• 제목/요약/키워드: Skid resistance performance

검색결과 26건 처리시간 0.021초

미끄럼방지포장 유지관리를 위한 미끄럼저항 성능평가방법 비교 연구 (A Comparative Study on Skid Resistance Performance Evaluation Methods for Maintenance of Skid Resistance Pavement)

  • 조현우;노상균;이봉춘;정윤석
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제27권6호
    • /
    • pp.79-85
    • /
    • 2023
  • 미끄럼방지포장은 도로의 부속물로서 도로 및 교통 특성으로 인해 미끄럼저항을 충분히 확보하지 못한 곳이나 도로선형의 변화가 심한 구간에서 포장의 미끄럼저항을 높여 자동차의 안전한 주행을 도모하기 위한 시설이라고 명시하고 있다. 특히, 눈, 비, 블랙아이스와 같은 기상 악천후 상황에서 미끄럼방지포장의 미끄럼저항성능은 도로교통 및 운전자의 안전에 큰 영향을 미친다. 하지만 현재 미끄럼저항성능을 측정하는 데 주로 사용되는 BPN은 시험 면적이 0.009 m2에 불과하여 전체 포장면에 대한 대표성을 나타내기 어렵기 때문에 미끄럼방지포장 유지관리를 위한 신뢰성 있는 미끄럼저항성능 평가방법이 필요한 실정이다. 본 연구에서는 지침 및 표준 조사를 통하여 BPN, SN, GN 시험의 미끄럼저항 성능평가 방법을 비교하고 현장 미끄럼저항 성능평가에 적용하고자 하였다. 또한, 미끄럼방지포장의 체계적인 유지관리를 위하여 미끄럼방지포장재 미끄럼저항 성능평가 Test-bed 및 실도로 실증 현장에 미끄럼저항성능이 다른 미끄럼방지포장을 설치하여 성능평가방법(BPN, SN, GN)별 미끄럼저항성능을 비교하였다. 실험결과, SN과 GN은 미끄럼저항성능이 비슷한 경향으로 나타났으며, GN은 BPN × 0.01 과 유사하게 도출되었다.

미끄럼저항성능을 고려한 바닥재 시공법의 성능평가방안 (Value Analysis of Floor Covering Methods Considering the Skid Resistance Performance)

  • 윤차웅;설재남;서종원
    • 한국건설관리학회논문집
    • /
    • 제13권2호
    • /
    • pp.58-69
    • /
    • 2012
  • 현대사회는 대도시의 구조물 설계 시 협소한 공간제약을 극복하기 위해 옥상 및 지하공간을 활용하고 있으며, 이에 따라 바닥재의 시공도 증가하고 있다. 바닥재의 미끄럼저항성능은 보행자 및 운전자의 안전성 및 쾌적성 관점에서 대단히 중요한 성능임에도 불구하고, 바닥재의 미끄럼저항성능에 대한 뚜렷한 기준이 없어 개선이 되고 있지 않은 실정이다. 본 논문에서는 국토해양부의 도로안전시설 설치 및 관리지침과 서울시의 서울형 보도포장 미끄럼 저항 기준에 기초하여 미끄럼저항성능의 평가방안을 제시하였다. 세 가지의 우레탄 바닥재 시공법을 선정하여 실험적인 연구를 통해 각 바닥재의 미끄럼저항성능을 분석하고, 제시된 평가 방안에 따라 평가하였으며, VE분석을 통해 세 가지 바닥재 시공법의 성능을 종합적으로 평가함으로써 미끄럼저항성능이 우수한 바닥재가 시공될 수 있도록 독려하였다. 본 논문에서 제시된 평가방법에 따른 VE분석 결과, 미끄럼저항성능이 최대 4배 이상 향상되었던 파티클재료를 첨가한 공법이 83.86의 성능지수를 보임으로써 기타 비교안에 비해 가장 우수한 성능을 나타내었다.

미끄럼 방지 도로 포장을 위한 국내형 패턴 프레임 공법 개발 (Development of Domestic Pattern Frame Method for Skid Resistance Pavement)

  • 이태민;최하진
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제25권2호
    • /
    • pp.58-65
    • /
    • 2021
  • 도로의 유지관리 방안으로 미끄럼 방지포장에 대한 시공사례가 급증하고 있다. 패턴 프레임 공법은 도로 표면에 신재료를 추가하는 방식으로 미끄럼 저항 성능향상과 함께 미관을 향상시킬 수 있는 장점을 지니고 있다. 하지만 시공되고 있는 패턴 프레임 공법은 수입산 소재에 의존하고 있으며, 수출규제로 인한 중요소재수급에도 문제를 보이고 있다.. 본 논문에서는 국내형 패턴 프레임 공법 개발을 위하여 사용되는 중요소재를 국산화 하고 개발 공법에 대한 중요지표 성능 검증을 진행하였다. 중요 성능 지표는 언더코팅 소재의 부착강도, 시공 완료된 패턴 프레임의 미끄럼 저항 성능이다. 부착강도는 1.4MPa를 목표로 진행하였으며 국산화 대체 소재는 2.35MPa로 목표 성능을 만족하였고, 미끄럼 저항 성능은 40BPN을 목표로 진행하였으며 국산화 대체 소재는 75BPN으로 목표 성능을 만족하였다. 경제성 분석 결과, 국산화 소재의 경우 패턴 프레임 전 공정에 사용되는 재료비가 1m2 기준으로 해외 소재 대비 40% 절감되는 것을 확인하였다. 추가적으로 현장 시범 시공 및 관련 지표 모니터링을 통하여 개발 공법을 검증완료 하였다.

아스팔트 도로포장 유지보수용 표면처리공법의 공용성 평가 (Performance Evaluation of Surface Treatments for Asphalt Pavement Preservation)

  • 임정혁;김영수;백철민
    • 한국도로학회논문집
    • /
    • 제17권2호
    • /
    • pp.89-98
    • /
    • 2015
  • PURPOSES : The objective of this study is to evaluate the performance properties of chip seals and fog seals with polymer-modified emulsions. METHODS : The performance of chip seals and fog seals was evaluated on the basis of common issues in surface treatments. Granite aggregate and four types of asphalt emulsions (one of the unmodified and three of the modified emulsions) were used considering the usage in field. A Vialit test was performed to determine the aggregate retention, and the MMLS3 (Third Scale Model Mobile Load Simulator) test was conducted to determine the aggregate retention, bleeding, and rutting. In addition, the fog seal specimens were tested by the BPT (British Pendulum Test) to evaluate skid resistance. RESULTS AND CONCLUSIONS : Overall, the polymer-modified emulsions (PMEs) showed better aggregate retention and bleeding resistance for both chip seals and fog seals. When comparing the performance of the PMEs, the difference was not considerable. In addition, PMEs present significantly better rutting resistance than unmodified emulsions. For skid resistance, if the recommended mix design is applied, the specimens do not cause issues with skid resistance. Although all of the fog seal specimens were over the criteria for skid resistance, the specimen fabricated by the high emulsion application rate (EAR) of the unmodified emulsion was nearly equivalent to the skid value criteria. Therefore, the use of an unmodified emulsion with a high EAR should be carefully applied in the field.

아스팔트콘크리트 포장의 노면 미끄럼 저항성 평가 (An Evaluation of Skid Resistance Properties of Asphalt Concrete Pavement)

  • 김낙석;정해수
    • 한국재난정보학회 논문집
    • /
    • 제7권2호
    • /
    • pp.87-95
    • /
    • 2011
  • 노면의 미끄럼 저항성은 교통안전과 직결되는 도로 포장의 중요한 특성이다. 특히 우천 시 차량의 미끄러짐에 의한 교통사고를 줄이기 위해서는 도로의 성능 평가 시 반드시 고려해야 할 사항이다. 또한 자동차의 성능이 개선되고 운전자의 연령이 상대적으로 낮아짐으로써 고속주행을 하거나 급제동을 하는 운전 행태가 증가함에 따라 포장의 미끄럼저항성 역시 개선할 필요성이 더욱 증가하게 되었다. 그러므로 교통사고를 줄이기 위해서는 노면의 미끄럼저항성 시험을 통해 포장의 품질을 검증하고 또 향상시켜야 한다. 본 연구에서는 미끄럼 포장의 품질을 검증하기 위한 방법으로 휴대용 미끄럼저항 시험기 및 자동식 미끄럼저항 측정 장비의 측정원리를 분석하여 실제 포장변에 대하여 미끄럼 저항성을 평가하도록 하였다. 일반 밀입도 포장, 배수성 포장, SMA 포장에 실시한 미끄럼 저항성 평가는 배수성 포장과 SMA 포장의 노후화에 따라 일반 밀입도 포장의 미끄럼 저항성이 가장 크게 나타났다.

소수성 특성을 이용한 저점도 AP 표면처리재의 현장 적용성 연구 (A Study on Field Applicability Evaluation of the Hydrophobic - Low Viscosity Surface Treatment Material for Pavement Preventive Maintenance)

  • 최준성
    • 한국도로학회논문집
    • /
    • 제16권1호
    • /
    • pp.31-39
    • /
    • 2014
  • PURPOSES : Surface treatment material for pavement preventive maintenance should be inspected field applicability. This study(Part II) aimed to checkup coating characteristics and performance analysis using lab and field tests. The hydrophobic - low viscosity filling material for pavement preventive maintenance is presented in Part I, which is a series of companion study. METHODS : Relative comparison between general asphalt mixtures and surface treatment asphalt mixtures are analyzed and measured for the field application such as indirect tensile strength ratio(TSR), abrasion resistance, crack propagation resistance, temperature resistance, coating thickness, permeability resistance and skid resistance in terms of british pendulum number(BPN). RESULTS : It is found that TSR, crack propagation resistance and permeability resistance is increased as against uncoated asphalt specimen. Abrasion resistance and temperature resistance is secured from the initial coating thickness point of view, which is about 0.2~0.3mm. Skid resistance on the surface treatment pavement is satisfied with the BPN criteria of national highway because of exposed aggregate and crack sill induced pavement deterioration and damage cracks. CONCLUSIONS : The hydrophobic - low viscosity surface treatment material for pavement preventive maintenance is validated on field applicability evaluation based on quantitative analysis of coating thickness and performance analysis using lab and field tests.

친환경 아스팔트 도로포장의 현장 공용성 분석 (An Evaluation of Field Performance of Environmentally Friendly Asphalt Pavement)

  • 김낙석
    • 한국재난정보학회 논문집
    • /
    • 제9권1호
    • /
    • pp.22-29
    • /
    • 2013
  • 중온 아스팔트 포장공법은 밀입도 아스팔트 포장공법 대비 생산 및 포설온도를 낮추어 생산 및 시공이 가능한 포장공법으로 연료 소모량과 온실가스 배출량 면에서 효과가 우수하다. 본 연구에서는 중온 개질 아스팔트 포장의 장기 현장 공용성을 평가하기 위하여 시험포장이 실시 된 구간에 대해 미끄럼 저항성, 소성변형, 평탄성과 같은 현장실험을 수행하였다. 현장실험 결과 미끄럼 저항성은 공용 20개월 후에도 공용초기와 같이 S1 위험도 1기준을 만족시켰으나 소성변형, 평탄성에서는 공용기간에 따라 다소 감소추세를 보였다. 그러나 현장실험이 수행된 구간은 버스정류장으로 중차량 통행량이 많고 중차량인 버스의 출발과 정지가 반복되는 가혹한 환경조건에 노출되어 있음을 고려하였을 때 소성변형, 평탄성의 감소추세는 수용할 수 있는 정도이다. 균열의 경우 공용 11개월 후에는 관찰되지 않았으나 공용 20개월 후 에는 미세한 균열이 발생한 것을 관찰 할 수 있었는데 이는 첨가된 섬유로 인해 혼합물의 균열 저항성이 향상된 것으로 판단된다.

아크릴 수지로 코팅한 배수성 아스팔트 콘크리트의 특성 평가 (Characterization of Porous Asphalt Concrete Coated with MMA Resin)

  • 최태준;이현종;김태우;송재혁
    • 한국도로학회논문집
    • /
    • 제11권2호
    • /
    • pp.111-120
    • /
    • 2009
  • 본 연구는 배수성 아스팔트 포장의 표면을 아크릴 수지로 코팅 처리할 경우 내구성 측면 및 기능적 측면에서 어떠한 효과가 있는가를 실내시험을 통해 평가하는 기초적인 연구이다. 포장의 내구성 측면에서는 칸타브로 및 휠트래킹, 수분손상 간접 인장 피로 시험 등을 실시하였다. 시험결과 시편을 수지로 코팅을 한 경우 칸타브로 손실률이 3배 정도 감소되었고 균열에 대한 저항성도 대폭 향상되었으나 수분손상 및 소성변형의 저항성은 큰 차이가 없는 것으로 나타났다. 기능적인 측면에서는 코팅 전 후의 투수계수 및 공극률 BPT(British Pendulum Tester)를 사용한 미끄럼 저항성의 변화를 측정하였다. 시험결과 공극률 및 투수계수는 약간 저하되나 기능상의 문제는 없을 것으로 판단되며, 미끄럼 저항성은 규사를 살포하지 않을 경우 미끄럼 저항성이 감소되나 규사를 살포할 경우 코팅 전 수준 이상의 미끄럼 저항성을 확보하는 것으로 나타났다.

  • PDF

시험시공을 통한 소입경 골재노출 콘크리트포장의 초기 공용성 평가 (Initial Performance Evaluation of Fine-size Exposed Aggregate PCC Pavement by Experimental Construction)

  • 김영규;최돈화;이승우;김형배
    • 한국도로학회논문집
    • /
    • 제12권1호
    • /
    • pp.87-98
    • /
    • 2010
  • 소입경 골재노출 콘크리트포장은 콘크리트 타설 직후 포장표면에 응결지연제를 살포하여 표면으로부터 2~3mm 정도의 모르타르 경화를 늦추게 한 후 표면의 모르타르 제거를 통해 굵은 골재를 포장표면에 노출시키는 공법이다. 소입경 골재노출 콘크리트포장의 타이어-노면 소음은 일반 콘크리트포장보다 작으면서도 적정한 미끄럼저항을 장기간 유지한다는 장점을 가지고 있다. 성공적인 소입경 골재노출 콘크리트포장의 건설을 위해서는 굵은골재의 최대입경이 적정하여야 하며 적정량의 굵은골재를 포장표면에 균일하게 노출하도록 해야 하기 때문에 이를 위한 적절한 배합과 노출기법의 도출이 요구된다. 본 연구에서는 소입경 골재노출 콘크리트포장의 시험시공을 실시하여 초기 공용성을 평가하였으며, 이를 통하여 적정 강도, 저소음 및 적정 미끄럼저항을 확보함을 확인하였다.

1액형 광촉매를 아스팔트 포장에 적용하기 위한 기초연구 (Fundamental Study on Applying an Integral TiO2 Solution to Asphalt Pavement)

  • 박재영;김영;김혁중;황용경;이재준
    • 한국도로학회논문집
    • /
    • 제19권1호
    • /
    • pp.53-62
    • /
    • 2017
  • PURPOSES : This research was a fundamental study on the application of an integral $TiO_2$ solution to asphalt concrete pavement. The integral $TiO_2$ solution was produced in pilot production equipment; application of the integral $TiO_2$ solution to asphalt pavement was conducted to examine the pollution-reducing capability of photocatalytic compounds such as $TiO_2$. The photocatalytic $TiO_2$ reacted with air pollutants, converting them into small amounts of relatively benign molecules. METHODS : In this study, laboratory experiments were conducted using five various testing methods. Tensile strength ratio (TSR) and British pendulum test (BPT) were conducted in order to evaluate the properties of asphalt pavement subsequent to the integral $TiO_2$ solution coating. In addition, methylene blue testing, a measurement of nitrate on the coated pavement, and nitrogen oxide (NOx) reduction testing were conducted in order to evaluate photocatalytic reaction. Lastly, a UV-A lamp was used as a light source for photocatalytic reactions. RESULTS : Test results indicated no change in the properties of asphalt pavement following the integral $TiO_2$ solution coating. In order to evaluate the performance of asphalt pavement as a function of $TiO_2$, the moisture susceptibility and skid resistance were investigated. The moisture susceptibility and skid resistance satisfied there quirements related to pavement quality and safety specification. Furthermore, the effects of reduction of air pollution were significantly improved as determined via the methylene blue test and NOx reduction test. The $TiO_2$-paved asphalt specimen exhibited approximately 43% reduction of NOx. CONCLUSIONS : This study has suggested that applying $TiO_2$ rarely impacts asphalt pavement performance measures such as moisture susceptibility and skid resistance, and that its application may be a better means of reducing air pollution. Further studies, such as proper $TiO_2$ dosage rates and compatibility with various pavement types, are required to broaden and generalize its application.