• The Research Journal of the Costume Culture
• /
• v.11 no.5
• /
• pp.647-656
• /
• 2003

Mass customization utilizes the new computer technologies, supply chain management, product information management, and some level of customization of the product for the individual customer. This study aimed at grasping the actual conditions of mass customization of domestic men's suit industry and the use of MTM CAD program. The MTM apparel production programs that are used by five leading men's suit manufacturers in Korea were compared. The results of the study showed that most of the manufacturers produced mass customized men's suits to supply extraordinarily large or small size suit based on the individual order. The information listed on an order sheet used at shops was not necessarily corresponding to the information in the MTM CAD program that is use for production of suit ordered from the shop. The pattern data base on the MTM CAD program are constructed based on the sizing system of individual manufacturer. The most manufacturers translated the customer's body dimensions into difference between the standard pattern and the customer's needed adjustment.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.72-83
• /
• 2002

Required power and solar array sizing of KOMPSAT-2 have been analyzed by ASTRIUM and KARI in November, 2000. There are Electrical Power Subsystem(EPS) design discrepancies between ASTRIUM and Korea Aerospace Research Institute(KARI) according to heritage program, EPS operation concepts, power source and the characteristic of the electrical boxes. To design the power system of KOMPSAT-2, ASTRIUM has used the EPS design of the CHAMP and GlobalStar program. But SSTI, TOMS-EP and KOMPSAT-1's design concepts has been used for KOMPSAT-2 EPS design by the KARI. To get the design conclusion, there are many trade-off meetings for the EPS sizing using each sides' heritage program and EPS operation concept. And the EPS design factors and approaching methods have been reviewed and discussed. In addition the EPS design results from ASTRIUM and KARI are summarized in this paper.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.135-158
• /
• 2006

The purpose of this study was to provide for the useful fundamental data by developing an appearl sizing system according to body types for Chinese Adult Female. Thus, it was to improve of fittness and coverage rate of exporting domestic clothing to China. For study, It was measured 1360 female women aged between 19 and 50 who resident in Beijing and Shanghai in China. as a sample, 1381 female women was seleted for development of apparel sizing system. Thus, this study was to characterize body types of Chinese adult female by classifying them into groups and set coverage rate of ready-made clothes by developing an apparel sizing system according to the Women's Wear Specifications(GB/T 1335.2-1997), National Standards of People's Republic of China. As for the method of this study was done during Jun. 23 $\sim$ Aug. 7, 2004. Data analysis were processed by SPSS WIN 10.0 Program was used to for technical statistical analysis. The result was as follows: The clothes dimension for upper and lower body and the coverage rate of body size that had the highest appearance ratio from the entire group was Y-type 160-84$\cdot$160-64(4.6%) and the section 160cm 32.4%, A-type 160-88$\cdot$160-72(3.3%) and the section 160cm 28.1%, B-type 155-88$\cdot$155-78(3.8%) and the section 155cm 27.8%, C-type 150-96$\cdot$150-88(2.5%). The result By setting of representative size number and production coverage rate for Chinese adult female. The representative size number of the entire group was set for 150-80A$\cdot$150-64A(1.0%), 155-84A$\cdot$155-68A(2.6%), 160-88A$\cdot$160-72A(3.3%), 165-84A$\cdot$165-68A (2.8%), 170-96A$\cdot$170-80A(0%). The production coverage rate for each representative size number was SS size the section 150cm 2.8%, size the section 155cm 17.0%, M size the section 160cm 31.6%, L size the section 165cm 25.0%, XL size the section 170cm 12.6% that covered 85.0%.

• Journal of Convergence for Information Technology
• /
• v.11 no.10
• /
• pp.36-44
• /
• 2021

Estimation on SW Sizing applied to fintech is very difficult, a task requiring long time, it is difficult for client companies and developer companies to accurately calculate the size of software development. The size is generally estimated based on the experience of project managers and the general functional scoring method. In this paper, propose a model that can be applied to fintech development projects by quantitatively calculating the required functions from the user's point of view, measuring the scale, and calculating the scale in real time. Through the proposed model, the amount of work can be estimated prior to development and the size can be measured, and the M/M and the estimated quotation amount can be calculated based on the program list by each layer. In future studies, by securing size computation data on existing the Fintech Project in mass, research on accurate size computation would be required.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.1-12
• /
• 2009

In recent years, integration of new distributed generation (DG) technology in distribution networks has become one of the major management concerns for professional engineers. This paper presents a dynamic methodology of optimal allocation and sizing of DG units for a given practical distribution network, so that the cost of active power can be minimized. The approach proposed is based on a combined Genetic/Fuzzy Rules. The genetic algorithm generates and optimizes combinations of distributed power generation for integration into the network in order to minimize power losses, and in second step simple fuzzy rules designs based upon practical expertise rules to control the reactive power of a multi dynamic shunt FACTS Compensator (SVC, STATCOM) in order to improve the system loadability. This proposed approach is implemented with the Matlab program and is applied to small case studies, IEEE 25-Bus and IEEE 30-Bus. The results obtained confirm the effectiveness in sizing and integration of an assigned number of DG units.

• Journal of Energy Engineering
• /
• v.12 no.2
• /
• pp.84-92
• /
• 2003

A one-dimensional thermal-hydraulic analysis computer program is developed for thermal sizing of a copper bonded steam generator. It is assumed that the conduction heat transfer of copper region between the hot side and the cold side tube is one-dimensional and its thermal resistance is derived as a function of a tube pitch. The flow regions of the water/steam side are divided into four regions: subcooled, saturated, film boiling, and super-heated. The number of tube selected ranges from 250 to 3500 and the pitch to tube diameter (P/D) ratios are 1.4, 1.6 and 1.8 for the parametric study calculation. The calculation results showed that when the number of tube was 2500, the length of the heating tube was about 12 m and the outside diameter of the steam generator was about 3 m. If the P/D ratio increases, the thermal resistance of copper component also increases, however the length of the heating tube is not so much increased.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.3
• /
• pp.248-255
• /
• 2009

After several damages by PWSCC were found in the world, USNRC and PNNL(Pacific Northwest National Laboratory) started the research on PWSCC under the project name of PINC. The aim of the project was 1) to fabricate representative NDE mock-ups with flaws to simulate PWSCCs, 2) to identify and quantitatively assess NDE methods for accurately detecting, sizing and characterizing PWSCCs, 3) to document the range of locations and morphologies of PWSCCs and 4) to incorporate results with other results of ongoing PWSCC research programs, as appropriate. Korea nuclear industries have also been participating in the project. Thermally and mechanically cracked-four mockups were prepared and phased array and manual ultrasonic testing(UT) techniques were applied. The results and lessons learned from the preliminary RRT are summarized as follows: 1) Korea RRT teams performed the RRT successfully. 2) Crack detection probability of the participating organizations was an average 87%, 80% and 80% respectively. 3) RMS error of the crack sizing showed comparatively good results. 4) The lessons learned may be helpful to perform the PINC RRT and PSI /ISI in Korea in the future.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1275-1283
• /
• 1999

본 논문은 CMOS 디지털 회로에서의 전력 소모의 주원인인 신호의 천이중에서 회로의 동작에 직접적인 영향을 미치지 않는 불필요한 신호의 천이인 글리치를 줄이기 위한 효율적인 알고리즘을 제시한다. 제안된 알고리즘은 회로의 지연 증가 없이 게이트 사이징과 버퍼 삽입에 의해 경로 균등(path balancing)을 이룸으로써 글리치를 감소시킨다. 경로 균등화를 위하여 먼저 게이트 사이징을 통해 글리치의 감소와 동시에, 게이트 크기의 최적화를 통해 회로 전체의 캐패시턴스까지 줄일 수 있으며, 게이트 사이징 만으로 경로 균등화가 이루어지지 않을 경우 버퍼 삽입으로 경로 균등화를 이루게 된다. 버퍼 자체에 의한 전력 소모 증가보다 글리치 감소에 의한 전력 감소가 큰 버퍼를 선택하여 삽입한다. 이때 버퍼 삽입에 의한 전력 감소는 다른 버퍼의 삽입 상태에 따라 크게 달라질 수 있어 ILP (Integer Linear Program)를 이용하여 적은 버퍼 삽입으로 전력 감소를 최대화 할 수 있는 저전력 설계 시스템을 구현하였다. 제안된 알고리즘은 LGSynth91 벤치마크 회로에 대한 테스트 결과 회로의 지연 증가 없이 평균적으로 30.4%의 전력 감소를 얻을 수 있었다.Abstract This paper presents an efficient algorithm for reducing glitches caused by spurious transitions in CMOS logic circuits. The proposed algorithm reduces glitches by achieving path balancing through gate sizing and buffer insertion. The gate sizing technique reduces not only glitches but also effective capacitance in the circuit. In the proposed algorithm, the buffers are inserted between the gates where power reduction achieved by glitch reduction is larger than the additional power consumed by the inserted buffers. To determine the location of buffer insertion, ILP (Integer Linear Program) has been employed in the proposed system. The proposed algorithm has been tested on LGSynth91 benchmark circuits. Experimental results show an average of 30.4% power reduction.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.12
• /
• pp.1057-1065
• /
• 2000

A sizing of sensible and latent energy recovery system with condensing heat exchanger is important to the design of a thermally controlled facilities. The transient system simulation program TRNSYS 14.2/IISiBat has been used to evaluate the energy consumptions of a thermally controlled facilities which consist of boiler, chiller and condensing heat exchanger, The boiler and chiller are selected based on the annual peak loads and controlled to maintain the setting temperature of $14~17^{\circ}C$. Simulation shows that the amount of sensible and latent energy recovered by heat exchanger is almost 20% of total heating load.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.1
• /
• pp.61-67
• /
• 2015

Recently, the initiation of outside diameter stress corrosion cracking (ODSCC) at the tube support plate region of domestic steam generators (SG) with Alloy600 HTMA tubes has been increasing. As a result, SGs with Alloy600 HTMA tubes must be replaced early or are scheduled to be replaced prior to their designed lifetime. ODSCC is one of the biggest threats to the integrity of SG tubes. Therefore, the accurate evaluation of tube integrity to determine ODSCC is needed. Eddy current testing (ECT) is conducted periodically, and its results could be input as parameters for evaluating the integrity of SG tubes. The reliability of an ECT inspection system depends on the performance of the inspection technique and abilty of the analyst. The detection probability and ECT sizing error of degradation are considered to be the performance indices of a nondestructive evaluation (NDE) system. This paper introduces an optimized evaluation method for ECT, as well as the sizing error, including the analyst performance. This study was based on the results of a round robin program in which 10 inspection analysts from 5 different companies participated. The analysis of ECT sizing results was performed using a linear regression model relating the true defect size data to the measured ECT size data.