• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.447-448
• /
• 2010

본 연구는 조립식 포장 공법에서 사용할 고성능 프리캐스트 콘크리트 슬래브의 제작 가능성을 분석하기 위해 수행되었다. 세부요소기술을 포함하여 슬래브를 설계하였으며 이를 토대로 매우 우수한 프리캐스트 슬래브의 제작이 가능하였다.

• 대한전자공학회논문지
• /
• 제24권6호
• /
• pp.1025-1033
• /
• 1987

This paper describes the development of a new type of an integrated optical adjustable attenuator using magneto-optic effects in 4-layer slab waveguide. The characteristics of the proposed structure are analyzed and evaluated. Furthermore, the fabrication method and attenuation characteristics have been tested by experimets, therby confirming qualitatively the validity of the design theory.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.761-768
• /
• 1997

Recently, on account of the lack of skilled labor and the increase of labor costs, it has been more difficult the construction environment. Now new methods were developed and used many places. This study is concerning the structural performance of Composite Form Panel Method-one of the new methods-of the wall type. It is available to make monolithic system of bearing wall and half slab. This paper presented design and product data by experiments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.177-180
• /
• 2001

A decoupled, wide-band, perfectly magnetically conductor(PMC)-backed air waveguide antenna is designed and constructed for the use of the continuous electromagnetic wave ground penetrating radar in the frequency range from 200MHz to 600MHz. Two planar dipoles are located inside air slab covered by PMC on the top side and separated by an air gap from the bottom ground interface. The coupling between the transmitting and the receiving dipoles is calculated by less than -60dB over the frequency from 200MHz to 600MHz.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.161-164
• /
• 2001

본 논문에서는 주어진 주파수대역에서 우수한 원편파 특성을 가지고 광대역에서 저반사 손실을 가지는 이종대역 안테나 피드용 원형도파관 유전체 편파기의 설계기법을 제시하였다. 양호한 편파특성을 위한 유전체판 두께와 원형 도판관 직경의 결정방법을 제시하였다. 또한 이종 대역 안테나 피드용으로 광대역에서 저반사 손실을 가지기 위한 유전체 형상 설계기법을 제시하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.327-327
• /
• 2000

Derivation of a slab dimension from the desired tolerance degrades the product quality, resulting in significant yield loss by trimming. This necessitates the dimensional control system to be operated in tighter dimensional accuracy. This paper presents an integral approach to a dimensional control system design taking into account the interaction between the edging process and the gap rolling process. To investigate the effects of each process controller, a simple PID controller is adopted as a preliminary study. The control performance is analyzed in detail in terms of the system response accuracy for various operating conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.760-765
• /
• 2003

This study is performed in order to determine a method to solve vibration-borne problems by isolating the vibration that is generated by vehicles in case a road passes through a building and also to verify its applicability and effect both theoretically and experimentally.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.258-264
• /
• 1999

In this study, a computer program was developed for analysis of the orthotropic curved ring sector plates. In the developing program , the thin-plate theory and multi-base coordinate system was adopted. The effect of design factors-boundary conditions, loading conditions, steel ratio, open angle, radius of curvature and relative flexural rigidity between slab and edge-beam-on the behavior of the circular ring sector plates were discussed. Also, the practical limitations was proposed to replace the problem of the orthotropic sector plate by equivalent rectangular plage.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.839-844
• /
• 2000

The research was conducted to investigate the effects of intermediate diaphragm in concrete girder bridge. The analytical variables consisted of various types(reinforced concrete and steel) and locations of intermediate diaphragm, slab thickness, girder spacing etc. Finite element analyses of the bridge model assuming simply support condition. The Vertical load distribution was determined to be essentially independent of type and location of intermediate diaphragms. Also, it is found that the practical design of intermediate diaphragm may be revised.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.138-139
• /
• 2012

본 논문에서는 고주파 공진형 인버터 접속의 가열 코일로부터 비접촉 상태로 전자유도 와전류를 구조물에 가하여 발열하는 공진형 인버터를 이용한 유도가열 방식의 최적설계를 제안하였다. 설계한 시스템 인버터는 스위칭주파수 20[kHz] 대역에서 동작하는 하프-브리지 고주파 직렬 부하 공진형이며 LC공진 설계 시 부하 자체를 L로 설정하여 효율을 최대화 하였다. 또한 유도가열용 인버터에 적용 가능한 스너버회로의 특성분석을 통해 본 시스템의 최적화에 관한 연구를 하였다.