• 대한전자공학회논문지SD
• /
• 제43권8호
• /
• pp.35-43
• /
• 2006

이 논문에서는 공정 변이의 고려를 위한 통계적 시간 분석(statistical timing analysis)에서 전력감소를 고려한 회로의 최적화를 위해 글리치 및 지연시간의 확률적 모델 및 연산을 이용하여 각 경로 및 경로상의 게이트의 민감도(sensitivity)를 계산하고 이를 이용한 사이징(sizing)을 통해 회로의 지연시간의 증가 없이 글리치를 감소하는 방법을 제시한다. 제안된 알고리즘은 통계적 시간 분석에 근거한 회로의 전후방 탐색을 이용하여 공정 변수를 고려한 확률적 글리치 발생률을 예측한다. 또한 글리치 발생률을 고려한 게이트의 선택 및 사이징 가능한 지연시간의 최적화된 계산을 통해 효율적인 게이트 사이징 기법과 글리치 감소를 위한 경로균등화 방법을 제시한다. 제안된 알고리즘의 효율성은 $0.16{\mu}m$ 모델 파라미터를 이용하여 ISCAS85 벤치마크 회로에 대한 실험을 통해 검증되었다. 실험 결과를 통해 제안된 알고리즘은 글리치 예측에 있어 8.6%의 정확도의 개선을 보였고, 경로균등화에 의한 최적화에 있어 9.5%의 개선을 보였다.

• 한국의류학회지
• /
• 제32권1호
• /
• pp.99-109
• /
• 2008

The purpose of this study was to survey sizing system and preferable ease and to decide the body measuring items for pattern making in a men's dress shirt for mass customization industry that is rising to the surface as a new production system. For this, it had a survey subjects were 254 males between 25 to 44 years old who wear dress shirt frequently and the relevant on line companies, and analyzed the garment sizing system and preferable ease. Collected data were analysed by frequency analysis, t-test, $X^2-test$, and ANOVA using SPSS 12.0 for window. Garment pattern making should reflect the sizes of the body parts well, and simplification of the ordering process would work as an important variable. In relation to the preferable ease, older people preferred more ease while younger people preferred fit ease. In relation to the sizes, people wearing the size of '110' preferred more ease than the size of '90'. And people weighing over 90kg preferred sufficient ease than less weighing. People height over 170cm people preferred sufficient ease for the length between shoulders than height under 170cm. In case of the companies had no consistent sizing system. Significant difference was found in the sizes, except for the size of '100', among those companies, there was significant difference in the length between shoulders and the length of the shirt among those companies and those sizes. Significant body parts for a garment pattern making was height, the circumference of the neck, the chest circumference, the length between biacromion, the arms length, and the waist circumference.

• 한국항행학회논문지
• /
• 제23권1호
• /
• pp.44-54
• /
• 2019

많은 나라들에서 늘어가는 자동차로 인한 교통체증에 대체 할 수 있는 새로운 교통수단에 대한요구가 증가하고 있다. 또한, 경제적인 성장으로 인한 자동차 보유 대수의 증가로 앞으로 교통체증은 더욱 증가할 것이다. 이를 위해 도로주행형 개인용 항공기(PAV; personal air vehicle)에 관한 많은 연구가 진행되고 있다. 본 연구에서는 도로주행형 PAV의 사이징에서 엔진과 익형의 종류에 따른 주요 설계 변수인 익면하중과 동력대중량비를 구하기 위한 사이징을 수행하였다. 즉, 사이징 과정에서 국내 환경과 일반 항공기급 인증기준인 FAR PART 23을 고려한 임무형상에 대하여 익면하중, 동력대중량비, 제동마력, 그리고 연료효율의 그래프를 통해서 설계점을 결정하는 연구도 수행하였다. 사이징 결과 디젤 엔진을 사용하는 경우 가솔린 엔진보다 더 큰 중량으로 인해 더 큰 이륙총중량, 날개 면적, 그리고 더 큰 동력을 요구한다.

• 한국항행학회논문지
• /
• 제22권2호
• /
• pp.111-122
• /
• 2018

현재 우리나라를 포함한 다수의 국가에서 지상 교통수송 체계가 포화상태에 이르렀다. 이를 해결하기 위해 교통체계의 3차원 화로 교통체증을 완화하고 door-to-door 이동성을 달성하고자 도로주행형 개인용 항공기 (PAV; personal air vehicle)에 관한 많은 연구가 진행되고 있다. 본 연구에서는 도로주행형 PAV의 사이징에서 지상 활주거리, 상승률, 최대 순항속도, 최대 상승고도, 실속 속도 등의 구속조건하에서 주요 설계 변수인 추력대중량비, 익면하중, 동력대중량비를 구하기 위한 구속조건 해석을 수행하였다. 또한 사이징 과정에서 국내 환경과 일반항공기급 인증기준인 FAR PART 23을 고려한 임무형상에 대하여 추력대중량비, 익면하중, 동력대중량비, 그리고 제동마력의 그래프를 통해서 설계점을 결정하는 연구도 수행하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.209-210
• /
• 2007

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1278-1279
• /
• 2006

New product line with additional secondary operation of oil pump rotor was built in necessity of increasing capacity. This new line includes steam treatment process after sizing. The new line achieved 1.6 times higher performance compared with a conventional line.

• Journal of Electrical Engineering and information Science
• /
• 제3권2호
• /
• pp.230-238
• /
• 1998

When size and shape of moving object have been changed, a correlator often accumulates walk-off error. A success of correlation-based tracking largely depends on choosing suitable window size and position and thus transferring the proper reference image to the next frame. For this, we propose the Adaptive Window Algorithm with Four-Direction Sizing Factors (AWA-FSF) for fast adjusting a reference region to enhance reliability of correlation-based image tracking in complex cluttered environments. Since the AWA-FSF is capable of adjusting a reference image size more rapidly and properly, we can minimize the influence of complex background and clutter. In addition, we can finely tune the center point of the reference image repeatedly after main tracking process. Thus we have increased stability and reliability of correlation-based image tracking. We tested performance of the AWA-FSF using 45 real image sequences made of over 3400 images and had the satisfied results for most of them.

• 산업경영시스템학회지
• /
• 제32권3호
• /
• pp.29-39
• /
• 2009

In an environment of global competition, the success of a manufacturing corporation is directly related to how it plans and executes production in particular as well as to the optimization level of its process in general. This paper proposes a production planning algorithm for the Multi-Level, multi-item Capacitated Lot Sizing Problem (MLCLSP) in supply chain network considering back-order. MLCLSP corresponds to a mixed integer programming (MIP) problem and is NP-hard. Therefore, this paper proposes an effective algorithm, GRHS (GRASP-based Rolling Horizon Search) that solves this problem within reasonable computational time and evaluates its performance under a variety of problem scenarios.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1029-1032
• /
• 2001

The purpose of this paper is to establish an automated die design system for compacting and sizing process required in Powder Metallurgy. Though the Powder Metallurgy(P/M) is a practical and economical forming technology, it needs long time and many trials and errors for die design. Such a problem can be solved by introduction of the automated die design system for P/M. In order to establish the system, collecting, classifying, and systematizing related knowledges from the experts in industries, books, and papers were performed. The system was constructed by AutoLISP, the language operated in AutoCAD atmosphere. This language can efficiently support for user to work on drawings. There are three modules ; P/M part specification input module, P/M part design module, and Die design module. A part for vehicle was applied to the system and satisfied results were achieved.

• 펄프종이기술
• /
• 제40권3호
• /
• pp.30-35
• /
• 2008

Mechanical properties of paper mulberry bast fiber handsheets were investigated to study the characteristics of bast fiber in terms of being suitable for modern paper making process. Tensile, tear and burst strength of handsheets made from bast fiber of paper mulberry were better than those of NBKP handsheets. Smoothness of bast fiber was higher but stiffness was lower than NBKP. Sizing performance of bast fiber were worse. 3D image analysis showed that handsheets of bast fiber had inferior formation and more pores comparing to NBKP.