• 패션비즈니스
• /
• 제20권6호
• /
• pp.94-110
• /
• 2016

A necessity for infants, diapers are not only used over long durations, but are also in direct contact to the infants' skin, making the choice of diaper to be of utmost importance. Current interest in cloth diapers is rapidly increasing because of issues concerning the baby's health, green environment, and economy. However, previous researches on cloth diapers are limited to simply investigating the form and material of commercial cloth diapers. There are few in-depth researches for the optimal cloth diaper development. This is therefore a fundamental research for the development of optimized cloth diapers, and analyzes the difference in absorption depending on the placement of seam line (liner, darts, and I pattern), the locations of liquid spraying (1 cm and 8 cm ahead of the center), and the amount of liquid capacity (10 and 20 ml). Currently, the development of diaper patterns considers the crotch shape of the infants and the skin length deformation. As a result, in the case of the I-pattern, the horizontal seam line prevents water from spreading to the front and back, thus reducing the absorbed area. This result was more clearly visible when water was sprayed at the center. The effect of the seam line became more obvious when there was more water (20 ml); also, when water was sprayed at the center, more leakage was observed. Using the results of this research, implementation of horizontal seam is expected to prevent the upward spread of urine.

• 한국멀티미디어학회논문지
• /
• 제15권4호
• /
• pp.560-568
• /
• 2012

가상공간 구축 기술은 체험 방법이 다기능화 되면서 동작, 소리, 온도, 압력 등을 인식하여 콘텐츠와 사용자가 상호작용이 가능한 지능형 상호작용 기술 분야로 연구가 확대되고 있다. 가상현실 기술은 3D그래픽 기술과 물리 현상을 가상공간에 적용시켜 현실감을 증대시키고, 가상환경에 하드웨어 장치들을 사용하여 몰입감을 증대시키기 위한 방향으로 연구가 진행되고 있다. 가상 수중 환경에 대한 체감형 콘텐츠의 제작은 사용자의 몰입감을 증대시키기 위해 하드웨어 장치들과 해양 콘텐츠를 연계하기 위한 양방향 인터페이스 기술이 필요하다. 본 연구에서는 수심 변화에 따른 환경 요인들을 분석하여 정규화된 수중 물리 법칙을 적용함으로써 현실적이고 사실감 있는 가상 수중 환경을 표현하고자 하였다. 또한 스킨스쿠버 체감 시뮬레이터를 가상 수중환경과 연동시킴으로써 수중에 직접 들어가지 않고도 스킨스쿠버를 체험해 볼 수 있는 체감형 콘텐츠를 개발하고자 하였다.

• 대한임상검사과학회지
• /
• 제48권4호
• /
• pp.365-370
• /
• 2016

아토피피부염은 가려움증을 보이는 만성의, 재발성의 염증성 피부상태를 말하며 천식, 식품 알레르기, 알레르기 비염 등과 같은 다른 알레르기 질환보다 먼저 발생하고 다양한 면역학적 이상과 이로 인한 다양한 속발 증상도 갖고 있는 만성 재발성의 습관성 질환이다. 본 연구는 TNF-${\alpha}$와 IFN-${\gamma}$로 유도된 HaCaT 세포주를 이용하여 농도별로 PwM 천연물을 처리하였을 때 세포생존율이 우수한 것을 확인하였으며 아토피피부염과 관련된 염증성 사이토카인 즉, IL-6, IL-8, IL-13, MCP-1을 측정하였다. 그 결과 IL-6, IL-13, MCP-1의 생산량은 PwM 천연물에 의해 감소하였고 IL-8은 유의한 변화가 없었다. 앞으로의 연구는 해외생물소재를 활용한 아토피피부염 및 염증에 효과적인 치료제 후보물질을 개발하는 것이며 단백질 분석과 기전 연구를 통해 보다 객관적인 검증이 더 필요하다고 사료된다.

• 한국농공학회지
• /
• 제28권2호
• /
• pp.63-73
• /
• 1986

The model was developed by applying the principles of Bacot and Vidal to measure the behavior of deformation of the reinforced earth wall, and various tasts were performed by using the plastic fabric filter and the galvanized steel plate as a strip. The results obtained are as follows; 1. When the reinforced earth wall is deformed by the load, the strip is completely reinforced by the backfill materials and changed to the rigid block state, under the state of failure which permits sliding only, the next theoretical equation is formed. (H/L) . tan$\theta$ [cosO-sinOtanO] =2sinO[tan($\theta$ +0) +tanO] 2.The degree of the mutual reinforcement of the backfill material and the strip depend on the physical characteristics of the each material especially the angle of shearing resistance of the backfill material is desirable over 20$^{\circ}$ and, if it is over 400, its function could be a maximum. 3.The distribution of the maximum tensile strain of the reinforcement is changing with the height of reinforced earth wall, and when the height from bottom of the reinforced earth wall is 1.85 to 3. 35m, the maximum tensile strain appears at 2m from the skin element. The maximum tensile strain is increased by the depth of the reinforced earth wall from surface, and increased with the lapse of time after construction. 4.The failure surface of the reinforced earth wall by the concrete skin was about 60$^{\circ}$and the failure behavior of the reinforced earth wall in which the fabric filter was buried was slow, and so the pore pressure could be decreased. 5.It is possible to construct the fabric retained earth wall by the plastic fabric filter only. And the reinforcing effect between the steel plate and the plastic fabric filter is not largely different. however, in the aspect of the economic durability, the plastic fabric filter is more advantageous. 6.The reinforcing action mainly depends on the width and the length of the reinforcing materials, if possible, the full width is advantageous to enlarge the contact area with backfill. but considering the economic aspect, it is neccessary to develop the method controlling the space of the strip.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.295-299
• /
• 2006

The inner-structure bonded(ISB) sheet metal is defined as a composite sheet metal which has middle layer of truss-structure between two skin sheets. The characteristics such as ultra-light weight, high rigidity, high strength, etc are required especially for automobile parts. The characteristic of ISB sheet metal depends on inner-structure pattern or method of bonding. Pyramid type of crimped expanded metal is used for inner-structure and both of resistance welding and adhesive bonding are applied to make a specimen. As a result of compression test, it is appeared that forming limit is 10% reduction in thickness under a load of 8kgf per unit element(one inner-structure). In case of uniaxial tensile test the non-uniform surface integrity rather than the buckling of inner-structure happened at a load of 450kgf, which indicates elongation of 7.2% and thickness reduction of 13%. The eye-inspection method was applied to examine the defects occurring on the specimen during stretch forming. In case of biaxial stretch forming only the non-uniform deformation on the surface of a skin sheet could be observed. The forming limit in stretching of ISB sheet metal with the hemi-spherical punch of 150mm in diameter was 3mm in forming depth and 5% reduction in thickness.

• Archives of Plastic Surgery
• /
• 제32권3호
• /
• pp.311-313
• /
• 2005

Generally, many Asian women tend to dislike the square jaw, as they believe it makes the face look wider, giving a stubborn and strong impression. Contouring of the mandible is therefore a relatively common aesthetic procedure among Asians. These days, the use of botulinum toxin for contouring of the lower face offer simple alternative to surgery. Motor point, which is the site over a muscle where its contraction may be elicited by a minimal intensity short duration electrical stimulus, is the optimal injection point of botulinum toxin. Study was undertaken to identify the location of motor point of the masseter muscle and the skin surface landmark. First, the thickest point of the masseter muscle was inspected through palpation and inspection by 3 different individual plastic surgeons and then compound muscle action potentials(CMAPs) of masseter muscle in 15 health volunteers were recorded using EMG. For the localization of the measured points, line between lateral canthus to the mandibular angle was used. Location of motor points were mapped to skin surface from lateral canthus in a percentage of the distance along the landmark line and in distance in millimeters. The clinical injection point was located at 71.69 percentile and 7.3 mm of the landmark line. The motor point test was located at 72.54 percentile and 7.1 mm of the landmark line. The depth of motor point was 16mm. There was no statistically significant difference between the clinical injection point and the motor point. We conclude that surface mapping of motor point of the masseter muscle would increase accessibility and accuracy in botulinum toxin injection for contouring of the lower face.

• Steel and Composite Structures
• /
• 제27권3호
• /
• pp.337-353
• /
• 2018

In previous weak-axis moment connection tests, brittle fracture always initiated near the edge of the beam flange groove weld due to force flow towards the stiffer column flanges, which is the opposite pattern as strong-axis moment connections. As part of the China NSFC (51278061) study, this paper tested two full-scale novel weak-axis reduced beam section moment connections, including one exterior frame connection specimen SJ-1 under beam end monotonic loading and one interior frame joint specimen SJ-2 under column top cyclic loading. Test results showed that these two specimens were able to satisfy the demands of FEMA-267 (1995) or ANSI/AISC 341-10 (2010) without experiencing brittle fracture. A parametric analysis using the finite element software ABAQUS was carried out to better understand the cyclic performance of the novel weak-axis reduced beam section moment connections, and the influence of the distance between skin plate and reduced beam section, a, the length of the reduced beam section, b, and the cutting depth of the reduced beam section, c, on the cyclic performance was analyzed. It was found that increasing three parametric values reasonably is beneficial to forming beam plastic hinges, and increasing the parameter a is conducive to reducing stress concentration of beam flange groove welds while increasing the parameters b and c can only reduce the peak stress of beam flange groove welds. The rules recommended by FEMA350 (2000) are suitable for designing the proposed weak-axis RBS moment connection, and a proven calculation formulation is given to determine the thickness of skin plate, the key components in the proposed weak-axis connections. Based on the experimental and numerical results, a design procedure for the proposed weak-axis RBS moment connections was developed.

• Radiation Oncology Journal
• /
• 제2권1호
• /
• pp.11-20
• /
• 1984

The renewed interest in the use of hyperthermia in cancer therapy is bases on radiobiological and clinical evidence indicated that there may be a significant therapeutic advantage with the use of heat alone or combined with radiation or chemotherapy, There are many methods for generating heat for localized tumor as like radiofrequency, microwave, electromagnetic induction and ultrasound. But it is very difficult to be even thermal dose distribution and stable output of power and then the detection of temperature in tumor is difficult to be precise with thermocouples and semiconductor sensors. We designed the microwave heating generator, dipole antenna applicators and autometic temperature controlled thermocouples for localized hyperthermia on skin and in cavities. 1. The microwave generator with 120 W, 2,450MHz magnetron could be heating up to $40^{\circ}C\~50^{\circ}C\;for\;1\~2$ hours in living tissues. 2. The thermal dose distribution in tissue with microwave was described $42^{\circ}C\~44^{\circ}C$ with in 3 cm depth and $2\~6cm$ diameter area. 3. Skin surface heating applicator with spiral 3 times wave length antenna radiated high Power of microwave. 4, Intracavitary heating applicator with dipole antenna with autometic control temperature sensor kept up continuously constant temperature in tissue. 5. For constant thermal distribution, applied two steps power with 10W microwave after $17\~20W$ during first 10 minutes. 6. The cooling rate by blood flew in living tissue was rised as $10\%$ then meats.

• 대한수의학회지
• /
• 제56권2호
• /
• pp.97-101
• /
• 2016

Emodin is an anthraquinone derivative from the roots of Rheum officinale Baill that possesses a variety of biological activities, including inhibition of $5{\alpha}$-reductase and prostaglandin D2. In this study, we investigated whether emodin promotes hair growth. After emodin was topically applied to the shaved dorsal skin of telogenic C57BL/6 N mice, the hair growth rate and morphological analysis were evaluated in dorsal skin for 15 days. After 13 days of treatment, minoxidil or emodin (0.01% or 0.1%)-treated groups showed remarkable regrowth of hairs relative to the vehicle control group. Scoring of the hair growth and rate of hair growth area for 15 days revealed that groups treated with minoxidil and 0.1% emodin were significantly higher than the vehicle control group. Histological examination revealed the emodin and minoxidil groups markedly recovered the number and morphology of hair follicles, including the subcutis depth, relative to the vehicle group. These results suggest that emodin has an excellent promoting effect in hair growth similar to that of minoxidil and might be useful for treatment of baldness or alopecia.

• 대한의용생체공학회:의공학회지
• /
• 제23권4호
• /
• pp.323-327
• /
• 2002

만성 당뇨병 질환자는 일 2회 이상 모세혈액을 채취하여 혈당검사를 행함으로써 자신의 혈당 수준을 지속적으로 관리해야 한다. 모세혈액 채취를 위하여 채혈침으로 빈번하게 피부관통을 행해야 하므로 채혈시 뒤따르는 통증은 대단히 중요한 문제이다. 본 연구에서는 기존의 수동 및 자동 채혈침들이 가지는 통증 유발요인들을 모두 최소화하는 기전을 고안하였다. 경사각을 이루는 taper형 스프링, 채혈침을 일관성있는 방향으로 이동시키는 guiding tunnel, 현존하는 기술로 제조할 수 있는 가장 가는 30G 채혈침을 적용함으로써 통증을 최소화 하였다. 침의 침투 깊이를 피하 2mm로 제한하여 통증을 최소화하는 동시에 출혈량을 감소시켰다. 또한 환자 간 감염 및 이차 감염을 방지하기 위하여 사용이 용이한 재사용 방지기전을 설치하였다. 당뇨질환자. 일반인 및 간호실습생들을 대상으로 한 임상실험 결과 통증 및 사용편의성과 안전성 모두 우수한 것으로 입증되었다. 일회 채혈로 모두 성공적인 혈당검사가 가능하였으며 단순한 구조의 소형화 ·일체화된 일회용 자동채혈침의 형태로 구현하였다 본 연구결과는 혈담검사를 위한 모세혈액 채취시 최적의 방법을 제공하였으며 실용성 또한 우수한 것으로 판단되었다.