• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1864-1871
• /
• 2012

This paper proposes the hybrid proportional integral(HBPI) controller for maximum power point tracking(MPPT) control of photovoltaic system. The output characteristics of the solar cell are a nonlinear and affected by a temperature, the solar radiation and influence of a shadow. The MPPT control is a very important technique in order to increase an output and efficiency of the photovoltaic system. The conventional constant voltage(CV), perturbation and observation(PO) and incremental conductance(IC) are the method which finding maximum power point(MPP) by the continued self-excitation vibration, and uses the fixed step size. If the fixed step size is a large, the tracking speed of maximum power point is faster, but the tracking accuracy in the steady state is decreased. On the contrary, when the fixed step size is a small, the tracking accuracy is increased and the tracking speed is slower. Therefore, in order to solve these problems, this paper proposes HBPI controller that is adjusted gain of conventional PI control using fuzzy control, and the maximum power point tracks using this controller. The validity of the controller proposed in this paper proves through the results of the comparisons.

• Journal of Korea Multimedia Society
• /
• v.24 no.2
• /
• pp.267-273
• /
• 2021

Recently, the small-size mobile robots with remote-control are rapidly growth which market of mobile is increased in the world. Especially, the smart-phones are widely used for interface device in the small size of a mobile robot. The research goal is control system design which is applied to miniaturization of a mobile robot using smart-phone and it can be confirmed performance for designed system. Meanwhile, the fabrication of mini-mobile robot can also be remote-control operation through the WIFI performance of a smart-phone. The smart-phone is used to remote-control for robot operation which control data transmit to robot via the WIFI network. To drive the robot, we can observe by the smart-phone screen and it can easily adjust the robot drive condition and direction by smart-phone button. Consequentially, there was no malfunction and images were printed out well. However, in drive, because of blind spot, robot was bumped into obstacle. Therefore, the additional test is necessary to sensor for blind spot which sensor can be equipment to mobile robot. In addition, the experiment with robot object recognition is needed.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.3851-3852
• /
• 2011

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.16-24
• /
• 2000

In this paper the performance of a closed-loop power control scheme using variable step size decision method for DS/CDMA based-low earth orbit(LEO) mobile satellite systems in which the long round trip delay is a dominant performance degradation factor is evaluated. Because there are fundamental differences in the characteristics between the LEO mobile satellite channel and terrestrial mobile channel, such as long round trip delay and different elevation angle, these factors are considered in channel modeling based on the European Space Agency(ESA) measurement data. Since the round trip delay (from the mobile terminal to the gateway station via satellite) is typically 10∼20ms in low altitude satellite channels, closed-loop power control is much less effective than it is on a terrestrial channel. Thus, the adaptive power control scheme using a variable step size control is essential for overcoming the long round trip delay and fading due to the elevation angle. It is shown that the standard deviation of signal to interference ratio(SIR) adopting a variable step size closed-loop power control scheme is much less than that of a fixed step size closed-loop power control. Furthermore, we have driven the conclusion that the measurement interval of power control commands is optimal choice when it is twice the round trip delay.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.12
• /
• pp.1711-1715
• /
• 2003

The experiment was designed on 42 non pregnant Black Bengal goat. Out of which 18 were subjected to a superovulatory treatment comprising of eCG and hCG for embryo transfer study. The remaining 24 goats received no treatment and served as control for parameter studied as well as recipient for embryo transfer studies. Important biochemical constituents such as acid and alkaline phosphatase, total protein and cholesterol and inorganic phosphorus were estimated in the follicular fluid of control and treated group and the values were separately recorded for small medium and large size follicle. The results indicated a significant effect on acid phosphotase activity due to size of follicle. The value increased progressively from small to medium and from medium to large follicles. Alkaline phosphotase activity showed reverse trend. Alkaline phosphotase decreased progressively as size increased. The concentration of inorganic phosphorus did not reveal any significant difference between the control and treatment groups and also between the different size follicles. The concentration of protein decreased significantly from small to medium and from medium to large, although no difference was observed between the control and treatment groups. The concentration of Cholesterol in the follicular fluid indicated a significant increase from small to medium and to large follicle. Here also no difference was observed due to treatment. Similar in the composition of follicular fluid in the respect of above mentioned constituents indicated no of super ovulatory treatment on follicular fluid composition.

• Journal of computational fluids engineering
• /
• v.19 no.1
• /
• pp.21-26
• /
• 2014

Butterfly valve is a valve that controls fluid flow depending on the size of the opening angle. In general, the size of the opening angle of the valve increases, the fluid flow has also increased sharply. However, sometimes, in a specific piping system, a particular operating condition is needed that the fluctuation of the fluid flow should not have large amount although the size of opening angle of the valve become larger. In butterfly value, the shape of a typical thin plate, it is impossible to control a minute fluid, but in thick plate type, it is possible. In this study, we got the fluid flow control characteristics and pressure drop through both a numerical method and an experimental method about thick plate type. The numerical result and experimental result of flow coefficient show a similar pattern. In addition, we could find that minute fluid flow control was possible in the area of small size of the opening angle.

• Nutritional Sciences
• /
• v.9 no.3
• /
• pp.173-178
• /
• 2006

The purpose of this study was to investigate the effects of wax gourd on body weight, body fat, triglyceride, leptin and fat cell size in rats fed medium fat Male Sprague Dawley rats were fed with experimental diet containing total dietary fat at 20% of calorie with wax gourd (WG) for 4 weeks. Forty rats were divided into 4 groups including control, 5, 10, and 15% (w/w) WG supplement The results showed that weight gain was significantly higher in 5% WG than that in control (p<0.05), but was not different among the WG supplement groups. Total fat weight was significantly decreased in both 10 and 15% WG supplement groups than that of control. The levels of triglycerides and free fatty acids in the plasma were significantly decreased, particularly in 15% WG supplement group (p<0.05). The levels of leptin was not significantly different among the experimental groups. Fat cell size was significantly decreased in WG supplement groups compared to that of control group (p<0.05). Correlation among the parameters demonstrated that weight gain correlated positively with total fat weight, the levels of leptin and triglycerides. Taken these results together, 15% WG supplement diet substantially reduces total fat weight, triglycerides and free fatty acids levels and fat cell size in the rat fed midium fat.

• Korean Journal of Community Nutrition
• /
• v.3 no.1
• /
• pp.21-33
• /
• 1998

The purpose of this study was to investigate the weight control attempts and related factors among 220 female college students in Seoul. Factors examined included body image, body satisfaction, interest in weight control, beliefs related to weight control, social norms, social expectations regarding subjects' body size and weight change. Data were analyzed using t-test and chi-square test(at $\alpha$=0.05). The average height and weight of subjects were 160.7cm, 52.2kg respectively. BMI and body fat(%) were 20.2 and 25.2%, respectively. One hundred seventy two students(78.2%) had attempted to control their weight, mainly to lose weight, and were categorized as the weight control attempt group. Subjects used diet modification as well as unhealthy method to control weight. 48.2% in the attempt group were underweight or normal weight(by BMI), suggesting that their weight control attempts were was unnecessary. Students in the attempt group described their own size as heavier than those in the no-attempt group(p<0.01) or other girls of their age(p<0.05) ; more dissatisfied with their body size(p<0.01), and showed more interest in weight control(p<0.01). Several differences in beliefs were also noted(p<0.001). The attempt group believed less strongly in the harmful effects or difficulties in weight control and believed more strongly in the advantages of weight control. With respect to social factors, the attempt group perceived that their family and friends wanted them to be smaller than they were(p<0.001), perceived that significant others felt that they should lose weight(p<0.05). These results suggest that educational programs for college female students should start focusing on the harmful effects of excessive dieting and information about desirable weight control methods. Students should be helped to have a correct body image. In addition, educational programs should incorporate strategies to change beliefs regarding weight control, as well as modifying social expectations from significant others.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.4
• /
• pp.107-116
• /
• 2006

The international standard to determine grounding conductor size can be applied for a wide range of items because it includes the specific physical characteristics, but it has a problem where the numerical formula is complicated. However the JIS and domestic standard numerical formula are simple but have many constraints. The new grounding conductor size selecting method is necessary in order to solve such problems. Therefore, in this study, we suggested an improved method for selecting the grounding conductor size and simple numerical formula with a numerical formula control modeling. and we verified reliability of paper used case study.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.12
• /
• pp.4326-4344
• /
• 2021

The SinGAN is one of generative adversarial networks that can be trained on a single nature image. It has poor ability to learn more global features from nature image, and losses much local detail information when it generates arbitrary size image sample. To solve the problem, a non-linear function is firstly proposed to control downsampling ratio that is ratio between the size of current image and the size of next downsampled image, to increase the ratio with increase of the number of downsampling. This makes the low-resolution images obtained by downsampling have higher proportion in all downsampled images. The low-resolution images usually contain much global information. Therefore, it can help the model to learn more global feature information from downsampled images. Secondly, the attention mechanism is introduced to the generative network to increase the weight of effective image information. This can make the network learn more local details. Besides, in order to make the output image more natural, the TVLoss function is introduced to the loss function of SinGAN, to reduce the difference between adjacent pixels and smear phenomenon for the output image. A large number of experimental results show that our proposed model has better performance than other methods in generating random samples with fixed size and arbitrary size, image harmonization and editing.