• 제목/요약/키워드: Size scaling

검색결과 275건 처리시간 0.024초

Application of Scaling Theories to Estimate Particle Aggregation in a Colloidal Suspension

  • Park, Soongwan;Koo, Sangkyun
    • Korean Chemical Engineering Research
    • /
    • 제60권2호
    • /
    • pp.260-266
    • /
    • 2022
  • Average aggregate size in particulate suspensions is estimated with scaling theories based on fractal concept and elasticity of colloidal gel. The scaling theories are used to determine structure parameters of the aggregates, i.e., fractal dimension and power-law exponent for aggregate size reduction with shear stress using scaling behavior of elastic modulus and shear yield stress as a function of particle concentration. The structure parameters are utilized to predict aggregate size which varies with shear stress through rheological modeling. Experimentally rheological measurement is conducted for aqueous suspension of zinc oxide particles with average diameter of 110 nm. The predicted aggregate size is about 1135 nm at 1 s-1 and 739 nm at 1000 s-1 on the average over the particle concentrations. It has been found that the predicted aggregate size near 0.1 s-1 agrees with that the measured one by a dynamic light scattering analyzer operated un-sheared.

Scaling Factor Design Based Variable Step Size Incremental Resistance Maximum Power Point Tracking for PV Systems

  • Ahmed, Emad M.;Shoyama, Masahito
    • Journal of Power Electronics
    • /
    • 제12권1호
    • /
    • pp.164-171
    • /
    • 2012
  • Variable step size maximum power point trackers (MPPTs) are widely used in photovoltaic (PV) systems to extract the peak array power which depends on solar irradiation and array temperature. One essential factor which judges system dynamics and steady state performances is the scaling factor (N), which is used to update the controlling equation in the tracking algorithm to determine a new duty cycle. This paper proposes a novel stability study of variable step size incremental resistance maximum power point tracking (INR MPPT). The main contribution of this analysis appears when developing the overall small signal model of the PV system. Therefore, by using linear control theory, the boundary value of the scaling factor can be determined. The theoretical analysis and the design principle of the proposed stability analysis have been validated using MATLAB simulations, and experimentally using a fixed point digital signal processor (TMS320F2808).

비간축 웨이브릿 변환과 레티넥스 기법을 이용한 HDR 업스케일링 알고리즘 (A HDR Up-scaling Algorithm Using Undecimated Wavelet Transform and Retinex Method)

  • 한규필
    • 한국멀티미디어학회논문지
    • /
    • 제25권10호
    • /
    • pp.1395-1403
    • /
    • 2022
  • Lately, over 4K high definition and high dynamic range (HDR) display devices are popularized, various interpolation and HDR methods have been researched to expand the size and the dynamic range. Since most of the legacy low resolution (LR) images require both an interpolation and a HDR tone mapping methods, the two processes should be subsequently applied. Therefore, the proposed algorithm presents a HDR up-scaling algorithm using undecimated wavelet transform and Retinex method, which transfers a LR image of low dynamic range (LDR) into the high resolution (HR) with HDR. The proposed algorithm consists of an up-scaling scheme increasing the image size and a tone mapping scheme expanding the dynamic range. The up-scaling scheme uses the undecimated version of the simplest Haar wavelet analysis for the 8-directional interpolation and the change region is extracted during the analysis. This region information is utilized in controlling the surround functions' size of the proposed tone mapping using MSRCR, to enhance the pixels of around the edges that are dominant feature of the subjective image quality. As the results, the proposed algorithm can apply an up-scaling and tone mapping processes in accordance with the type of pixel.

소프트웨어 개발 시 프로젝트의 크기가 구현에 미치는 영향 (Affect of Scaling Up a Project to the Implementation in Software Development Process)

  • 정문재
    • 스마트미디어저널
    • /
    • 제1권4호
    • /
    • pp.79-83
    • /
    • 2012
  • 소프트웨어 개발 시 프로젝트 크기를 늘리는 것(scaling up)은 간단한 프로젝트를 가져다가 각 부분을 좀 더 크게 만드는 단순한 문제가 아니다. 프로젝트의 크기가 증가 할 때 의사소통도 유지되어야 하고, 비용, 생산성, 품질, 개발활동, 개발방법론 등도 고려되어야 한다. 본 논문에서는 소프트웨어 프로젝트의 크기로 인해 개발 될 소프트웨어 프로젝트가 실패하지 않도록 하기 위한 중요 요소들의 효율적인 사용방법들에 대해서 논의한다.

  • PDF

Size Scaling에 따른 Gate-All-Around Silicon Nanowire MOSFET의 특성 연구

  • 이대한;정우진
    • EDISON SW 활용 경진대회 논문집
    • /
    • 제3회(2014년)
    • /
    • pp.434-438
    • /
    • 2014
  • CMOS의 최종형태로써 Gate-All-Around(GAA) Silicon Nanowire(NW)가 각광받고 있다. 이 논문에서 NW FET(Field Effect Transistor)의 채널 길이와 NW의 폭과 같은 size에 따른 특성변화를 실제 실험 data와 NW FET 특성분석 simulation을 이용해서 비교해보았다. MOSFET(Metal Oxide Semiconductor Field Effect Transistor)의 소형화에 따른 쇼트 채널 효과(short channel effect)에 의한 threshold voltage($V_{th}$), Drain Induced Barrier Lowering(DIBL), subthreshold swing(SS) 또한 비교하였다. 이에 더하여, 기존의 상용툴로 NW를 해석한 시뮬레이션 결과와도 비교해봄으로써 NW의 size scaling에 대한 EDISON NW 해석 simulation의 정확도를 파악해보았다.

  • PDF

주파수 영역에서의 움직임 예측을 위한 8×8 크기의 DCT 스케일링 행렬 정의 (Definition of 8×8 sized DCT Scaling Matrix for Motion Estimation in the Frequency Domain)

  • 김혜빈;류철
    • 한국인터넷방송통신학회논문지
    • /
    • 제19권6호
    • /
    • pp.21-27
    • /
    • 2019
  • 동영상 압축 표준은 고해상도의 영상을 위한 처리 기술이 요구되면서 영상의 해상도 증가에 맞춰 부호화 크기를 증가시켰다. 정확한 움직임 예측과 증가된 부호화 크기는 높은 정확도와 압축률을 제공하지만 계산량 증가 문제가 발생한다. 본 논문에서는 복잡도를 줄이기 위해 주파수 영역에서 이동 행렬을 이용한 DCT 기반 움직임 예측을 사용한다. 하지만 일반적인 동영상 부호화기에 사용되는 DCT와 양자화 과정을 주파수 영역의 부호화기에 그대로 적용했을 때 스케일링 과정으로 인한 문제점이 발생함을 발견하였다. 따라서 본 논문에서는 DCT 단계에서 적용할 수 있는 스케일링 행렬을 추출하여 이를 해결하고, 증가된 부호화 크기를 이용해 움직임 예측의 성능을 높였다.

나노 구조 MOSFET의 문턱전압 변화를 최소화하기 위한 스케일링 이론 (Scaling theory to minimize the roll-off of threshold voltage for nano scale MOSFET)

  • 김영동;김재홍;정학기
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2002년도 추계종합학술대회
    • /
    • pp.494-497
    • /
    • 2002
  • 본 논문에서는 halo doping profile을 갖는 나노구조 LDD MOSFET의 문턱전압에 대한 시뮬레이션 결과를 나타내었다. 소자 크기는 generalized scaling을 사용하여 100nm에서 40nm까지 스케일링하였다. Van Dort Quantum Correction Model(QM)을 사용하여 정전계 스케일링과 정전압 스케일링에 대한 문턱 전압과 각각의 게이트 oxide 두께에 대한 direct tunneling 전류를 조사하였다. 게이트 길이가 감소할 때 정전계 스케일링에서는 문턱전압이 감소하고, 정전압 스케일링에서는 문턱전압이 증가하는 것을 알 수 있었고, 게이트 oxide두께가 감소할 때 direct tunneling 전류는 증가함을 알 수 있었다. 감소하는 채널 길이를 갖는 MOSFET 문턱전압에 대한 roll-off 특성을 최소화하기 위해 generalized scaling에서 $\alpha$값은 1에 가깝게 되는 것을 볼 수 있었다.

  • PDF

Development of a generalized scaling law for underwater explosions using a numerical and experimental parametric study

  • Kim, Yongtae;Lee, Seunggyu;Kim, Jongchul;Ryu, Seunghwa
    • Structural Engineering and Mechanics
    • /
    • 제77권3호
    • /
    • pp.305-314
    • /
    • 2021
  • In order to reduce enormous cost of real-scale underwater explosion experiments on ships, the mechanical response of the ships have been analyzed by combining scaled-down experiments and Hopkinson's scaling law. However, the Hopkinson's scaling law is applicable only if all variables vary in an identical ratio; for example, thickness of ship, size of explosive, and distance between the explosive and the ship should vary with same ratio. Unfortunately, it is infeasible to meet such uniform scaling requirement because of environmental conditions and limitations in manufacturing scaled model systems. For the facile application of the scaling analysis, we propose a generalized scaling law that is applicable for non-uniform scaling cases in which different parts of the experiments are scaled in different ratios compared to the real-scale experiments. In order to establish such a generalized scaling law, we conducted a parametric study based on numerical simulations, and validated it with experiments and simulations. This study confirms that the initial peak value of response variables in a real-scale experiment can be predicted even when we perform a scaled experiment composed of different scaling ratios for each experimental variable.

PCVN 시편 파괴인성의 균열 깊이 영향에 대한 Scaling 모델 해석 (Analysis of Cleavage Fracture Toughness of PCVN Specimens Based on a Scaling Model)

  • 박상윤;이호진;이봉상
    • 대한기계학회논문집A
    • /
    • 제33권4호
    • /
    • pp.409-416
    • /
    • 2009
  • Standard procedures for a fracture toughness testing require very severe restrictions for the specimen geometry to eliminate a size effect on the measured properties. Therefore, the used standard fracture toughness data results in the integrity assessment being irrationally conservative. However, a realistic fracture in general structures, such as in nuclear power plants, may develop under the low constraint condition of a large scale yielding with a shallow surface crack. In this paper, cleavage fracture toughness tests have been made on side-grooved PCVN (precracked charpy V-notch) type specimens (10 by 10 by 55 mm) with various crack depths. The constraint effects on the crack depth ratios were evaluated quantitatively by the developed scaling method using the 3-D finite element method. After the fracture toughness correction from scaling model, the statistical size effects were also corrected according to the standard ASTM E 1921 procedure. The results were evaluated through a comparison with the $T_0$ of the standard CT specimen. The corrected $T_0$ for all of the PCVN specimens showed a good agreement to within $5.4^{\circ}C$ regardless of the crack depth, while the averaged PCVN $T_0$ was $13.4^{\circ}C$ higher than the real CT test results.

애핀법에 있어서 문제 축소를 위한 최적비기저의 결정 방법 (A Method Identifying the Optimal Nonbasic Columns for the Problem Size Reduction in Affine Scaling Algorithm)

  • 주종혁;박순달
    • 한국경영과학회지
    • /
    • 제17권3호
    • /
    • pp.59-65
    • /
    • 1992
  • A modified primal-dual affine scaling algorithm for linear programming is presented. This modified algorithm generates an elipsoid containing all optimal dual solutions at each iteration, then checks whether or not a dual hyperplane intersects this ellipsoid. If the dual hyperplane has no intersection with this ellipsoid, its corresponding column must be optimal nonbasic. By condensing these columns, the size of LP problem can be reduced.

  • PDF