• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2122-2125
• /
• 2008

Because the reheating furnace consumes a large amount of energy to heat up the slabs, it is very important to find an optimal temperature patterns in the furnace for energy saving as well as uniform target temperature at the exit of the furnace. In this study, the temperature profiles in the slab are determined by solving the transient one-dimensional heat conduction equation in conjunction with boundary conditions with total heat exchange factors. The optimal temperature patterns are obtained to minimize the fuel consumption with satisfying the predetermined constraint conditions. The design optimization is performed by using a genetic algorithm and the optimal results are validated with results obtained from the PIDO tool, called as P.I.A.n.O.

• 콘크리트학회논문집
• /
• 제17권4호
• /
• pp.637-643
• /
• 2005

Reinforced concrete beams or slabs are often strengthened or repaired using polymer modified cement concrete Stresses can develop in the structure by ambient temperature changes because thermal coefficients of the repair material and the existing concrete are typically different. Especially, shear stress often causes debonding of the interface. In this study, a rational procedure was developed where anchors can be designed in strengthened or repaired concrete members to prevent debonding at the interface. The current design procedure considers thicknesses and elastic moduli of the repair material and existing concrete, ambient temperature change, length, and beam-vs.-slab action. The procedure is also applicable to stresses developed by differential drying shrinkage.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.773-776
• /
• 2004

The so-called Life Cycle Cost (LCC) analysis on reinforced concrete bridge can provide useful information for initial design and maintenance plan of the RC bridge. This paper proposes an LCC prediction equation and a sensitivity analysis method for RC bridges. An LCC equation for the RC bridge which includes initial investment cost, maintenance cost, and demolition cost was derived and verified from the data for design and construction of an RC slab bridge. In order to solve uncertainty problem on actual discount rate and material characteristics in the analysis of LCC of concrete bridges, a sensitivity analysis method on the LCC using the Monte Carlo simulation technique was suggested.

• 콘크리트학회논문집
• /
• 제27권2호
• /
• pp.185-193
• /
• 2015

인장강도 및 휨강도가 낮고 취성파괴의 특성을 가지는 일반적인 콘크리트의 단점을 극복하기 위하여 최근에는 압축강도가 180 MPa이상인 고성능 콘크리트에 강섬유를 혼입한 강섬유 보강 초고성능 콘크리트(UHPC)에 대한 연구가 활발히 진행되고 있다. UHPC 바닥판과 강재 거더를 이용하여 합성보를 구성할 때, UHPC 바닥판의 높은 강도와 강성으로 인하여 강재거더 상부 플랜지의 역할이 거의 불필요할 것으로 예상된다. 이러한 점을 착안하여 본 논문에서는 합성보 구성 시에 강재 거더의 상부플랜지를 없앤 역T형 거더를 적용하였다. 역T형 거더에 UHPC바닥판을 합성하여 합성보를 구성할 경우, 상부플랜지가 없는 이유로 전단연결재의 설치 위치가 상부플랜지 대신에 강재 거더 복부에 설치해야하는 문제점이 발생되며, 강재 복부에 설치되는 전단연결재에 대한 거동, 역T형 강거더 합성보의 휨거동 특성 등은 현재까지 실험 및 이론적으로 평가된 적이 거의 없는 실정인 이유로 이에 대한 연구가 절실하다. 이를 위하여 본 논문에서는 전단연결재 간격, 바닥판 두께 등을 변수로 하여 역T형 거더와 UHPC바닥판을 합성한 합성보를 8개 제작하여 전단연결재의 거동, 휨거동 특성 등을 파악하고자 하였다. 또한, 강섬유 보강 초고성능 콘크리트의 인장연화거동을 고려한 재료모델링 및 이를 적용한 보 부재 단면의 변형률 적합조건을 이용한 해석모델을 제안하였다. 실험결과 및 해석결과를 기준으로 볼 때, UHPC 콘크리트의 경우 전단연결재의 간격은 100 mm에서 바닥판 두께의 2~3배 사이로 규정함이 적절한 것으로 나타났다. 실험결과와 해석결과를 종합적으로 비교하면, 강섬유 보강 초고성능 콘크리트 합성보의 실험결과와 해석결과는 비교적 잘 일치하고 있으므로 재료 실험으로부터 산정된 인장연화곡선은 강섬유 보강 초고성능 콘크리트의 실제 거동을 합리적으로 반영한다고 판단된다. 따라서, 본 연구에서 제시한 인장연화거동 특성을 반영한 강섬유 보강 초고성능 콘크리트의 재료모델링 및 휨거동 해석기법은 적절하며, 제시기법에 의해 강섬유보강 초고성능 콘크리트 합성 부재의 휨 내력을 합리적으로 예측할 수 있을 것으로 예상된다.

• 콘크리트학회논문집
• /
• 제26권6호
• /
• pp.761-769
• /
• 2014

인장강도 및 휨강도가 낮고 취성파괴의 특성을 가지는 일반적인 콘크리트의 단점을 극복하기 위하여 최근에는 압축강도가 180 MPa이상인 고성능 콘크리트에 강섬유를 혼입한 강섬유 보강 초고성능 콘크리트(UHPC)에 대한 연구가 활발히 진행되고 있다. UHPC 바닥판과 강재 거더를 이용하여 합성보를 구성할 때, UHPC 바닥판의 높은 강도와 강성으로 인하여 강재거더 상부 플랜지의 역할이 거의 불필요할 것으로 예상된다. 이러한 점을 착안하여 본 논문에서는 합성보 구성 시에 강재 거더의 상부플랜지를 없앤 역T형 거더를 적용하였다. 역T형 거더에 UHPC바닥판을 합성하여 합성보를 구성할 경우, 상부플랜지가 없는 이유로 전단연결재의 설치 위치가 상부플랜지 대신에 강재 거더 복부에 설치해야하는 문제점이 발생되며, 강재 복부에 설치되는 전단연결재에 대한 거동, 역T형 강거더 합성보의 휨거동 특성 등은 현재까지 실험 및 이론적으로 평가된 적이 거의 없는 실정인 이유로 이에 대한 연구가 절실하다. 이를 위하여 본 논문에서는 전단연결재 간격, 바닥판 두께 등을 변수로 하여 역T형 거더와 UHPC바닥판을 합성한 합성보를 8개 제작하여 전단연결재의 거동, 휨거동 특성 등을 파악하고자 하였다. 실험결과를 기준으로 볼 때, 향후 UHPC의 경우 스터의 간격은 100 mm에서 바닥판 두께의 2~3 배 사이로 규정함이 적절할 것으로 예상된다. 또한 실험 부재의 특성 상대변위는 Eurocode-4의 연성거동 기준에 의하면 충분한 연성 거동을 하는 것으로 판정되었으며, 바닥판이 지나치게 얇고 전단연결재의 간격이 지나치게 넓은 경우를 제외한 대부분의 부재들은 일반 콘크리트보다 UHPC의 성능이 우수하여 기존의 AASHTO LRFD 및 Eurocode-4의 식과 실험결과간의 차이가 있음을 알 수 있다.

• 한국농공학회지
• /
• 제30권3호
• /
• pp.82-94
• /
• 1988

A growing attention has been paid to the optimum design of structures in recent years. Most studies on the optimum design of reinforced concrete structures has been mainly focussed to the design of structural members such as beams, slabs and columns, and there exist few studies that deal with the optimum design of large-scale concrete shell structures. The purpose of the present investigation is, therefore, to set up an efficient optimum design method for the large-scale reinforced concrete cylindrical shell structures like intake tower of reservoir. The major design variables are the dimensions and steel areas of each member of structures. The construction cost which is compo8ed of the concrete, steel, and form work costs, respectively, is taken as the objective function. The constraint equations for the design of intake-tower are derived on the basis of strength design method. The results obtained are summarized as follows 1. The efficient optimlzation algorithrns which can execute the automatic optimum design of reinforced concrete intake tower based on the strength design method were developed. 2. Since the objective function and design variables were converged to their optimum values within the first or second iteration, the optimization algorithms developed in this study seem to be efficient and stable. 3. When using the strength design method, the construction cost could be saved about 9% compared with working stress design method. Therefore, the reliability of algorithm was proved. 4. The difference in construction cost between the optimum designs with substructures and with entire structure was found to be small and thus the optimum design with substructures may conveniently be used in practical design. 5. The major active constraints of each structural member were found to be the 'bending moment constraint for slab, the minimum longitudinal steel ratio constraint for tower body and the shearing force, bending moment and maximum eccentricity constraints for footing, respectively. 6. The computer program developed in the present study can be effectively used even by an uneiperienced designer for the optimum design of reinforced concrete intake-tower on the basis of strength design method.

• 한국주거학회논문집
• /
• 제16권4호
• /
• pp.17-28
• /
• 2005

The purpose of this study was to find out the residents' needs fur rural houses and to suggest the policy directions for developing Korean rural viewscape houses. The subjects were 386 houses and residents. They were selected according to accessibility, area characteristics, administrative district, and village types. The data were collected by using the interview and observation method based on the questionnaire. By analyzing the residents' needs for rural houses, the following conclusions were derived: 1) In order to preserve the rural characteristic, the government should lead to establish the yard space and the exterior design factors such as wall material and color, and the shape, material, and color of roof. 2) At the same time, the government should provide the residents with the subsidy for house improvement, so that they can build the desirabe size of house and the aged remodel their houses. 3) The contemporary design model of rural Han-ok should be developed and built. 4) The new rural house model improving roof design should be developed, because present houses with slab roofs and skirt roofs spoil the harmony with the rural natural environment. 5) The direction of rural houses for viewscape was defined as to satisfy residents' needs for convenient housing lift and to harmony visual and physical factors - building form, material and color - involving Korean rural housing culture.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2005년도 추계학술대회 논문집
• /
• pp.157-162
• /
• 2005

It is necessary for us to research and analyze of Open Housing in order to change new housing system, because exiting multi family housing is lack of flexibility and easy remodeling. The purpose of this study is to supply and grasp basic planning and design data for flexibility of Open Housings in Korea. This study is based on the literature survey and actual investigation through visiting 17 open housing sites from 1995 to 2005 in Netherlands, Finland and Japan, which are main Open Housing. We analyzed the planning methods and elements for flexibility of open housing block and unit plan, and described the contents of analyses. We found a lot of planning and design methods-supplying option plan and user participation before occupation, various structural system for openness, common piping shaft location, slab-down and applying access flooring system, movable and demountable partition wall system etc. -applied to the open housings, and findings are applicable to the planning and designing works of apartment housings in Korea.

• 한국산학기술학회논문지
• /
• 제11권7호
• /
• pp.2702-2707
• /
• 2010

본 논문에서는 신형식 강합성 교량에 대한 3차원 유한요소해석을 ABAQUS를 이용하여 실시하여, 연석 사하 중 재하에 따른 하중분배값을 검토하였다. 하중분배계수 검토에 고려된 변수로는 콘크리트 슬래브 두께, 강판 두께, 주형길이가 적용되었다. 해석을 통해 얻어진 하중 분배율은 AASHTO Standard와 AASHTO LRFD 설계기준의 제안식 및 기존 연구자들이 제안한 식들과 비교 검토되었다. 본 논문에서는 신형식 강합성 교량의 설계 간편성을 고려하여 외측주형의 경우 0.67, 내측주형의 경우 0.34의 하중분배율을 제안하였다.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.564-567
• /
• 2015

The incorporation of sustainability principles into the structural engineering design of buildings is increasingly important. Historically the focus of improvements to the environmental performance of structures has been operational energy considerations. Current research has highlighted the requirement for changing the approach by increasing the consideration of embodied energy in structures. This research was conducted to build on previous research by the authors in quantifying the contribution of column optimization to the embodied energy performance of concrete framed buildings. Ultimately, the authors intend to develop mechanisms through which sustainable design can be quantified, enabling alleviation prior to construction. Columns are a key structural element to consider as part of this development process. The outcomes of this assessment reinforced previous findings, observing that reduced structural weight as a result of other sustainable design measures carries manifold benefits include column design savings. Through the quantification of the embodied energy outcomes during this research phase, the columns were shown to contribute up to 19.71% of the total embodied energy of the structural system dependent upon construction technique used.