• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.702-709
• /
• 2008

In this paper, Developed u-Marketing system prototype based on location base service could offer because this treatise combines personalized and mobility. It is u-Marketing system takes advantage of u-LBS base skill to support marketing that is old Mobile more efficiently u-marketing call center. If it was marketing in spam way that marketing to be Mobile passes public information contents one-sidely to unspecificness many customers so far, u-Marketing system takes advantage of u-LBS base skill-marketing system is u-marketing system of location base that can take advantage of subscriber's location information through portable phone or GPS with transfer telegraph operator adulterating member's distinction of sex, age, residential district, profession and support satisfied article ordered style Target marketing.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.360-364
• /
• 2009

To verify the suitability of the Railroad safety requirements analysis, the actions of the function which it follows in a given operation condition are composed of the rule model or the state model. And it test must be possible. The subject of condition transfer in compliance with the transfer condition which is an event of system it will be able to accomplish the operation of system. However, tasks allocated to the actor are the duty which is added in organization. This time, the start of duty task is started in compliance with an external or internal condition. If there are 9 tasks which have one objective, the relationship among the previous and the current internal tasks and next tasks which will given is able to show in logical model. Thus when planning an organization, the integral part of class must include Task, Role and Position. And this time we make a series of outputs of examination of organizing model and examples to meet the capable skill.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.1
• /
• pp.78-82
• /
• 2010

The feeder pipe of Main Primary Heat Transfer System in Wolsong Nuclear Power Plant was inspected by the Ultrasonic Phase Array technique in 2010. It is the first time to apply this method to the construction at Nuclear Power Plant in Korea. The time required for UT technique is less than RT method. The UT method doesn't need to evacuate personnel who works nearby inspecting area and doesn't need to wait developing of film. For these reasons, the UT method is the fastest method among the volumetric inspections. As a result of the examination, it became clear that main defect of the feeder pipe is the Lack of fusion in the welded area. Moreover, the rate of defect was reduced gradually as improvement of welder's skill. If welding machine has problem, the defect has tended to same pattern(occurred same position in the welding area) but these defects were founded without specific rules. For these reasons, the creation of defect is dependent on the skill of worker not on the automatic welding machine. This evaluation of defect signal and collecting data would be useful to further examination in ISI.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.4
• /
• pp.576-582
• /
• 2015

The efficiencies of thermal power system using fossil fuel depend on heat exchangers which extract energy from the exhaust gas before it is expelled to the atmosphere. To increase heat transfer efficiency it is very important to maintain the surface of heat exchanger as clean condition. The accepted skill of cleaning of fouled surface of heat exchanger is soot blowing. A high pressure jet of air is forced through the flat surface of plate to remove the deposit of fouling. There is, however, little knowledge of the fundamental principles of how the jet behave on the surface and how the jet actually removes the deposit. Therefore, the study focuses on the measuring of cleaning area and cleaning dwell time after accumulating the simulated deposit on the flat surface. The deposit test rig was built for the study and simulated deposit material is used after measuring the physical property of the each material by shearing stress test. Much data was obtained for the analysis by the parameters change such as the different jet speed, different inner pressure and variable distance of the jet from the test rig surface. The experimental data was compared with the theoretical equation and most of the data matches well except some extreme cases.

• Journal of Engineering Education Research
• /
• v.12 no.3
• /
• pp.3-12
• /
• 2009

The recent development of engineering design education has brought enormous influence in many engineering educations. But, most studies in this area have focused only on the system or curriculum development rather than on the effect of the program to the real situation, the transfer. The purpose of this study is to identify the effects of learning and learning transfer in engineering design program at the university level. Transfer is defined as the use of trained knowledge and skill back on the job. The results of the study are as follows. First, learner characteristics and curriculum design had a significant influence on learning effectiveness. Second, learner characteristics had a significant influence an learning transfer. Also, the learning had a significant influence an learning transfer.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.801-807
• /
• 2024

Linear motion robots are devices that perform functions such as transferring parts or positioning devices, and require high precision. In companies that develop linear robot application systems, human workers are in charge of quality control and fault diagnosis of linear robots, and the result and accuracy of a fault diagnosis varies depending on the skill level of the person in charge. Recently, there have been many attempts to utilize artificial intelligence to diagnose faults in industrial devices. In this paper, we present a system that automatically diagnoses linear rail and ball screw misalignment of a linear robot using transfer learning. In industrial systems, it is difficult to obtain a lot of learning data, and this causes a data imbalance problem. In this case, a transfer learning model configured by retraining an established model is widely used. The information obtained by using an acceleration sensor and torque sensor was used, and its usefulness was evaluated for each case. After converting the signal obtained from the sensor into a spectrogram image, the type of abnormality was diagnosed using an image recognition artificial intelligence classifier. It is expected that the proposed method can be used not only for linear robots but also for diagnosing other industrial robots.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.197-205
• /
• 2000

Productivity of container cranes and gantry cranes is influenced by the performance of crane hardware and cycle time. Cycle time in container handling is influenced by the path of containers and relative positioning of containers. So we have to minimize the sway of containers and spreaders to minimize relative positioning time. And sway minimization is influenced by the skill of workers in manual gantry cranes. In this paper, we will survey some anti-sway systems. Each system has some merits and some shortages. And we will show our choice and its experimental equipment which is under construction.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2788-2790
• /
• 2002

In this paper, we designed neural network predictive two degree of freedom PID controller to control sway of crane Crane's trolley arrive minimum oscillation of transfer body and establishment position in minimum time. When various establishment location and surrounding disturbance were approved based on mathematical modeling of crane, controller designed to become effective control location error and oscillation angle of two control variables that simultaneously can predictive control. We wish to develop automatic travel control system through anti-sway skill of crane.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.3
• /
• pp.109-114
• /
• 2005

The founding purpose of Business Incubation System is to induce those businessmen who have technology and promising business ideas but are lacking fund, information, and management skill, and to speed up their business establishment and enhance the level of success by providing them with managerial knowledge, production technology, design, and equipment. While some universities made Business Incubation Center to achieve the above purpose, some other universities, especially the local ones, believed that Business Incubation Center, if managed successfully, could be an accelerator picking up the sluggish local economies. This study studied the motivators that let them move in an Incubating Center, their request for support, their level of expert utilization, and the role of head of a Center. This study found a significant level of correlation among the variables such as industrial-educational cooperation, the development of common items, utilization of professors with matching majors, utilization of research professors, and transfer of technology.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.757-759
• /
• 2013

Until just a few years ago, digital circuit design techniques in register transfer level using Verilog or VHDL have been recognized as the up-to-date way compared with the traditional schematic design, and truly they have been used as the most popular skill for most chip designs. However, with the advent of era in which the complexity of semiconductor chip counts over billion transistors with advanced manufacturing technology, designing in register transfer level became too complex to meet the requirements of the needs, so the design paradigm has to change so that both design and synthesis can be done in higher level of abstraction. Bluespec SystemVerilog (BSV) is the only HDL which enables both circuit design and generating synthesizable code in the system level developed so far. In this contribution, I survey and analyze the features which supports the new paradigm in the BSV HDL, not very familiar to industry yet.