• 소성∙가공
• /
• 제33권4호
• /
• pp.270-276
• /
• 2024

In order to improve the performance of the PM (Particulate Matter) filter, the TPMS structure was used as a flow controller to control the flow entering the filter. Among various TPMS structures, a primitive structure that is easy to utilize 3D printing technique was selected and the effect of unit cell size was analyzed. In addition, numerical analysis was performed and swirl ratio was analyzed to confirm changes in filter inlet flow characteristics that affect changes in filter performance. Unit cell size is closely related to filter performance, and both PM collection efficiency and pressure drop increase as unit cell size decreases. Through quality factor (QF) comparison, which comprehensively evaluate collection efficiency and pressure drop, it was confirmed that when the unit cell size is 5 mm, PM collection efficiency increases, but the flow controller actually reduces filter performance. QF values are similar for unit cell sizes of 10 and 20 mm, and it is advantageous to select the unit cell size among these two considering collection efficiency and operating costs. The filter's collection performance increases due to the increase in swirl flow caused by the primitive structure, and the filter's collection efficiency increases due to the swirl flow that increases throughout the flow field as the unit cell size becomes smaller.

• 한국경제지리학회지
• /
• 제11권4호
• /
• pp.549-563
• /
• 2008

도시의 성장이 경제발전에 긍정적인 영향을 가져온다는 점에도 불구하고 아직까지 우리나라에서는 도시의 구조를 파악하기 위한 연구가 상당히 미흡한 실정이다. 본고에서는 도시 간 규모의 분포구조와 도시 내 인구밀도함수 등을 통한 내적구조를 새로이 정의한 광역도시통계권을 기준으로 살펴보았다. 먼저, 도시순위규모법칙의 계수분석을 통한 한국의 광역도시통계권 간 인구분포구조를 비교하였다. 한국은 서울광역도시통계권의 규모가 상대적으로 매우 크며 행정구역 상의 인구규모 분포보다 실질적으로 훨씬 집중되어 있다. 이는 서울광역도시통계권이 상대적으로 지나치게 거대하든가 혹은 부산이나 대구, 대전 광역도시통계권의 성장이 상대적으로 뒤떨어진 것으로 해석된다. 한편 지리정보프로그램(Arc GIS)을 이용하여 도시 내의 중심상업지역에서부터의 거리에 따른 인구밀도함수나 부동산가격 등을 통하여 도시의 내적구조를 분석하였다. 표준도시모델(Standard Urban Model)에 따르면 일반적으로 도심에서 외곽으로 갈수록 인구밀도와 부동산 가격이 하락하는 형태를 보이지만 서울광역도시통계권의 외곽에서는 상대적으로 다른 광역도시통계권과는 달리 그 하향곡선이 무척 완만하였고, 이는 결국 도심확산(Urban Sprawl)이 활발히 일어나고 있음을 의미한다. 한편, 울산, 광주권, 그리고 수원-화성-오산권에서 인구분포와 고용분포 간의 공간적 불일치 정도가 큰 편이고 대전권과 인천권에서 작은 편으로 나타났다. 이러한 도시의 구조에 대한 분석은 지역정책의 운용에 있어서 많은 시사점을 줄 수 있다.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.58-67
• /
• 2002

In this study copper chloride(CuCl$_2$) solution was used as raw material to produce the fine copper oxide powder which has less than 1 $\mu\textrm{m}$ average particle size and has uniform particle size distribution by spray pyrolysis process. In the present study, the effects of reaction temperature, the injection speed of solution and air, the nozzle tip size and the concentration of raw material solution on the properties of produced powder were studied. The structure of the powder became much more compact with increasing the reaction temperature regardless of copper concentration of the raw material solution. The particle size of the powder increased accordingly with increasing the reaction temperature in case of 30 g/$\ell$ copper concentration of the solution. The particle size of the powder increased accordingly, and the surface structure of the powder became more porous with increasing the copper concentration of the raw material solution. When copper concentration in raw material solution was more than 100 g/$\ell$, all produced powder was CuCl regardless of reaction temperatures. When copper concentration in solution was below 30 g/$\ell$ and reaction temperature was higher than 90$0^{\circ}C$, CuO was the main phase. The surface of the powder tended to become porous with increasing the injection speed of solution. Particle size was increased and the surface of the powder showed severely disrupted state with increasing the nozzle tip size. The particle size was decreased and the particle size distribution was more uniform with increasing the air pressure through the nozzle.

• Journal of electromagnetic engineering and science
• /
• 제6권1호
• /
• pp.47-52
• /
• 2006

The objective of this study is to evaluate the effects of size and permittivity on the specific absorption rate(SAR) values of rat brains during microwave exposure at mobile phone frequency bands. A finite difference time domain (FDTD) technique with perfect matching layer(PML) absorbing boundaries is used for this evaluation process. A color coded digital image of the Sprague Dawley(SD) rat based on magnetic resonance imaging(MRI) is used in FDTD calculation with appropriate permittivity values corresponding to different tissues for 3, 4, 7, and 10 week old rats. This study is comprised of three major parts. First, the rat model structure is scaled uniformly, i.e., the rat size is increased without change in permittivity. The simulated SAR values are compared with other experimental and numerical results. Second, the effect of permittivity on SAR values is examined by simulating the microwave exposure on rat brains with various permittivity values for a fixed rat size. Finally, the SAR distributions in depth, and the brain-averaged SAR and brain 1 voxel peak SAR values are computed during the microwave exposure on a rat model structure when both size and permittivity have varied corresponding to different ages ranging from 3 to 10 weeks. At 900 MHz, the simulation results show that the brain-averaged SAR values decreased by about 54 % for size variation from the 3 week to the 10 week-old rat model, while the SAR values decreased only by about 16 % for permittivity variation. It is found that the brain averaged SAR values decreased by about 63 % when the variations in size and permittivity are taken together. At 1,800 MHz, the brain-averaged SAR value is decreased by 200 % for size variation, 9.7 % for permittivity variation, and 207 % for both size and permittivity variations.

• 한국결정성장학회지
• /
• 제33권6호
• /
• pp.261-267
• /
• 2023

마이크로파 유전체 적용을 위해 (Ca, Sr)(Zr, Ti)O₃ (CSZT) 계에서 MgO 첨가에 따른 결정 구조, 미세 구조, 및 유전 특성을 연구하였다. 고상 반응법을 통해 합성된 CSZT 분말은 orthorhombic 단일상을 형성하였다. CSZT의 시편을 각각 1200℃, 1300℃ 및 1400℃에서 소결하였고, 소결 후 모든 시편은 orthorhombic 단일상을 확인하였다. 또한 모든 소결 시편은 온도가 증가함에 따라 입자 크기가 증가하였다. 1 mol% MgO를 첨가한 시편의 경우도 소결 이후에 orthorhombic 구조를 갖는 것을 확인하였다. EDS 분석을 통해 1400℃에서 소결 중에 이차상이 형성된 것을 확인하였다. MgO 첨가된 CSZT의 입자크기분포와 치밀화는 첨가하지 않은 경우와 거의 유사했으나, 입자크기분포가 좁아지며 균일해지는 것을 확인하였다. MgO 첨가된 CSZT는 1 k Hz에서 ε_r = 34.14, tanδ = 0.00047, τ_ε = -3.58 ppm/℃로 우수한 저손실 유전 특성을 가졌다.

• 한국환경과학회지
• /
• 제13권5호
• /
• pp.449-467
• /
• 2004

Interannual and decadal scale changes in body size of Pacific saury, catch and catch per unit effort were examined to investigate the environmental effects on the stock structure and abundance in the Tsushima Warm Current region. Interannual changes in thermal conditions are responsible for the different occurrence (catch) rates of sized group of the fish. Changes in body size due to environmental variables lead the stock to be homogeneous during the period of high abundance, while one of the reminder cohorts supports the stock during the period of low level of abundance. Migration circuits of two cohorts of saury stock are hypothesized on the basis of short life span and spatio-temporal changes of the stock structure in normal environmental conditions. Changes in upper ocean structure and production cycles by the decadal scale climate changes lead changes in stock structure and recruitment, resulting in the fluctuation of saury abundance. Hypothesized mechanism of the effects of climate changes on stock structure and abundance is illustrated on the basis of changes in thermal regime and production cycle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.419-424
• /
• 2004

we performed the underwater explosion analysis for the liquefied oxygen tank - a kind of fuel tank of a mid-size submarine, and tried to verify the structural safety for this structure. First, we reviewed the theory and application of underwater explosion analysis using Structure-Fluid Interaction technique and its finite element modeling scheme. Next, we modeled the explosive and sea water as fluid elements, the LOX tank as structural elements and the interface between two regions as ALE scheme. The effect on shock pressure and impulse of fluid mesh size and shape are also investigated. As the analysis result, the shock pressure due explosion propagated into the water region and hit the structure region. The plastic deformation and the equivalent stress highly appeared at the web frame and the shock mount of LOX structure, but these values were acceptable for design criteria.

• 한국양식학회:학술대회논문집
• /
• 한국양식학회 2004년도 수산관련학회 공동학술대회 발표요지집
• /
• pp.169-171
• /
• 2004

Interannual and decadal scale body size of Pacific saury, catch and catch per unit effort were examined to investigate the environmental effects on the stock structure and abundance in the Tsushima Warm Current region. Interannual changes in thermal conditions are responsible for the different occurrence (catch) rates of sized group of the fish. Changes in body size due to environmental variables lead the stock to be homogeneous during the period of high abundance, while one of the reminder cohorts supports the stock during the period of low level of abundance. Migration circuits of two cohorts of saury stock are hypothesized on the basis of short life span and spatio-temporal changes in stock structure in normal environmental conditions. Changes in upper ocean structure and production cycles by the decadal scale climate changes lead changes in stock structure and recruitment, resulting in the fluctuation of saury abundance. Hypothesized mechanism of the effects of climate changes on the stock structure and abundance is illustrated on the basis of changes in thermal regime and production cycle.

• 한국해양공학회지
• /
• 제19권1호
• /
• pp.20-25
• /
• 2005

The authors performed the underwater explosion analysis for the liquified oxygen tank - a kind of fuel tank of a mid-size submarine, and tried to verify the structural safety for this structure. First, the authors reviewed the theory and application of underwater explosion analysis, using a Structure-Fluid Interaction technique and its finite element modeling scheme. Next, the authors modeled the explosive and sea water as fluid elements, the LOX tank as structural elements, and the interface between the two regions as the ALE scheme. The effect on shock pressure and impulse of fluid mesh size and shape are also investigated. Upon analysis, it was found that the shock pressure due to explosion propagated into the water region, and hit the structure region. The plastic deformation and the equivalent stress were apparent at the web frame and the shock mount of LOX structure, but these values were acceptable for the design criteria.

• Structural Engineering and Mechanics
• /
• 제84권5호
• /
• pp.665-673
• /
• 2022

Additive manufacturing is an emerging method to manufacture objects with complex shapes and intricate geometry, such as cellular structures. The cellular structures can widely be used in lightweight application as it provides a high strength-to-load ratio. Under the various testing condition, each topology shows different mechanical properties. This study investigates the structural response of various types of cellular structures in compression loading, both experimentally and numerically. For that purpose, honeycomb, modified honeycomb, and spiral-type topology were selected to investigate. Besides, structural properties change by changing the cell size for each topology is also investigated. The specimens were subjected to a compression test by a universal testing machine to determine the absorbed energy and other mechanical properties. An implicit numerical study was also conducted to determine cellular structure's mechanical characteristics. The experimental and numerical results show that the honeycomb structure absorbs the maximum energy compared to the other structures. The experimentally and numerically calculated absorbed energy for the 4.8 mm honeycomb structure was 32.2J and 30.63J, respectively. The results also show that the increase of cell size for a particular cellular structure reduces the energy-absorbing ability of that structure.