• The korean journal of orthodontics
• /
• v.40 no.5
• /
• pp.349-357
• /
• 2010

Objective: The purpose of this study was to evaluate the dentoskeletal and soft tissue profile changes after extraction of two lower first or second premolars in "borderline" adult skeletal Class III cases. Methods: Twenty-eight patients with "borderline" skeletal Class III malocclusion were studied. All of them were treated by extraction of two lower first or second premolars. Lateral cephalometric radiographs taken at the start and end of treatment were analysed. Twenty-five cephalometric variables were calculated and paired $t$-tests were performed. Results: After treatment, no significant changes were noted in the skeletal parameters ($p{\geq}0.05$). Regarding the dental parameters, the L1-MP angle decreased by $8.1^{\circ}$, the U1-L1 angle increased by $7.7^{\circ}$ ($p$ < 0.01), the overjet distance increased by 5.7 mm ($p$ < 0.01), the L1-NB angle decreased by $7.3^{\circ}$ and the L1-NB distance decreased by 4.8 mm ($p$ < 0.01). The soft tissue parameters of Li-E, Li-H and Li-RL2 distance decreased by 3.2 mm, 3.4 mm and 4.1 mm respectively ($p$ < 0.01). Conclusions: Orthodontic camouflage treatment by extraction of two lower first or second premolars provides a viable treatment alternative for "borderline" skeletal Class III cases to achieve a good occlusal relationship.

• The korean journal of orthodontics
• /
• v.37 no.1 s.120
• /
• pp.73-84
• /
• 2007

The maxillary protraction headgear has been widely used in the treatment of skeletal Class III children with maxillary deficiency. A variety of treatment objectives which allow dentoalveolar movements may be established, but when only maxillary protraction without dentoalveolar movement is needed, one of the limitations in maxillary protraction with conventional tooth-borne anchorage is the loss of dental anchorage. This is because a bone remodeling occurs not only at circummaxillary sutures but also within the periodontal tissues. During protraction treatment in the mixed dentition phase, in older children or for the patient with multiple congenitally missing teeth, it is not uncommon to observe undesirable mesial movement of maxillary teeth. Such a side effect can be eliminated or minimized using absolute anchorage such as skeletal anchorage. The purpose of this case report is to introduce a new technique of the maxillary protraction headgear treatment using surgical miniplates.

• The korean journal of orthodontics
• /
• v.50 no.1
• /
• pp.3-12
• /
• 2020

Objective: This study compared three prominent midsagittal planes (MSPs) to identify the MSP that best approximates the true symmetrical MSP. Methods: Forty-three patients (mean age, 23.0 ± 8.20 years) were grouped as follows: group 1 consisted of 10 patients with skeletal Class I and a menton (Me) deviation of < 2 mm; group 2, 11 patients with skeletal Class III and a Me deviation < 2 mm; group 3, nine patients with skeletal Class III and a Me deviation of 2 to less than 4 mm; and group 4, 13 patients with skeletal Class III and an Me deviation ≥ 4 mm. The candidate MSPs were established by three-dimensional (3D) cone beam computed tomography (CBCT) reorientation methods (RMs): (1) the MSP perpendicular to the Frankfort horizontal (FH) plane while passing through the crista galli and basion; (2) the MSP including the nasion, incisive foramen, and basion; (3) the MSP including the nasion, anterior nasal spine, and posterior nasal spine. The mean absolute distances (MADs) to the MSPs were calculated from the coordinates of 1,548 points on 129 CBCT images. The differences in the values of the 3D coordinates among RMs were compared. Results: The MADs of the three RMs showed significant differences (p < 0.05). Most of the differences in values of the coordinates were not significant among RMs. Conclusions: Although the differences in distance among the three MSPs were minor, the MSP perpendicular to the FH plane while passing through the crista galli and basion best approximated the true symmetrical MSP.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.694-699
• /
• 2001

The prognosis for class III patients in growing child can be made in mixed dentition and the severity of the symptom is often amenable to early intervention. Class III malocclusion can be classified as functional class lit and skeletal origin. Skeletal Class III malocclusion is usually characterized by overdeveloped mandible, underdeveloped maxilla, but the cause of pseudo class III is most dentoalveolar or functional shift of mandible. The primary goal of early intervention of malocclusion is to supply an environment that is conducive to the development of favorable occlusal relationships and avoiding of worsening of the problems. Inverted labial bow appliance is introduced as an appliance to combine the advantage of active plate and activator. It is undemanding with this appliance to initiate not only dentoalveolar expansion of upper dentition but also to orient the functional retrusion of mandible. With simple design the compliance for patients such as mouth breathing problem can be improved. For successful use of this appliance it is utmost important to make accurate and early diagnosis between pseudo- and skeletal class III malocclusion. This article will demonstrate the use of an Inverted labial bow appliance for early treatment of a functional Class III malocclusion. After 4 month treatment, anterior crossbite was treated and the results were achieved mainly dentoalveolar change of upper and lower anterior teeth.

• Korean Journal of Cleft Lip And Palate
• /
• v.14 no.1_2
• /
• pp.1-18
• /
• 2011

Skeletal malocclusion is the result of abnormal dimension and alignment of each skeletal component. Understanding on these mechanisms may help to elucidate the etiology of skeletal malocclusion and to establish population-oriented treatment plans. Attempts to subdivide the Angle's classification have been performed for Class III malocclusion, while few studies have been conducted for Class II malocclusion despite recent growing interests in Class II malocclusion. 200 adults (88 male, 112 female) with skeletal Class II malocclusion were collected and subdivided using cluster analysis, using the measurements representing the dimension and the alignment of each facial skeletal component. The properties of each cluster was grouped within the subjects and a comparison between the subjects and the control group (38 male, 35 female) with normal occlusion was performed. Six clusters were finally recognized in each male and female groups. The clusters in both genders were mainly characterized by the cranial base alignment, dimension of the posterior cranial base, dimension of the mandibular ramus and the degree of mandibular rotation. The results implicate that active treatment of mandible rather than the nasomaxillary complex may be primarily considered for the correction of Korean Class II skeletal pattern.

• The Journal of the Korean dental association
• /
• v.45 no.8 s.459
• /
• pp.483-490
• /
• 2007

The aim of this study was to investigate the relationship between the mandibular antegonial notch and the mandibular morphology, and the curve of Spee in anteroposterior skeletal relationship. Pre-treatment lateral cephalograms were obtained from 80(male 34, female 46) adult orthodontic patients and the samples were classified into 3 categories by ANB angle($0^{\circ}$$\leq$ANB< $4^{\circ}$ Class I, $4^{\circ}$$\leq$ANB Class II, ANB< $0^{\circ}$ Class III). The curve of Spee was measured directly from the pre-treatment mandibular study cast of each patient included in this study. Pearson correlation coefficient test and multiple regression analysis in each group revealed the following results; 1. Antegonial notch depth was positively correlated with hoth lower anterior facial height(ANS-Me) in skeletal Class I, II and III groups and Id-Me height in skeletal Class I and II groups. 2. A statistically significant negative correlation was found between the depth of the antegonial notch and the curve of Spee in the Class III group. 3. Significant relationship was not found between the antegonial notch depth and any of the other cephalometric variables such as mandibular body length(Go-Gn) and ramus height(Co-Go). As antegonial notch depth increased, more vertical growth of the mandible was observed. Antegonial notch can be used as a predictor of vertical mandibular growth in the diagnosis and treatment planning of malocclusion.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.1
• /
• pp.9-13
• /
• 2012

Introduction: To evaluate the 3-dimensional changes in the pharyngeal airway of skeletal class III patients after bimaxillary surgery. Materials and Methods: The study sample consisted of 18 Korean patients that had undergone maxillary setback or posterosuperior movement and mandibular bilateral sagittal split osteotomy setback surgery due to skeletal class III malocclusion (8 males, 10 females; mean age of 28.7). Cone beam computed tomography was taken 1 month before and 6 months after orthognathic surgery. Preoperative and postoperative volumes of the nasopharyngeal, oropharyngeal, and laryngopharyngeal airways and minimum axial areas of the oropharyngeal and laryngopharyngeal spaces were measured. Moreover, the pharyngeal airway volume of the patient group that had received genioplasty advancement was compared with the other group that had not. Results: The nasopharyngeal and laryngopharyngeal spaces did not show significant differences before or after surgery. However, the oropharyngeal space volume and total volume of pharyngeal airway decreased significantly (P<0.05). The minimum axial area of the oropharynx also decreased significantly. Conclusion: The results indicate that bimaxillary surgery decreased the volume and the minimum axial area of the oropharyngeal space. Advanced genioplasty did not seem to have a significant effect on the volumes of the oropharyngeal and laryngopharyngeal spaces.

• The korean journal of orthodontics
• /
• v.51 no.4
• /
• pp.250-259
• /
• 2021

Objective: The aim of this study was to compare the differences in mandibular posterior anatomic limit (MPAL) distances stratified by vertical patterns in patients with skeletal Class III malocclusion by using cone-beam computed tomography (CBCT). Methods: CBCT images of 48 patients with skeletal Class III malocclusion (mean age, 22.8 ± 3.1 years) categorized according to the vertical patterns (hypodivergent, normodivergent, and hyperdivergent; n = 16 per group) were analyzed. While parallel to the posterior occlusal line, the shortest linear distances from the distal root of the mandibular second molar to the inner cortex of the mandibular body were measured at depths of 4, 6, and 8 mm from the cementoenamel junction. MPAL distances were compared between the three groups, and their correlations were analyzed. Results: The mean ages, sex distribution, asymmetry, and crowding in the three groups showed no significant differences. MPAL distance was significantly longer in male (3.8 ± 2.6 mm) than in female (1.8 ± 1.2 mm) at the 8-mm root level. At all root levels, MPAL distances were significantly different in the hypodivergent and hyperdivergent groups (p < 0.001) and between the normodivergent and hyperdivergent groups (p < 0.01). MPAL distances were the shortest in the hyperdivergent group. The mandibular plane angle highly correlated with MPAL distances at all root levels (p < 0.01). Conclusions: MPAL distances were the shortest in patients with hyperdivergent patterns and showed a decreasing tendency as the mandibular plane angle increased. MPAL distances were significantly shorter (~3.16 mm) at the 8-mm root level.

• The korean journal of orthodontics
• /
• v.32 no.1 s.90
• /
• pp.33-42
• /
• 2002

This study was performed to compare the pattern of dentoalveolar characteristics in different vertical and anteroposterior skeletal types in skeletal Class III malocclusion. The samples selected for this study were consisted of 60 subjects(29 males and 31 females, mean age; 19.7 years) in Class III group, 43 subjects(14males and 29 females, mean age : 20.5 years) in normal group. The findings of this study were as follows : 1. The IMPA of the Class III group was smaller than that of the Class I group(p<0.01). 2. In the Class III groups, SNB and NtoPog had negative correlation with IMPA(p<0.01). The SNB and NtoPog had correlations with SNU1, FHU1 and PalU1(p<0.01) in the male samples, and in the female samples, the SNB and NtoPog had correlations with SNU1(p<0.01). 3. In the Class III male samples, SNMP, FMA, PalMP had negative correlation with IMPA(p<0.01). SNMP, FMA, PalMP had not significant correlation with SNU1, FHU1, PalU1. In the Class III female samples, FMA, PalMP had negative correlation with IMPA(p<0.01). 4. In the high angle group of Class III samples, SNU1, IMPA is smaller than that of low angle group of Class III samples(p<0.05).

• The korean journal of orthodontics
• /
• v.49 no.5
• /
• pp.326-337
• /
• 2019

Objective: The objective of this study was to develop new parameters based on the foramina of the trigeminal nerve and to compare them with the conventional cephalometric parameters in different facial skeletal types. Methods: Cone-beam computed tomography (CBCT) scans and cephalograms from 147 adult patients (57 males and 90 females; mean age, 26.1 years) were categorized as Class I ($1^{\circ}$ < ANB < $3^{\circ}$), Class II (ANB > $5^{\circ}$), and Class III (ANB < $-1^{\circ}$). Seven foramina in the craniofacial area-foramen rotundum (Rot), foramen ovale (Ov), infraorbital foramen, greater palatine foramen, incisive foramen (IF), mandibular foramen (MDF), and mental foramen (MTF)-were identified in the CBCT images. Various linear, angular, and ratio parameters were compared between the groups by using the foramina, and the relationship between the new parameters and the conventional cephalometric parameters was assessed. Results: The distances between the foramina in the cranial base did not differ among the three groups. However, the Rot-IF length was shorter in female Class III patients, while the Ov-MTF length, MDF-MTF length, and Ov-MDF length were shorter in Class II patients than in Class III patients of both sexes. The MDF-MTF/FH plane angle was larger in Class II patients than in Class III patients of both sexes. Most parameters showed moderate to high correlations, but the Ov-MDF-MTF angle showed a relatively low correlation with the gonial angle. Conclusions: The foramina of the trigeminal nerve can be used to supplement assessments based on the conventional skeletal landmarks on CBCT images.