• 한국지반공학회논문집
• /
• 제22권8호
• /
• pp.13-24
• /
• 2006

연약지반상에서 교대 뒷채움으로 인하여 측방이동이 발생된 교대에 대하여 현장조사를 수행하였다. 교대측방이동의 원인을 분석한 결과, 설계시 교대기초말뚝을 수동말뚝으로 고려하지 않고, 연약지반에 대한 개량이 충분히 이루어지지 않은 것으로 조사되었다. 교대측방이동에 대한 대책공법으로 파일슬래브 공법이 제안되었다. 이 공법은 교대배면의 성토하중을 말뚝을 통하여 지지층으로 전달함으로써 연약지반의 측방유동을 효과적으로 방지할 수 있다. 연약지반상 파일슬래브공법으로 보강된 교대의 거동을 조사하기 위하여 현장계측을 수행하였다. 현장계측결과 파일슬래브공법은 교대뒷채움으로 인한 측방이동에 대하여 효과적으로 저항하는 것으로 나타났으며, 뒷채움으로 인한 성토하중은 말뚝을 통하여 지지층으로 전달됨을 알 수 있다. 이를 통하여 파일슬래브공법의 교대측방이동에 대한 억지효과를 확인할 수 있으며, 적용된 설계법의 합리성을 검증할 수 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권5호
• /
• pp.160-170
• /
• 2007

본 연구는 교량의 경제성 평가를 통해 교량 가설시 유용한 정보를 제공하기 위해, RC Slab교를 대상으로 유지관리수준에 따른 교량의 LCC를 예측하여 절감비용을 예측하고자 하였다. 본 연구의 수행 결과를 정리하면 다음과 같다. (1) 사례교량 LCC 분석 모델을 제안하였다. (2) 교량의 유지관리수준을 현행과 필요로 구분하고, 분석기간은 80년, 실질할인율은 4.5%로 가정하여 사례대상 교량에 대한 유지관리수준별 LCC를 예측하였다. (3) 사례교량의 LCC 예측결과를 통하여 절감비용을 예측하고 경제적인 절감효과를 파악하였다.

• 콘크리트학회논문집
• /
• 제25권5호
• /
• pp.517-528
• /
• 2013

모듈러 기술은 자동차, 플랜트, 조선산업 분야에서 이미 오래전부터 적용해 오던 기술로, 최근 교량 분야에도 적용되고 있다. 모듈러교량은 부재별 세부설계 과정이 생략되고, 모듈별로 표준화 된다는 점에서 기존의 조립식교량과는 차별화 된다. 거더형식 프리캐스트 모듈러교량은 단순지지 교량 형식으로 개발되었으며, 다경간 교량에 적용할 경우 단순지지 교량 형식의 모듈러교량을 연속화하는 방법으로 적용할 수 있다. 거더형식 프리캐스트 모듈러교량의 연속화는 시공이 간편하고 급속시공에 적합한 연결슬래브를 적용하는 방법으로 이루어진다. 연결슬래브는 1950년부터 미국에서 RC 형식으로 사용되기 시작하였으며, 2000년대에는 ECC를 적용한 연결슬래브(ECC 연결슬래브)가 개발된 바 있다. 이 연구에서는 ECC에 비해 재연성이 좋고 경제적인 RC를 적용한 연결슬래브를 다경간 거더형식 프리캐스트 모듈러교량에 적용하였으며, 기존의 RC 형식 연결슬래브를 보완한 형태의 연결슬래브와 수정된 연결슬래브의 설계방법을 제안하였다. 제안된 연결슬래브 설계방법의 검증을 위하여 연결슬래브 바닥판 실험체를 제작하고 연결슬래브의 휨성능 및 균열 사용성 검증실험을 수행하였으며, 이후 실제 교량시스템을 모사한 실험체를 이용하여 200만회 피로성능 검증실험을 수행하였다.

• Computers and Concrete
• /
• 제23권5호
• /
• pp.329-334
• /
• 2019

Traffic flow capacity of some old road bridges is insufficient due to limited deck width. In such cases bridge deck widening is a common solution. For multi-girder reinforced concrete (RC) bridges it is possible to add steel-concrete composite girders as the new outermost girders. The deck widening may be combined with bridge strengthening thanks to thickening of the existing deck slab. Joint action of the existing and the added parts of such bridge span must be ensured. It refers especially to the horizontal plane at the interface of the existing slab and the added concrete layer as well as to the vertical planes at the external surfaces of the initially outermost girders where the added girders are connected to the existing bridge span. Since the distribution of the added concrete is non-uniform in the span cross-section the structure is particularly sensitive to the added concrete shrinkage. The shrinkage induces shear forces in the aforementioned planes. Widening of a 12 m long RC multi-girder bridge span is numerically analysed to assess the influence of the added concrete shrinkage. The analysis results show that: a) in the vertical plane of the connection of the added and the existing deck slab the longitudinal shear due to the shrinkage of the added concrete is comparable with the effect of live load, b) it is necessary to provide appropriate longitudinal reinforcement in the deck slab over the added girders due to tension induced by the shrinkage of the added concrete.

• Structural Engineering and Mechanics
• /
• 제8권1호
• /
• pp.85-102
• /
• 1999

With the advent of computer, the finite element method has become a most powerful numerical method for structural analysis. However, bridge designers are reluctant to use it in their designs because of its complex nature and its being time consuming in the preparation of the input data and analyzing the results. This paper describes the development of a computer based finite element model using the idea of eccentric beam elements for the analysis of slab-on-girder bridges. The proposed method is supported by a laboratory test using a reinforced concrete bridge model. Other bridge analytical schemes are also introduced and compared with the proposed method. The main aim of the comparison is to prove the effectiveness of the shell and eccentric beam modelling in the studies of lateral load distribution of slab-on-girder bridges. It is concluded that the proposed finite element method gives a closer to real idealization and its developed computer program, SHECAN, is also very simple to use. It is highly recommended to use it as an analytical tool for the design of slab-on-girder bridges.

• Structural Engineering and Mechanics
• /
• 제54권2호
• /
• pp.257-289
• /
• 2015

Shear connectors are generally used to link the slab and girders together in slab-on-girder bridge structures. Damage of shear connectors in such structures will result in shear slippage between the slab and girders, which significantly reduces the load-carrying capacity of the bridge. Because shear connectors are buried inside the structure, routine visual inspection is not able to detect conditions of shear connectors. A few methods have been proposed in the literature to detect the condition of shear connectors based on vibration measurements. This paper proposes a different dynamic condition assessment approach to identify the damage of shear connectors in slab-on-girder bridge structures based on power spectral density transmissibility (PSDT). PSDT formulates the relationship between the auto-spectral densities of two responses in the frequency domain. It can be used to identify shear connector conditions with or without reference data of the undamaged structure (or the baseline). Measured impact force and acceleration responses from hammer tests are analyzed to obtain the frequency response functions at sensor locations by experimental modal analysis. PSDT from the slab response to the girder response is derived with the obtained frequency response functions. PSDT vectors in the undamaged and damaged states can be compared to identify the damage of shear connectors. When the baseline is not available, as in most practical cases, PSDT vectors from the measured response at a reference sensor to those of the slab and girder in the damaged state can be used to detect the damage of shear connectors. Numerical and experimental studies on a concrete slab supported by two steel girders are conducted to investigate the accuracy and efficiency of the proposed approach. Identification results demonstrate that damages of shear connectors are identified accurately and efficiently with and without the baseline. The proposed method is also used to evaluate the conditions of shear connectors in a real composite bridge with in-field testing data.

• Structural Engineering and Mechanics
• /
• 제6권3호
• /
• pp.259-274
• /
• 1998

The test results from non-destructive and destructive field testing of a three-span deteriorated reinforced concrete slab bridge are used as a vehicle to examine the reliability of available tools for finite-element analysis of in-situ structures. Issues related to geometric modeling of members and connections, material models, and failure criteria are discussed. The results indicate that current material models and failure criteria are adequate, although lack of inelastic out-of-plane shear response in most nonlinear shell elements is a major shortcoming that needs to be resolved. With proper geometric modeling, it is possible to adequately correlate the measured global, regional, and local responses at all limit states. However, modeling of less understood mechanisms, such as slab-abutment connections, may need to be finalized through a system identification technique. In absence of the experimental data necessary for this purpose, upper and lower bounds of only global responses can be computed reliably. The studies reaffirm that success of finite-element models has to be assessed collectively with reference to all responses and not just a few global measurements.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.791-796
• /
• 2000

Purpose of this study is to analyze the characteristics and reinforcement effects of restored the RC bridge deck with small precast panel through static load tests and to provide the basic information for the damaged slab decks. In the tests for realizing movement of general RC bridge slabs, 6 samples are prepared and tested. All reinforced samples are restored with 1 or 2-layers precast panels by epoxy mortar. The movement of restored slabs is analyzed and compared with the behavior of non-restored slabs. In result of these tests, tension cracks due to bending moment are show, and after static load test there happens finally a punching shear failure, which is the general type of RC bridge failure. The tests show that restoration of the RC slab results in increasing of loading capacity about 30~50% an restoring panels are stick to slab and moving with slab under loading test.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권2호
• /
• pp.115-124
• /
• 2003

A prestressed concrete slab bridge is analyzed by the specially orthotropic laminates theory. Both the geometry and the material of the cross section of the slab are considered symmetrical with respect to the mid-surface so that the bending extension coupling stiffness, $B_{ij}=0$, and $D_{16}=D_{26}=0$. Each longitudinal and transverse steel layer is regarded as a lamina, and material constants of each lamina is calculated by the use of rule of mixture. This bridge with simple support is under uniformly distributed vertical and axial loads. In this paper, the finite difference method and the beam theory are used for analysis. The result of beam analysis is modified to obtain the solution of the plate analysis.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.998-1001
• /
• 2011

The concrete track on bridge should be designed to effectively cope with the behavior of the bridge superstructure. For this purpose, in general, shear keys are designed to be installed at a certain intervals on the bridge deck, and the track slab is cast on these shear keys to transfer the load induced by the relative displacement between track and bridge. In this study, to apply the precast concrete slab track on bridge, a shear key structure and its effective installation method are presented. Also, the structural behavior of this shear key has been evaluated by the laboratory mock-up test.