively good repeatability when the results were compared with those of other slamming devices. The experiment was done for various incident angles. An air pocket was believed to cause a reduction in the magnitude of the impact pressure with an incident angle of $0^{\circ}$ for the water entry. A high speed camera was used in an attempt to locate the time of the contact between the bottom of the specimen and the free surface. It seemed that the maximum pressure occurred before the water contacted the bottom of the specimen.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.439-445
• /
• 2017

Plunging breaker slamming pressures on vertical or sloping sea dikes are one of the most severe and dangerous loads that sea dike structures can suffer. Many studies have investigated the impact forces caused by breaking waves for maritime structures including sea dikes and most predictions of the breaker forces are based on empirical or semi-empirical formulae calibrated from laboratory experiments. However, the wave breaking mechanism is complex and more research efforts are still needed to improve the accuracy in predicting breaker forces. This study proposes a semi-empirical formula, which is based on impulse-momentum relation, to calculate the slamming pressure due to plunging wave breaking on a sloping sea dike. Compared with some measured slamming pressure data in two literature, the calculation results by the new formula show reasonable agreements. Also, by analysing probability distribution function of wave heights, the proposed formula can be converted into a probabilistic expression form for convenience only.

• 한국해양공학회지
• /
• 제31권1호
• /
• pp.22-27
• /
• 2017

This paper presents the results of an experimental study on the wedge slamming impact problem, including the fluid-structure interaction. A free drop test was performed to estimate the hydroelasticity. Three wedges were fabricated of 5 mm thick steel plate. The deadrise angles were $15^{\circ}$, $20^{\circ}$, and $25^{\circ}$. Plate thicknesses of 2 mm and 3 mm were used to determine the effect of the structural rigidity. The drop heights were 25 cm, 50 cm, 75 cm, and 100 cm. The pressure on a rigid part of the wedge and strain of the elastic plate were measured at four different locations. The pressure was compared using the Wagner theory and generalized Wagner theory.