• 한국전기전자재료학회논문지
• /
• 제21권8호
• /
• pp.776-781
• /
• 2008

In this study, ubiquitous health care system attaching in chair to monitor ECG for health care was developed at the unconsciousness state. The system conveniently and simple measured ECG at non-consciousness. We measured the contact impedance to skin-electrode of metal mesh electrodes of the system. Contact impedance enable the electrode to use for ECG measurement. The results are that the impedance of the metal mesh electrodes according to sizes is low when the size is 4$cm^2$. As the result, when the size of the metal mesh electrode is 4$cm^2$, the electrode is fit for ECG measurement. We can acquired by positing the arm on the metal mesh electrode. The ECG signal was detected using a high-input-impedance bio-amplifier, and then passed filter circuitry. The measured signal transmitted to a PC through the bluetooth wireless communication and monitored. Data of the non-constrained ECG system attaching in chair is noise-data when comparing metal mesh electrode with the Ag/Agcl electrode but the data is significant to monitor ECG for check the body state.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.295-298
• /
• 2004

Automobile door-handle is assembled with three parts that are base, skin and cover. Over-molding processing makes assembly of the base and skin. The skin part that was made by PVC polymer has various thickness. Plastic injection molding simulation of part including significant changed thickness as skin is an inaccuracy comparing with real injection molding. To solve this problem, two commercial flow prediction software that are Moldflow MPI and MAPS 3D were used in this study. Simulations were conducted for three types mesh. Taguchi method was applied for simulation experiments. It will be need to compare with simulation results and real over-molding behavior in the near future.

• 한국정밀공학회지
• /
• 제30권10호
• /
• pp.1061-1068
• /
• 2013

In this research, the design optimization of a composite sandwich has been performed for using as an airplane wing skin. Automated analysis framework for aero-structure interaction is used for calculating load data on the wing. For automated analysis framework, FLUENT is used for computational fluid dynamics (CFD) analysis. CFD mesh is generated automatically by using parametric modeling of CATIA and GAMBIT. A computational structure mechanics (CSM) mesh is generated automatically by the parametric method of the CATIA and visual basic script of NASTRAN-FX. The structure is analyzed by ABAQUS. Composite sandwich optimization is performed by NASTRAN SOL200. Design variables are thicknesses of the sandwich core and composite skin panel plies. The objective is to minimize the weight of the wing and constraints are applied for wing tip displacement, global failure index and local failure indexes.

• 한국항공운항학회지
• /
• 제21권2호
• /
• pp.7-14
• /
• 2013

In this paper, the optimal design of composite rotor blade cross-section is performed using a genetic algorithm. Skin thickness, torsion box thickness and skin lay-up angle are adopted as discrete design variables. The position and width of a torsion box are considered as continuous variables. An object function of optimal design is to minimize the mass of a rotor blade, and constraints are failure index, center mass, natural frequency and blade minimum mass per unit length. Finally, design variables such as the thickness and lay-up angles of a skin, and the thickness, position and width of a torsion box are determined by using an in-house program developed for the optimal design of rotor blade cross-section.

• 항공우주시스템공학회지
• /
• 제8권1호
• /
• pp.12-17
• /
• 2014

In this paper, optimal design of composite rotor blade cross-section to consider manufacturability was performed. Skin thickness, torsion box thickness and skin lay-up angle were adopted as discrete design variables and The position and width of a torsion box were considered as continuous variables. An object function of optimal design is to minimize the mass of a rotor blade, and various constraints such as failure index, center mass, shear center, natural frequency and blade minimum mass per unit length were adopted. Finally, design variables such as the thickness and lay-up angles of a skin, and the thickness, position and width of a torsion box were determined by using an in-house program developed for the optimal design of rotor blade cross-section.

• 생약학회지
• /
• 제33권4호통권131호
• /
• pp.364-371
• /
• 2002

Yew (Taxus cuspidata Sibe) selected cultivation as drug, food and decorative plant in Gyong-gi province in Korea. To extract the water soluble active ingredients, as a extracting method, there was extracted with 20g of dried seeds with each 20g of butylene glycol(BG) and propylene glycol(PG), and 40 mL of water mixing 72 hours at $40{\pm}5^{\circ}C$, and then they were filtrated by 400 mesh. Appearance of extract of seeds was pale brown, $pH=4.5{\pm}0.5$, $gravity=1.013{\pm}0.05$, a reflective $index=1.373{\pm}0.05$, and yield=75%. Also, to extract the high purity oil from seeds, it minutely pulverized the dried seeds and added the hexane, mixing 2 hours at $20{\pm}57^{\circ}C$. And then, this filtrated it with 400-mesh. It got the purified oil through evaporating them at $55^{\circ}C$ during under vacuum. As the results, appearance was slightly brown, gravity=0.922 acid value=0.12, saponification value=192, and it should be obtained the $40{\pm}5%$ of yield. As the efficacy evalution of cosmetic field, the antioxidative activities by NBT method were stronger 86.0% from extract of talus seeds than 52.0% from green tea extract and 35.0% from skullcap extract as well as the antioxidative activities by DPPH method were stronger 93.7% from extract of seed than 60.3% from extract of green tea and 27.1% from extract of skullcap. These are more effective than other plant extracts. The collagen synthesis rate on the activating fibroblast for Taxus cuspidata Sibe extract showed 35.43%. As the activity of the skin elasticity, PPE(porcine pancreatic elastase)-inhibitory activities of talus extract was 50.8%. Anti-inflammatory activity was more effective to be taken 41.1% of taxus seed oil than 24.2% of steady glycyrrhetinate (SG) as a control.

• 대한두개안면성형외과학회지
• /
• 제19권3호
• /
• pp.175-180
• /
• 2018

Background: The facial bone has a complex structure compared to other bones, and various types of fractures can occur due to its characteristics. Among them, in comminuted fractures of anterior maxillary wall, multiple depressed and impacted bony segments cannot be reduced easily when performing internal fixation using plates and screws or wires, and inadequate restoration leads to a range of complications. This paper introduces an alternative technique using a resorbable mesh with fibrin glue to restore comminuted fractures of anterior maxillary wall. Methods: Thirteen patients were diagnosed with comminuted fractures of anterior maxillary wall between March 2017 and February 2018 in the authors' hospital. All patients with comminuted fractures of anterior maxillary wall underwent restoration using resorbable mesh with fibrin glue. The patients' demographics, causes of facial trauma, mean operation time, length of hospital stay, follow-up period, and complications were recorded. Results: No major complications and only one hypoesthesia of the skin area was noted. Three months after surgery, the hypoesthesia recovered completely. After surgery (mean, 3.9 months; range, 2-12 months), computed tomography showed that the bone fragments in all patients were fixed successfully in their anatomical places. Conclusion: In comminuted fractures of anterior maxillary wall, the use of a resorbable mesh with fibrin glue can be an advantageous and effective method for a successful restoration without complications.

• Archives of Reconstructive Microsurgery
• /
• 제10권2호
• /
• pp.163-168
• /
• 2001

The defects of the abdominal wall could be brought about either congenitally, for instances in such cases as omphalocele or gastroschisis, or by various acquired causes-trauma, excision of tumors, excision of burn scar, tissue necrosis caused by infection, hematoma after abdominal surgery, tissue necrosis after radiation therapy and so on. As for the techniques of the reconstruction of the abdominal wall defects, many authors have developed and reported diverse methods. To summarize, primary closure, skin graft, local skin flaps, various myocutaneous flaps, free flap, fascia graft, artificial mesh, tissue expansion, etc could be used in the reconstruction of the abdominal wall defects. The periumbilical perforator-based island skin flap has a many advantages such as no significant sacrifice of the rectus abdominis muscle, wide rotation arc, reliable blood flow of the perforator, short elevation time for flap, and for middle-aged, obese patients, the donor site may be the best from the cosmetic point of view. We used perforator-based island skin flap in 5 cases with reasonable result from March 1999 to May 2001. There were no significant complications and donor sites could be repaired primarily.

• Computational Structural Engineering : An International Journal
• /
• 제3권1호
• /
• pp.19-29
• /
• 2003

In the present study, finite element linear buckling analysis is performed for grid-stiffened composite plates. A hybrid element with drilling degrees of freedom is employed to reduce the effect of the sensitivity of mesh distortion and to match the degrees of freedom between skins and stiffeners. The preliminary static stress distribution is analyzed for the determination of accurate load distribution. Parametric study of grid structures is performed and three types of buckling modes are observed. The maximum limit of buckling load was found at the local skin-buckling mode. In order to maximize buckling loads, stiffened panels need to be designed to be buckled in skin-buckling mode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.53-55
• /
• 1995

This paper presents the characteristics of linear induction motors fed by a voltage source PWM inverter. In the calculation, 2D finite element method is used considering the movement by moving mesh. Integro-differential approach is adopted for the copper loss calculation considering the skin effect.