• The korean journal of orthodontics
• /
• v.42 no.5
• /
• pp.270-278
• /
• 2012

In the correction of dental Class III molar relationship in skeletal Class II patients, uprighting of the mandibular posterior segments without opening the mandible is an important treatment objective. In the case reported herein, a C-tube miniplate fixed to the lower labial symphysis and connected with a nickel-titanium reverse-curved archwire provided effective uprighting of the lower molars, without the need of orthodontic appliances on the mandibular anteriors. Using this approach, an appropriate magnitude of force is exerted on the molars while avoiding any negative effect on the mandibular anteriors.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.3
• /
• pp.215-222
• /
• 2014

Purpose: The aim of this study was to investigate differences between the morphology of the mandibular symphysis and four facial skeletal types. Materials and Methods: 40 cone-beam computed tomographies were selected and classified in to 4 groups according to their vertical and anterior-posterior skeletal patterns. The bone volume ($mm^3$) of the symphysis, the cross sectional area corresponding to the 4 mandibular incisors' axis: the cross sectional area of total bone ($mm^2$), the area of the cancellous bone ($mm^2$) and the thickness (mm) of labial and lingual alveolar bone at 2 mm, 3 mm under the cemento-enamel junction (CEJ) were measured. General linear model (GLM), Kruskal-Wallis test and Tukey honestly significant difference (HSD) test were subsequently used for statistical analysis. Results: The lingual cortical bone thickness of the lateral incisors at 2, 3 mm under CEJ was greater in the Class I low angle group than the other 3 groups (P < 0.05). There were no statistically significant differences in the volume of the mandibular incisor bony support, cross-sectional area of total bone and cancellous bone at the mandibular incisor' axis. Conclusion: Patients in Class I, low angle group have a thicker lingual mandibular symphysis than Class I, high angle patients.

• Journal of Oral Medicine and Pain
• /
• v.48 no.3
• /
• pp.123-130
• /
• 2023

This case report describes the orthodontic treatment of a patient with severe anterior open bite and skeletal class II malocclusion with temporomandibular joint (TMJ) osteoarthritis (OA) of the left condyle. The 21-year-old male patient had open-bite malocclusion, mild crowding, and protrusion of the anterior teeth. Mild erosive changes were detected in the anterior part of the left mandibular condyle on cone-beam computed tomography; however, because no clinical symptoms were present, orthodontic treatment was performed. It is imperative to consider the potential implications of orthodontic treatment on the stability of the TMJ throughout the duration of treatment, as any instability can exacerbate TMJ OA. Hence, it is crucial to opt for the least invasive treatment modality available. In this regard, orthodontic treatment using a skeletal anchorage system as an alternative to conventional orthognathic surgery for patients with open bite holds great promise, as it not only ensures mandibular stability but also significantly ameliorates the open-bite condition.

• The korean journal of orthodontics
• /
• v.44 no.5
• /
• pp.236-245
• /
• 2014

Objective: To evaluate the therapeutic effects of a preformed assembly of nickel-titanium (NiTi) and stainless steel (SS) archwires (preformed C-wire) combined with temporary skeletal anchorage devices (TSADs) as the sole source of anchorage and to compare these effects with those of a SS version of C-wire (conventional C-wire) for en-masse retraction. Methods: Thirty-one adult female patients with skeletal Class I or II dentoalveolar protrusion, mild-to-moderate anterior crowding (3.0-6.0 mm), and stable Class I posterior occlusion were divided into conventional (n = 15) and preformed (n = 16) C-wire groups. All subjects underwent first premolar extractions and en-masse retraction with preadjusted edgewise anterior brackets, the assigned C-wire, and maxillary C-tubes or C-implants; bonded mesh-tube appliances were used in the mandibular dentition. Differences in pretreatment and post-retraction measurements of skeletal, dental, and soft-tissue cephalometric variables were statistically analyzed. Results: Both groups showed full retraction of the maxillary anterior teeth by controlled tipping and space closure without altered posterior occlusion. However, the preformed C-wire group had a shorter retraction period (by 3.2 months). Furthermore, the maxillary molars in this group showed no significant mesialization, mesial tipping, or extrusion; some mesialization and mesial tipping occurred in the conventional C-wire group. Conclusions: Preformed C-wires combined with maxillary TSADs enable simultaneous leveling and space closure from the beginning of the treatment without maxillary posterior bonding. This allows for faster treatment of dentoalveolar protrusion without unwanted side effects, when compared with conventional C-wire, evidencing its clinical expediency.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.3
• /
• pp.329-339
• /
• 2022

The purpose of this study was to compare the palatal dimensions (volume, width, length, and height) in different malocclusions (Class I, II, and III) in mixed dentition using a three-dimensional digital scanner. The study was performed on 30 selected casts from 1400 casts that were taken at the Department of Pediatric Dentistry at Dankook University. Casts consisted of Class I, II, and III malocclusion groups in Hellman's dental age IIIA. The mean age was 8 years and 6 months ± 11 months. Each cast was scanned by three-dimensional digital scanner, Medit T710 (Medit, Seoul, Korea), and shaped into the three-dimensional image and calculated palatal dimensions using the Plan T program (SMD solution, Seoul, Korea). The values were statistically compared and evaluated by Kruskal-Wallis followed by the Mann-Whitney test. According to our results, subjects with Class II malocclusion showed lower palatal width and longer palatal length compared to those with Class I and Class III. For palatal height, Class III malocclusion subjects in mixed dentition exhibited a larger number than Class II and Class I. Lastly, for palatal volume, compared to other malocclusions, Class III showed higher results; however, there were no significant differences. The form of the palate differs in types of malocclusions and understanding of these differences is important in clinical significance. Based on this study, the understanding of the relationship between the shape of the palate and the skeletal pattern provides useful information about orthodontic treatment plans, early diagnosis of malocclusion, and morphological integration mechanisms. Orthopedic treatment in the maxilla should be performed during early and intermediate mixed dentition to enhance treatment efficiency.

• The korean journal of orthodontics
• /
• v.40 no.4
• /
• pp.250-259
• /
• 2010

Objective: Intraoral noncompliance upper molar distalization techniques have gained in popularity and have subsequently found to be successful in Class II correction. The aim of the present study was to introduce a screw supported intraoral distalization appliance and investigate its efficiency. Methods: Twenty-one subjects (11 females, 10 males; average age of 14.9 years) with Angle Class II malocclusion participated in this study. Two screws were inserted behind the incisive foramen and immediately loaded to distalize the upper first molars. An intraoral screw supported distalization appliance was used to distalize the upper molars in order to achieve a Class I molar relationship. Skeletal and dental changes were evaluated using cephalometric and three-dimensional (3D) model analysis. Results: Upper molars were distalized 3.95 mm on average and a Class I molar relationship was achieved without any anchorage loss. The upper molars were tipped only $1.49^{\circ}$ and the upper right and left molars were rotated only $0.54^{\circ}$ and $0.74^{\circ}$ respectively which were statistically non-significant (p > 0.05). Conclusions: The newly designed screw supported noncompliance distalization appliance was found to be an effective device for achieving bodily molar distalization without any anchorage loss.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.1
• /
• pp.26-33
• /
• 2012

Purpose: The golden ratio has been used for a long time to objectify and quantify 'beauty'. Dr. Marqurardt claims that the golden ratio can be applied in the maxillofacial field as well. The purpose of this study was to evaluate the diagnostic significance of using a facial 'phi' mask for analyzing Korean faces with characteristics of Class I, II, and III malocclusion. Methods: We studied twenty five Korean celebrities' frontal facial photos (10 males, 15 females) and 90 malocclusion patients' frontal facial photos (30 patients in each malocclusion classification: Class I, Class II, and Class III). Patients who received orthodontic treatment at Samsung Medical Center were selected for this study. After superimposition of the selected facial photo and facial 'phi' mask using Adobe Photoshop CS3, the ratio of the entire facial area, mid facial area, lower facial area and horizontal and vertical lengths were measured. Results: The facial ratio in photos of Korean faces showed larger vertical and horizontal ratios than the facial 'phi' mask with golden ratio, regardless of skeletal malocclusion (entire face: 115%, lower face: 125% larger than the mask). The results of the frontal photos of Class I, II, and III malocclusion patients using facial 'phi' mask showed that the vertical length and frontal face area was more significantly influenced by the area of the lower face than the midface. This means that the lower face has larger proportions in the facial areas. Conclusion: The ratio of facial 'phi' mask is matched with the ideal facial appearance that the contemporary Korean general public is seeking. Thus, the facial 'phi' mask may be a convenient tool for esthetic analysis of Korean faces. Reducing the area of the lower face is esthetically more desirable for almost all Korean people when planning orthognathic surgery.

• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.861-869
• /
• 1994

The purpose of this study was to investigate the relationship of nose profile with respect to skeletodental pattern, by measured and analyzed statistically the lateral cephalograms of 95 females (13 to 30 years old). Tge results were summerized as follows ; 1. The antero-posterior factors of the nose - nasofrontal angle, nasofacial angle, and dorsal length / ala length ratio were different among the malocclusion groups 2. There were no significant correlation between the the vertical nose factors and the skeletal factors 3. The Class I groups had a straight nose profile , the Class II groups had a convex profile ; the Class III groups had a concave profile.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.108-113
• /
• 2009

The functional regulator(FR) appliances act to remove the restrictive forces that prevent the normal maturation of the maxilla and mandible. FR appliances are different from other functional jaw orthopedic appliances(e.g., the twin block, bionator, and activator). $Fr{\ddot{a}}nkel$ has based his treatment philosophy on the concept that the capacity to regulate growth residues in the soft tissue environment, and that adequate space must be available for the proper development of the hard tissue. In class II malocclusion with mandibular retrusion, FR-II treatment is not only the change in the postural position of mandible, but also expansion of the dental arches. By balancing the neuromuscular environment, not only can severe malocclusions be treated successfully, but also the tendency toward relapse is minimized because the neural and soft tissue factors associated with the skeletal malocclusion have been addressed as well. We report cases using by FR-II that is applicated in cases of Class II malocclusion without fixed appliance, only FR-II and space supervision.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.577-585
• /
• 1995

This study has been performed to determine whether significant differences in the maxillary basal bone pattern exist between skeletal class II malocclusion and normal occlusion. Materials for the skeletal Class III sample consisted of lateral cephalometric roentgenograms and maxillary cast models of 29 adult individuals, 15 males and 14 females. The average age was 19.75 years with a range from 16.4 to 29.1 years. A normal control sample consisted of lateral cephalometric roentgenograms and maxillary cast models of 24 adult individuals, 13 males and 11 females. The average age was 24.25 years with a range from 20.8 to 29.4 years. The results of this study can be summarized and concluded as like follows. 1. In comparing sexual difference of maxillary basal bone morphology in skeletal Class III malocclusion, the following Parameters of males were found to be significally larger than those of females : inter first premolar width, inter molar width, oblique canine height, oblique molar height and maxillary basal bone perimeter. 2. In comparing sexual difference of maxillary basal bone morphology in normal occlusion, the following parameters of males were found to be significally larger than those of females : inter canine width, inter first and second premolar width, inter molar width, oblique canine height and oblique molar height. 3. In comparing maxillary basal bone morphologic difference between skeletal Class III malocclusion md normal occlusion in males, the following parameters were found to be significally larger in normal occlusion : inter canine width, inter canine height, inter molar height, oblique canine height and oblique molar height. 4. In comparing maxillary basal bone morphologic difference between skeletal Class III malocclusion and normal occlusion in females, the following parameters were found to be significally larger in normal occlusion : inter canine height, inter molar height, oblique canine height, oblique molar height and maxillary basal bone perimeter.