• 대한조선학회논문집
• /
• 제49권6호
• /
• pp.534-540
• /
• 2012

The global performance of various ships estimated by simplified formulae of classification societies is compared with the numerical results by a strip-theory-based whipping analysis program including slamming impact(USLAM). Heave acceleration, pitch angle and the vertical acceleration are compared and the effectiveness of simplified formulae is evaluated. Four different ship models are used for comparison study, which include S175, Flokstra, 6000TEU and 8100TEU container ships. In order to verify the numerical results, the vertical bending moment of S175 is compared with the results of ITTC workshop data.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권1호
• /
• pp.65-71
• /
• 2011

Seakeeping analysis has progressed from the linear frequency-domain 2D strip method to the nonlinear timedomain 3D panel method. Nevertheless, the violent free surface flows such as slamming and green water on deck are beyond the scope of traditional panel methods based on potential theory. Recently, Computational Fluid Dynamics (CFD) has become an attractive numerical tool that can effectively deal with the violent free surface flows. ABS, as a classification society, is putting forth a significant amount of effort to implement the CFD technology to the advanced strength assessment of modern commercial ships and high-speed naval craft. The main objective of this study is to validate the CFD technology as a seakeeping tool for ship design considering fully nonlinear three-dimensional slamming and green water on deck. The structural loads on a large container carrier were successfully calculated from the CFD analysis and validated with segmented model test measurements.

• 한국해양공학회지
• /
• 제21권1호
• /
• pp.40-44
• /
• 2007

This paper presents the experimental results on slamming phenomenon. The air pressure cylinder was used to ensure repeatability of the impact. The results showed that the adopted experimental technique was excellent in terms of repeatability, compared to that of the free drop tests. The pressure time histories, magnitude of peak pressure and the behavior of jetspray were obtained. The flat specimen was tested for various incident angles. To estimate the incident speed of the specimen, a high-speed camera was used. The high-speed camera was also a useful tool in understanding the behavior.

• 한국해양공학회지
• /
• 제29권2호
• /
• pp.163-168
• /
• 2015

This paper presents the results of experimental work on the wedge slamming impact problem. An experiment was done with a wedge model. The deadrise angle of the wedge was $4^{\circ}$. The model was made in two parts: the outside part was made of a 5-mm-thick steel plate that could be assumed to be a rigid body, and the inside part was made of a thin SUS plate that could be assumed to be an elastic body. Thin SUS plate thicknesses of 2 mm and 3 mm were used to determine the effect of plate rigidity. The drop height was varied from 0.25 m to 1 m to determine the effect of a large deformation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.518-530
• /
• 2020

The present study concerns the stern slamming load of container carriers, with stern bulb arrangement variation. First, a series of wedge drop tests were conducted using simple wedge models with fixed deadrise angles, and tests with the cross-section models of practical container carrier sterns were followed. The deadrise angle of the simple wedge ranged from 0° to 10°. The pressure measurement results of the simple wedge drop tests were distributed between empirical formula and analytic solution, so the experimental setup was validated. In the cases of practical hull cross-sections, the water entry of the bulb prior to that of the transom resulted in characteristic water film generation and delayed pressure peak appearance. The trapped air between the bulbs damped the pressure in the twin skeg hull case, reducing the pressure peak and causing the pressure oscillation during water entry.

• 한국항해항만학회지
• /
• 제39권1호
• /
• pp.77-82
• /
• 2015

슬래밍은 선체가 파도와 부딪히며 선수, 선미에서 강한 충격압력을 받아 급격한 진동이 발생되는 현상이다. 이러한 슬래밍은 사람에게는 승선감의 불쾌감을 주고, 선체에는 구조적인 위험을 주며 화물의 안전과도 깊은 관계가 있다. 따라서 선박 설계기준에는 슬래밍에 의한 충격압력을 충분히 고려한 구조설계를 해야 한다. 본 연구에서는 자유낙하 하는 쐐기형 구조물의 중량 및 낙하높이의 변화에 따른 슬래밍 충격 압력 및 유동장의 유동특성을 알아보고자 실험을 수행하였다. 유동장의 계측은 2-프레임 그레이레벨 상호상관 PIV기법을 이용해 접수와 이수로 구분하여 실험하였으며, 충격압력의 계측은 압력계측장비인 Dewetron System을 이용하였다. 실험에서 모델과 자유수면간 이루는 각도는 $15^{\circ}$를 적용하였으며 이때, 중량의 변화는 1.5, 1.8 및 2.0kg이고 자유낙하높이는 100, 200 및 300mm로 하여 실험하였다. 실험값을 통한 중량의 변화에 따른 충격압력은 중량의 증가하는 것에 비례하여 충격압력 또한 증가했으며, 이러한 경향은 자유낙하 높이가 높을수록 영향을 많이 받았다.

• 선박안전
• /
• 통권31호
• /
• pp.60-70
• /
• 2011

The slamming impact pressures at the bottom area of the Open60' are evaluated by the rules and regulations of various organizations - ISO and classification societies. The enhanced performance of the modern racing yacht in terms of speed which achieves well over 20 knots needs special consideration. The calculated design impact pressures are compared a experimental results. Severe difference can be found in these calculation results but the final conclusion shall be obtained after the scantling calculation under the evaluated design impact pressure so far.

• 수산해양기술연구
• /
• 제20권2호
• /
• pp.96-104
• /
• 1984

1. slam충격수 N(T)는 전부수선에서 거리가 증가할수록 감소하며, N(T)=1인 위치가 제한점으로 되며, 제한점이 되는 위치이후에서는 충격의 영향을 고려치 않아도 무방할 것으로 고려된다. 2. 충격력을 고려한 수직제한깊이는 계획흘수의 1/10로 잡았고, 충격응력에 대해서는 고려된 단면위치에서 압력작용속도의 상이로 인하여, 각각의 단면위치에서 전부선저의 몰입높이에 따라 각각 추정되어야한다. 3. 주어진 단면에 대한 충격력은 압력을 수직한계 높이까지 girth를 따라 계산함으로써 결정할 수 있다. 4. 최대충격력은 전부의 선저판의 형상에 따라 그 작용위치가 달라질 수도 있다. 5. 최대충격력의 약 50% 정도의 힘이 전부선저판의 충격에 소비됨으로, 이는 전부선저판의 적정치수 결정에 도움이 될 것으로 기대된다.

• Ocean Systems Engineering
• /
• 제7권3호
• /
• pp.299-318
• /
• 2017

The paper aims at illustrating several key issues and ongoing efforts for development of a reliable fully-Lagrangian particle-based solver for simulation of hydroelastic slamming. Fluid model is founded on the solution of Navier-Stokes along with continuity equations via an enhanced version of a projection-based particle method, namely, Moving Particle Semi-implicit (MPS) method. The fluid model is carefully coupled with a structure model on the basis of conservation of linear and angular momenta for an elastic solid. The developed coupled FSI (Fluid-Structure Interaction) solver is applied to simulations of high velocity impact of an elastic aluminum wedge and hydroelastic slammings of marine panels. Validations are made both qualitatively and quantitatively in terms of reproduced pressure as well as structure deformation. Several remaining challenges as well as important key issues are highlighted. At last, a recently developed multi-scale MPS method is incorporated in the developed FSI solver towards enhancement of its adaptivity.

• 대한조선학회논문집
• /
• 제45권5호
• /
• pp.477-486
• /
• 2008

Numerical analysis for slamming impact phenomena has been carried out when 2-dimensional wedge shaped structure with finite deadrise angles enter the free surface by using a commertial CFD code, FLUENT. Fluid is assumed incompressible and entry speed of the structure is kept constant. Geo-reconstruct scheme (or PLIC-VOF scheme) is used for the tracking of the deforming free surface. User defined function of 6 degrees of freedom motion and moving dynamic mesh option are used for the expression of the downward motion of the structure and deforming of unstructured meshes adjacent to the structure. The magnitude and the location of impact pressure and the total drag force which is the summation of pressures distributed at the bottom of the structure are analyzed. Results of the analysis show good agreement with the results of similarity solution, asymptotic solution and the solution of BEM.