• 펄프종이기술
• /
• 제42권4호
• /
• pp.71-77
• /
• 2010

To utilize modified pulp fibers in papermaking system, it is necessary to evaluate the interaction between modified fibers and papermaking additives. Fluorescent whitening agent (FWA) is an important additive which has been widely used for production of writing and printing paper. We modified pulp fiber surface by Layer-by-Layer multilayering of polyelectrolytes, and investigated the interaction between these fibers and FWA used in internal addition or surface treatment. Pulp fiber with cationic surface charge showed a good affinity to internal FWA. For FWA in surface sizing agent, whiteness and brightness of paper was dependent on pickup weight and polyelectrolyte type. Pulp fibers with C-starch/PSS multilayer showed better optical properties than poly-DADMAC/PSS treatment. It indicated that polyelectrolyte type in Layer-by-Layer multilayering as well as a good affinity to FWA is important to get better whiteness and brightness.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.249-251
• /
• 2002

It is well known that the interaction and adhesion between the glass fiber(GF) and polymer matrix has a significant effect in determining the properties of fiber-reinforced materials. Therefore, it is one of most important to modify the surface of GF with an appropriate sizing. We investigated the treatment method of GF with coupling agent to improve the interaction of the interfacial regions, and then the correlation between interfacial property and interphase microstructure was examined in an attempt to realize a proper morphology around the GF surface.

• 한국염색가공학회지
• /
• 제9권4호
• /
• pp.28-38
• /
• 1997

Peach skin fabrics were washed by the general and ultrasonic washing systems using different conditions. The physical properties of the washed fabrics were estimated. The following results were obtained through experimental data and their analysis. The tensile properties were changed due to fabric running speed and washing methods. The lower the running speed, the higher the extensibility and resilience and the lower the linearity and tensile energy. In the general washing method, the extensibility and resilience had lower values than those of the ultrasonic washing method and the linearity and tensile energy had the higher values than those of the ultrasonic washing system. The bending properties, bending moment and histeresis, were estimated. These values were generally lower in the ultrasonic washing system than those of the general washing system. The faster the washing speed, the higher the value of hysterisis. The shear properties were affected by the fabric running speed and washing methods. Shear stiffness and hysteresis of shear forces increased according to the increase of the fabric running speed. The values were higher in the general washing system than those of the ultrasonic washing system. The compressional energy was affected by the fabric running speed. The higher the fabric speed the higher the compressional energy. The ultrasonic washing system had lower compressional energy than the general washing system. The higher the running speed, the lower the coefficient of friction and geometrical roughness. The values of geometrical roughness were infienced by the removal of the sizing agent. The higher the remaining sizing agent, the higher the fabric weight and the thicker the thickness of fabric.

• 패션비즈니스
• /
• 제4권4호
• /
• pp.135-151
• /
• 2000

The porpose of this research is helping product developments and establishment men's marketing strategies. This contents are divided into two parts; the dress shirt's wearing condition and the dress shirt's buying condition. The subjects of the research were male that aged 25-50 and their company is resided in Seoul. The conclusion of this research is summarized as below ; 1. Many consumers have wrong term recognition of dress shirt. Most of men know their dress shirt's sizing designation as casual method(ex, $\cdots$95, 100$\cdots$). Therefore it is happened fitness complains. Dress shirt's wearing frequency for a week is 1-2 days or 5days mostly. A number of dress shirt’s wearing period for one is 6-12 months. Dress shirt‘s wearing frequency fand wearing period varies according to their age, unmarried or married situation, scholarship, occupation. So the manufacturer of men's dress shirt grasps the factor's for their character. 2. The conclusion of dress shirt's buying motivation is need better than impulse buying. If company planning season event, the selling will be improved. Most of men buy their dress shirt by themselves. It means a lot of men are interested in their clothes comparing to old days. And men's favorite purchase place is a department store and agent. when they purchasing, the color and size is very important factor. But dress shirt's sizing designation is not yet established. Therefore the dress shirt's sizing designation is needed as possible.

• 펄프종이기술
• /
• 제46권1호
• /
• pp.11-17
• /
• 2014

This study analyzed the effects of specific factors on the fluorescence index of the fluorescent whitening agent (FWA) that is used for internal addition. The specific factors were identified by the literature review, and a statistical survey was carried out to analyze the effects of those factors on the fluorescence index. Bulk, grammage, fillers and internal sizing agents were selected as the specific factors. The paper samples were prepared with internal FWA in a laboratory. The fluorescence indices of the model papers were measured, and p-values of the specific factors on the fluorescence index were calculated by the SPSS program. Most of p-values were greater than 0.05, so the specific factors do not have a significant impact on the internal FWA fluorescence index.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.444-452
• /
• 2000

Dense composites of titanium matrix and Al2O3 matrix with reinforcements of carbon or titanium carbide fibers were successfully fabricated by high-pressure self-combustion sintering method or combustion reacton under 30 MPa of uniaxial pressure with an aid of external heating in vaccum. It was found that the fibers were uniformly distributed in the matrix, and aligned in a phase perpendicular to the pressure axis. As a moel ratio of Ti/C or reaction time increased, the density of Ti-matrix composite increased Micro pores around fibers could be removed by using clean carbon fibers without sizing agent on their surface. The evolution of carbide fibers from carbon fibers was observed. The composition of the various phases around fibers were analyzed.

• 한국염색가공학회지
• /
• 제10권1호
• /
• pp.43-50
• /
• 1998

In order to investigate the effect of contained impurities of polyester fiber fabric on the scouring and dyeing property, 3 kinds of polyester fabrics were heat-set treated at $160-200^\circ{C}$ and evaluated its scouring and dyeing property by through with soxhlet extraction and K/S value of the dyed fabric derived from the surface reflectance. The impurities such as oiling and sizing agent are adhered more strongly on the polyester fabric surface by heat setting temperature. In scouring test, the removal of the these re-adhered impurities on the polyester fabric is very difficult in comparing with unheat-set treated polyester fabric. It is also confirmed that the remained impurities on the polyester fiber decreased its dyeing property.

• 한국잠사곤충학회지
• /
• 제13권1호
• /
• pp.69-72
• /
• 1971

1. 연감시료량의 적정량을 알아보기 위해 200, 100, 50, 20, 10gr의 생사시료를 연감검사한 결과 각처리간에는 통계적차이를 인정할 수 없었으나 실제로 시료량의 과대 과소에 따른 측정 및 처리오차를 감안할 때 100gr 시료가 적정량이었다. 2. 섬도사를 이용하여 연감검사를 할 경우 꼬인 상태와 풀은 상태로 연감처리할 경우 탄산나트륨같이 제교력이 강한 정연제에서는 차이가 없었으나 Marseilles 비누같이 제교력이 약한 것은 연감율에 있서 현저한 차이가 있었다. 3. 5종의 정연제를 비교한 결과 합성세제와 국산 Marseilles비누와 통계적 유의차를 인정 할 수 없으므로 이와의 대체 이용이 가능하다. 4. 정연제의 제교력은 대체로 정연액의 PH가 클수록 크고 작을수록 작은 경향이 있다.

• 공업화학
• /
• 제10권3호
• /
• pp.336-342
• /
• 1999

탄소섬유 복합재료의 계면강도 증가를 위하여 탄소섬유의 표면처리에 대한 많은 연구가 이루어져 왔다. 기존의 상업적인 표면처리의 경우 탄소 섬유 표면 산화처리 후 수분산성 에폭시계 유기화합물을 코팅 (사이징처리)하여 탄소섬유에 에폭시 기지와의 상용성과 취급 용이성을 부여하고 있다. 이러한 재료로 제조된 탄소섬유 복합재료는 높은 층간 전단 강도를 나타내나 충격강도는 다소 낮은 특성을 가지고 있다. 본 연구에서는 탄소섬유 표면 산화 처리 후 기존의 사이징 처리 대신에 반응성과 유연성이 있는 계면상 (interphase)을 도입하여 복합재료의 층간전단강도와 충격강도를 향상시키고자 하였다. 탄소섬유의 전기전도성을 이용하여 이온화가능하고 연성을 가진 고분자인 MVEMA (poly (methyl vinyl ether-co-maIeic anhydride))와 EMA (poly (ethylene-co-maleic anhydride))를 수용액상에서 탄소섬유 표면에 전착 시키는 방법을 사용하였다. 전착에 의해 MVEMA 또는 EMA가 $0.1{\sim}0.2{\mu}m$ 두께로 얇게 코팅된 탄소섬유, 상용의 탄소섬유, 사이징처리를 하지 않은 탄소섬유로 복합재료를 제조하여 물성을 비교 평가하였다. 계면상의 두께가 얇을수록 층간전단강도가 증가하였으며, 충격강도는 감소하였는데, 계면상의 최적두께는 $0.1{\mu}m$ 정도였다. MVEMA 계면상을 도입한 경우가 상업적으로 표면처리 한 경우보다 층간전단강도의 경우 약 20% 정도 증가하였고 Izod 충격강도의 경우 약 50% 정도 증가하였다. MVEMA 계면상을 도입한 경우 복합재료의 흡습률이 높았다.

• 펄프종이기술
• /
• 제37권2호
• /
• pp.70-77
• /
• 2005

For the purpose of developing liner board for water resistant corrugated board in the cold chain system, several types of base paper for corrugated board were purchased from the market and 6 different boards were produced in the mill by applying the chemicals, chosen in the previous studies, on the base paper. Then water-moisture resistance and physical properties of the boards were compared each other. The liner board which is dried at high temperature with pressure by Condebelt (CK paper) showed a superior performance in strength over common liner boards. Strength of the board increased by surface chemical treatment up to $60\%$ of compressive strength and $30\%$ of burst strength. Starch insolubilization with Ammonium Zirconium Carbonate and surface coating with a surface sizing agent and a moisture resistant chemical on CK paper showed the best result. Therefore this method was recommended to produce the outer liner board for water resistant corrugated board.