• Food Science of Animal Resources
• /
• v.38 no.1
• /
• pp.162-171
• /
• 2018

The purpose of this study was to investigate the quality of duck ham formulated with duck skin through the pre-emulsification process. The experiments to investigate the quality characteristics of duck ham were carried out to measure proximate composition, cooking loss, emulsion stability, pH, color, texture profile analysis, apparent viscosity, and sensory characteristics. Duck ham was prepared with various ratios of duck skin in pre-emulsion as follows: Control (duct skin 30%), T1 (duck skin 20% + pre-emulsified duck skin 10%), T2 (duck skin 15% + pre-emulsified duck skin 15%), T3 (duck skin 10% + pre-emulsified duck skin 20%), and T4 (pre-emulsified duck skin 30%). As the ratio of duck skin to pre-emulsified skin changed, the quality of duck ham in terms of moisture content, fat content, cooking loss, emulsion stability, lightness, textural analysis, apparent viscosity, and overall acceptability changed. The moisture content of T2 was the highest (p<0.05) and that of the control and T4 was the lowest (p<0.05). The fat content of control was higher than all treatments (p<0.05). T2 had the lowest values in cooking loss, total expressible fluid, fat separation, hardness, springiness, and gumminess (p<0.05). The score of overall acceptability of all treatments with pre-emulsified skin was higher than control (p<0.05). Therefore, the pre-emulsification process can improve the quality characteristics of duck ham and 1:1 ratio of duck skin and pre-emulsified skin was the proper ratio to improve the quality characteristics of duck ham.

• Archives of Plastic Surgery
• /
• v.42 no.3
• /
• pp.282-287
• /
• 2015

Background Morphological changes that accompany aging, such as wrinkles and skin laxity, are particularly prominent on facial skin. Recently, facial rejuvenation using the hydrofilling effect of hyaluronic acid (HA) filler has been employed for improvement of skin texture. In this study, we studied rejuvenating effects of stabilized HA (Restylane Vital) through direct intradermal injections. Methods A total of 30 female patients underwent a series of procedures on face, including three sessions at intervals of four weeks. A total of 2 mL of Restylane Vital was injected along the whole face using an automatic injector. Improvement of skin surface roughness, elasticity, brightness, moisture, and fine wrinkles was evaluated. Patient satisfaction was evaluated, and pictures of patients were taken at each visit and 6 months after last treatment session. Scoring for each patient was performed by three doctors according in five subjects. Moisture, oil and elasticity were measured before the procedure and before the last treatment in 10 patients. Results The majority of patients (77%) were satisfied with the therapeutic outcomes. Approximately 66% of patients responded that the effects of this procedure persisted for longer than four months, and the majority of patients (77%) wanted to undergo this procedure again and would recommend this procedure to acquaintances. Regarding doctors' evaluation, scores for improvement of skin surface roughness, elasticity, and brightness were significantly higher than those for improvement of moisture and fine wrinkle. Conclusions Intradermal injection of HA can have a rejuvenating effect on dry and tired facial skin, especially in improvement of skin surface roughness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.373-381
• /
• 2016

To investigate the influence of hand cream of domestic and foreign brands on the purchase tendency, a survey was conducted on hand cream application, purchase tendency, and perception of 105 women in a metropolitan area. Market research was then conducted to compare the hand cream cost, quantity, and total substance, and the hand creams were sorted according to high-price and low-price, and foreign brand and domestic brand, and a clinical demonstration was conducted by back-hand application on 17 recipients to analyze the moisture and skin oil differences and the moisture endurance. As a result, the percentage of subjects who perceived that the price and brand of hand cream affects the quality was higher than those who did not, and the hand cream prize per 1mg (g) varied as much as fourfold among the high-price and low-price, and among foreign and domestic brands. The result of the total substance comparison, glycerin the moisturizer and cetearyl alcohol the skin conditioner were included in all hand creams. As a result of the clinical demonstration, the difference in moisture and skin oil difference and moisture endurance between the high-price and low-price and foreign brand did not show a statistically significant difference. These results show that there are no relationships between skin moisture and sebeum of the brand. Therefore, considering that hand cream is a highly consumptive product that is used multiple times on a daily basis, these results might provide fundamental data that could contribute to the increase in hand cream product quality by determining the consumers' needs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.1
• /
• pp.115-126
• /
• 2001

In this paper, through a series of comparative experiments, effects of two different cure processing methods, cocure and precure, on the mechanical properties of honeycomb core materials for aircraft applications are considered. Mass of moisture accumulated into the closed cells of the sandwich panel specimen from the measured mass of moisture diffused to the full saturation state into the elements(skin, adhesive layer, Nomex honeycomb), consisting the honeycomb sandwich specimen has been calculated. Water reservoir of 70$\^{C}$ was used to have specimens absorb moisture to see the influence of moisture absorbed into sandwich panel on its mechanical properties. For the repair condition holding for 2 hours at 177$\^{C}$(350℉) temperature, a pressure due to the vapor expansion in each cell of the sandwich panel, which may result in the local separation of the interface between laminated skin and the surface of the honeycomb, has been estimated by vapor pressure-temperature relation from the thermodynamic steam table and compared to the pressure from the ideal gas state equation. The bonding strengths of the laminated skins on the flat surface of the Nomex honeycomb have been compared by the flatwise tension test and climbing drum peel test performed at room temperature for dry, wet and wet-repair specimens, respectively.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.15 no.1
• /
• pp.63-70
• /
• 1989

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.3 s.52
• /
• pp.279-283
• /
• 2005

The content of lipid or moisture and index of erythema or melanin on each facial part of 170 urban middle-aged women without dermic disease was measured by non-invasive method. This measurement intended to understand the skin condition on each facial part of middle-aged women, and to determine the correlation between objective measured values and subjective symptom of lipid content/moisture content. The results was summarized as follows. At each facial Part, the order of moisture content was eye rims, forehead, and cheek and that of lipid content was forehead, eye rims, and cheek. The erythema index was in the order oi forehead, cheek and eye rims and melanin index, in the order of eye rims, forehead and cheek. It turned out that the middle-aged women generally lacked lipid content rather than moisture one. The objective measured values of lipid content coincided with subjective symptom of lipid type. The lipid content, erythema index and melanin index showed correlation significantly.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.27 no.1
• /
• pp.83-98
• /
• 2001

Inositol, is a water-soluble crystalline compound. It helps with people’s metabolism and decreases cholesterol levels. It is also known to have anti-cancer results. In order to find out the affects of Inositol on the skin, Inositol skin lotion was produced with each amount of Inisitol: 0, 0.5, 1.0, 2.0, 3.0 wt% and tested on the faces and the arm areas of women in all ages for 7 weeks. The moisture, sebum, change in elasticity, and improvement of wrinkles were measured. Corneometer, Sebumeter, Cutometer, and an image analyzer were used as measuring equipments. There are subtle differences in the subjects when 1-2% of Inositol is used the moisture of the skin improved 19%, elasticity by 17%, and the amount of sebum for dry and oily skin types adjusted to the amount of sebum of the neutral skin types. This influenced the length, width, the number of peak, and the height of the wrinkles to improve 12.4%. It is thought that Inositol would be an effective new raw material in cosmetics.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.10
• /
• pp.703-711
• /
• 2017

Today, men's appearance is an important part of the global fashion industry, including Korea, with such fashion concepts as the Metrosexual and Ubersexual. Domestic and overseas beauty and cosmetics related organizations are using this phenomenon for marketing and researching to improve the function of cosmetics. The purpose of this study was to investigate the effect of Prunus persica L. Batsch leaf extract on the skin condition after clinical application to male subjects with oily skin to determine the possibility of functional cosmetics utilizing this extract. The cleansing bars were prepared by the MP method and the cleansing packs were prepared using natural ingredients. After 8 weeks of application, moisture, oil, erythema, melanin, pH, elasticity and tactile sensation were measured using MPA5. The results showed that there was a statistically significant difference in T-zone moisture and T-zone oil after using the natural cleansing bar, but there was no significant difference between the two groups for other items. However, the statistically significant changes were found in the individual skin condition change items of the subjects in each group, and it was judged that the two kinds of formulations could be used at the same time to have a higher skin improvement effect. Thus, Prunus persica L. Batsch leaf extract demonstrates potential to be used as a functional cosmetics item.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.3
• /
• pp.197-200
• /
• 2012

To develop lipstick products with superior moisturizing effect using moisture base, bound water capacity and water holding capacity were investigated by DSC. Bound water capacity of the lipstick sample excluding moisture base is found to be 5.12 %. DSC measurement showed that bound water capacity and the concentration of moisture base were positively correlated. Additionally, DSC measurements and in vitro effective water holding capacity measurement showed similar patterns. Therefore, measuring of bound water capacity by DSC can predict the moisturizing effect of lipstick products.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.571-575
• /
• 1995

Transition temperature$(T_m)$ and $enthalpy({\Delta}H)$ were examined by means of DSC to obtain basic information on heat stability of skin tissue collagen. From DSC properties of insoluble collagen on hydration time and moisture content, it was found that moisture content had more effect on structural stability of collagen than hydration time. As moisture content increased, $({\Delta}H)$ increased while $(T_m)$ decreased. DSC properties of acetone dried skin on the variation of age and sex showed higher heat stability in case of male rat and heat stability seemed to be connected with age, as $(T_m)$ and $({\Delta}H)$increased with age. Meanwhile, DSC properties of salt soluble collagen showed higher values in female rat than in male rat, and the $(T_m)$ and $({\Delta}H)$ decreased significantly with age in female rat. These results seemed to suggest indirectly that collagen structure varied with age or sex in the same tissue.