• Fisheries and Aquatic Sciences
• /
• v.26 no.10
• /
• pp.617-627
• /
• 2023

Harvest control rules have been recently developed for some fisheries in Indonesia, including grouper fisheries, and are expected to reverse the trend of declining stocks. One of the proposed options of the harvest control rules is to implement the catch size limit. The catch size limit approach, however, is challenging, unless it is supported also with strong fisheries surveillance, law enforcement, and innovation. The catch size limit approach can be done by implementing changes in fishing methods and gear, including the application of different hook sizes in the hook and line fishing gear. This study examines the impact of different hook sizes on the length at first capture (Lc) and on the bell-shaped maximum selectivity using various selectivity models of the two targeted grouper species (Plectropomus leopardus and Plectropomus maculatus) in the Saleh bay, West Nusa Tenggara, Indonesia. We found that increasing hook size influences the grouper's catch size, increasing the Lc and the bell-shaped maximum selectivity of both species. Based on our findings, hook size can be used as one of the practical tools for grouper management measures, as part of harvest control rules to improve grouper stock in Indonesia.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.373-378
• /
• 2012

The purpose of this study was to develop an electric riding machine for cycle fitting to control riding posture easily, to measure frame size quantitatively, and to overcome disadvantages of the traditional systems. The electric riding machine consisted of actuator, load controller, and display & control unit. The actuator unit by BLDC(BrushLess Direct Current) motor drives the saddle height up and down, the crank forward and backward, the handlebar up and down, and the handlebar forward and backward. The load controller unit controls loads by Eddy current controller with electromagnet and aluminum circular plate. The display & control unit consisted of frame size controller and display panel which shows top tube length(485~663mm), head tube length(85~243mm), seat tube length(481~671mm), and seat tube angle($62.7{\sim}76.4^{\circ}$). The range of frame size control for developed electric riding machine did not have difference compared to traditional commercial systems, but quantitative and precise control with 0.1 mm length and $0.1^{\circ}$ angle was possible through digital measurement. Unlike traditional commercial systems, frame size control was possible during riding through motor driven method, thus fitting duration decreased. It is necessary for further improvement to have feedback from users. It is believed that developed electric riding machine can help to develop domestic fitting system.

• Korean Journal of Community Nutrition
• /
• v.5 no.3
• /
• pp.444-451
• /
• 2000

This study was conducted to investigate how body size and weight control experience affect the nutrient intakes and the health status of adolescent females. The survey was carried out by self-questionnaires with 463 female high school and college students in Daegu. Analysis of data was done by using a t-test, and ANOVA with the SAS computer program. The average height, weight and BMI of the subjects were 161.2 cm, 53.4 kg, and 20.51 kg/$m^2$ respectively. However, 25.1% of the subjects belonged to the underweight group when we divided the subjects into 3 groups- underweight, normal-weight, overweight-according to their present body size. The average Fe intake of the subjects was less than 50% of the Korean recommended dietary allowances. The dietary intakes of energy and Vit. A were significantly higher in the underweight group than in other groups. However, no significant differences among body size groups were observed in the dietary habit score and the nutritional knowledge score. It also appeared that the dietary habit score and the nutritional knowledge score of the weight control attemptees were worse than those of the non-attemptees. The physical health status of the subjects significantly differed according to weight control experience, and the psychological health status of the subjects differed with present body size. The physical health condition of the weight control attemptees was worse than the non-attemptees. and the psychological health condition of the overweight group was worse than other groups. The results indicated that unnecessary weight control in adolescent females induces unhealthy food behavior which is linked to undesirable health status.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.120-125
• /
• 2007

In this paper a new cell sizing method is proposed. The new method calculates cell size at a point using given size control elements directly without the aid of background grid as other cell sizing algorithms do. The calculation method and related definitions are described in detail, and typical cell sizing results are given.

• Journal of the Korean Society of Costume
• /
• v.53 no.1
• /
• pp.117-128
• /
• 2003

For the advance of Korea's ready-made clothes industry into China, we need some information about the body types of the Chinese and the sizes of ready-made clothes. The purpose of this study is to prepare basic data about the reality and process of the size establishment of clothing sizes in China. The conclusions are as follows. 1. Clothing size establishment was made three times in 1981, 1991, and 1997. At present, the version of 'GB/T 1335-1997 Size' is used. 2. 'GB/T 1335-1997 Size' is composed as follows. \circled1 Based on the drop values of chest girth and waist girth, 4 (Y. A, B, C) body types of adult men and women were chosen. \circled2 Sizes contains Ho and Hyoung, 'Ho' refer to height (cm) and serve as the standard of length, while 'Hyoung' indicate chest girth (cm) and act as the standard of girth. \circled3 The size divisions of the 3 basic items for adults are 5cm (height), 4cm (chest girth), and 2cm (waist girth). So they are named '5ㆍ4, 5ㆍ2 size series', \circled4 For grading in dress production, approximate values to the means of the 2 basic items are called 'center types'.\circled5 Other necessary items for clothing design besides 3 basic items are named 'control items'. \circled6 For babies, children, and adolescents, no body type classification is established. Instead, size series are established according to body height.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.5
• /
• pp.55-61
• /
• 2010

When we design the control system used Programmable Logic Controller(PLC) by Sequential Function Chart(SFC), if we use a SFC, it is easy to know the sequential flow of control, to maintenance the controller and to describe a program. We program a SFC by a unique sequence, an alternative sequence and a parallel sequence. If we program a SFC by a alternative sequence, the memory size of a alternative sequence must be larger than the memory size of a unique sequence. Therefore this thesis show an efficient method to reduce a memory size and we confirmed its feasibility through actual example.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.42.3-42
• /
• 2001

A human is an expert in manipulation. We have acquired skills to perform dexterous operations based upon knowledge and experience attained over a long period of time. It is important in robotics to understand these human skills, and utilize them to bring about better robot control and operation It is hoped that the neurocontroller can be trained and organized by simply presenting human teaching data, which implicate human intention, strategy and expertise. In designing a neurocontroller, we must determine the size of neurocontroller. Improper size may not only incur difficulties in training neural nets, e.g. no convergence, but also cause instability and erratic behavior in machines. Therefore, it is necessary to determine the proper size of neurocontroller for human control transfer. In this paper, a new pruning method is developed, based on the penalty-term methods. This method makes ...

• Genomics & Informatics
• /
• v.7 no.3
• /
• pp.148-151
• /
• 2009

Generally, larger sample size leads to a greater statistical power to detect a significant difference. We may increase the sample size for both case and control in order to obtain greater power. However, it is often the case that increasing sample size for case is not feasible for a variety of reasons. In order to look at change in power as the ratio of control to case varies (1:1 to 4:1), we conduct association tests with simulated data generated by PLINK. The simulated data consist of 50 disease SNPs and 300 non-disease SNPs and we compute powers for disease SNPs. Genetic Power Calculator was used for computing powers with varying the ratio of control to case (1:1, 2:1, 3:1, 4:1). In this study, we show that gains in statistical power resulting from increasing the ratio of control to case are substantial for the simulated data. Similar results might be expected for real data.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.3
• /
• pp.284-292
• /
• 2008

The active control technique mostly uses the least-mean-square(LMS) algorithm, because the LMS algorithm can easily obtain the complex transfer function in real-time, particularly when the Filtered-X LMS(FXLMS) algorithm is applied to an active noise control(ANC) system. However, FXLMS algorithm has the demerit that stability of the control is decreased when the step size become larger but the convergence speed is faster because the step size of FXLMS algorithm is fixed. As a result, the system has higher probability which the divergence occurs. Thus the Co-FXLMS algorithm was developed to solve this problem. The Co-FXLMS algorithm is realized by using an estimate of the cross correlation between the adaptation error and the filtered input signal to control the step size. In this paper, the performance of the Co-FXLMS algorithm is presented in comparison with the FXLMS algorithm. Simulation and experimental results show that active noise control using Co-FXLMS is effective in reducing the noise in duct system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.598-603
• /
• 2007

The active control technique mostly uses the Least-Mean-Square (LMS) algorithm, because the LMS algorithm can easily obtain the complex transfer function in real-time, particularly when the Filtered-X LMS (FXLMS) algorithm is applied to an active noise control (ANC) system. However, FXLMS algorithm has the demerit that stability of the control is decreased when the step size become larger but the convergence speed is faster because the step size of FXLMS algorithm is fixed. As a result, the system has higher probability which the divergence occurs. Thus the Co-FXLMS algorithm was developed to solve this problem. The Co-FXLMS algorithm is realized by using an estimate of the cross correlation between the adaptation error and the filtered input signal to control the step size. In this paper, the performance of the Co-FXLMS algorithm is presented in comparison with the FXLMS algorithm. Simulation results show that active noise control using Co-FXLMS is effective in reducing the noise in duct system.