In this study, characteristics of silver ink-jet printing were investigated under various substrate treatments such as substrate heating, hydrophobic coating, and ultraviolet(UV)/ozone soaking. Fluorocarbon(FC) film was spin-coated on the polyimide (PI) film substrate to obtain a hydrophobic surface. Although hydrophobicity of the FC film could reduce the diameter of the printed droplets, the singlet images printed on the FC film surface showed irregularities in the pattern size and the position of the printed droplet along with droplet merging phenomenon. The proposed UV/ozone soaking of the FC film improved the uniformity of the pattern size and the droplet position after printing and substrate heating was very effective way in preventing droplet merging. By heating of the substrate after UV/ozone soaking of the coated FC film, silver conductive lines of 78-116 ${\mu}m$ line were successfully printed at low substrate temperatures of $40^{\circ}C$.
아웃소싱의 새로운 형태로 등장한 ASP 서비스는 저렴한 비용, 낮은 위험부담 등의 장점 때문에 소기업이나 신생기업에 유용한 정보화 방안이 될 수 있다. 그러나 ASP는 그 중요성에도 불구하고 이에 대한 학문적 연구는 그렇게 많지 않은 실정이며, 지금까지 아웃소싱에 대한 연구 또한 대기업을 주 대상으로 하고 있다. 본 연구의 목적은 ASP 서비스의 주 사용자 입장에서 국내 소기업과 관련한 주요 환경변수가 ASP 서비스의 활용유형에 미치는 영향을 살펴보고 그 활용유형별로 서비스 만족도와 기업성과간의 관계를 살펴보는데 있다. 실증분석결과, 본 연구에서 주요 환경변수로 고려된 기업규모는 소기업의 정보화 필요성 인식도에 영향을 미치고 정보화 필요성 인식도는 교육시간 및 사용기간에 영향을 미치는 것으로 밝혀졌다. 또한, 기업규모, 정보화 필요성 인식도, 교육시간은 소기업의 ASP 서비스 활용유형에 영향을 미치는 반면에 사용기간은 소기업의 ASP 서비스 활용유형에 영향을 미치지 않는 것으로 밝혀졌다. 마지막으로 본 연구에서는 소기업의 ASP 서비스 활용유형은 기업성과 및 사용자 만족도에 영향을 미치고 ASP 서비스에 대한 사용자 만족도는 기업성과에 영향을 미친다는 점을 검증하였다.
본 연구의 목적은 소규모 유역에서 홍수 저류시설물과 홍수 조절시설물 사이의 임계지속기간을 평가하는데 있다. 4개 소규모 유역을 통하여 수문분석을 실시하였으며, 유효우량은 NRCS 유효우량 산정방법으로 산정하였다. 홍수 저류시설물과 홍수 조절시설물의 임계지속기간은 허용방류량 고정개념을 이용하여 평가하였다. 허용방류량 고정개념을 이용한 경우 최대 저류비를 발생시키는 시간분포는 Huff 2분위 시간분포로 나타났으며, 자연방류형 단일저류지에서 홍수 조절시설물의 임계지속기간은 홍수 저류시설물의 임계지속기간과 유사한 것으로 나타났다.
Nanosphere lithography is an inexpensive, simple, high-throughput nanofabrication process. NSL can be done in different ways, such as drop coating, spin coating or by means of tilted evaporation. Nitride-based light-emitting diodes (LEDs) are applied in different places, such as liquid crystal displays and traffic signals. The characteristics of gallium nitride (GaN)-based LEDs can be enhanced by fabricating nanopatterns on the top surface of the LEDs. In this work, we created differently sized (420, 320 and 140 nm) nanopatterns on the upper surfaces of GaN-based LEDs using a modified nanosphere lithography technique. This technique is quite different from conventional NSL. The characterization of the patterned GaN-based LEDs revealed a dependence on the size of the holes in the pattern created on the LED surface. The depths of the patterns were 80 nm as confirmed by AFM. Both the photoluminescence and electroluminescence intensities of the patterned LEDs were found to increase with an increase in the size of holes in the pattern. The light output power of the 420-nm hole-patterned LED was 1.16 times higher than that of a conventional LED. Moreover, the current-voltage characteristics were improved with the fabrication of differently sized patterns over the LED surface using the proposed nanosphere lithography method.
The rosette-scan seeker is a device mounted on the infrared guided missile. It offers the positions and iamges of target to missiles servo system by scanning a space about target in rosette pattern with a single detector. An instantaneous field of view (IFOV), which is a diameter of a detector moving along the path of the rosette pattern, has the property that its smaller size provide the less interference of background signals and detector noise. If its size is too small to voer the total field of view (TFOV), however, it produces the invisible regions in the TFOV. In this case, the invisible regions cause the performance of the seeker to deteriorate. For full scan-coverage, it is necessary to design the small IFOV without the invisible regions in the TFOV, as possible. In this paper, we propose the new method of designing the smaller IFOV than the conventional method and verify full coverage of the scanned region. By comparing the nose equivalent flux density (NEFD) of the proposed method with the that of the conventional one, we confirm that the former is better than the latter in terms of performance.
한국산 나자식물 5과 12속 19분류군을 대상으로 광학현미경, 주사전자현미경 및 투과전자현미경을 이용하여 화분의 형태를 비교 관찰하고 기재하였으며, 각 과별 검색표를 작성하였다. 분류학적으로 볼 때 취급된 나자식물의 화분립은 모양, 크기, 표면상태, 표면무늬, 기낭의 유무 및 돌기의 유무에 의해 뚜렷이 구분되어 속간 및 속 이하의 분류군에는 유용하였으나, Pinus속내의 종들은 본 연구에서 관찰된 화분립의 크기나 표면무늬에 의해서는 화분형질의 중복으로 인해 종분류는 유용하지 않은 것으로 밝혀졌다. 소나무과내의 Picea속에 속하는 P. koraiensis의 화분립은 기낭의 형태가 불규칙하고, 몸체에 비해 기낭의 크기가 크며, 표벽이 얇기 때문에 기낭을 갖는 Pinus속과 Abies속의 분류군과는 차이점이 뚜렷하다. 또한 Abies속의 특징으로 기재된 모부의 중앙부위에서 기낭쪽으로 갈수록 표벽이 얇아진다는 점, 화분림 몸체의 표면이 비교적 굴곡이 심하지 않다는 점과 화분립의 크기가 크다는 점으로 볼 때 P. koraiensis는 기낭을 갖는 Pinus속과 Abies속 중 Abies속과 화분학적으로 유연관계가 가까운 것으로 추정된다. 투과전자현미경관찰을 통해 기낭을 갖는 화분립을 조사한 결과 근극에는 내표벽과 외표벽이 모두 존재하나, 서로 분리되어 외표벽은 기낭과 연결되고 내표벽은 원극을 이룬다. 또한 구과목의 분류군들에 있어 소나무과를 제외한 주목과, 난우송과 및 측백나무와 일부 분류군의 내표벽이 여러 층으로 구성된 관상구조로 나타났다. 주사전자현미경으로 기낭을 관찰한 결과 표면무늬는 유공상이고 미세한 pit가 존재하는 것으로 관찰되었다. 기낭의 표면무늬는 광학현미경상에서 망상으로 보이나 투과전자현미경으로 관찰해 본 결과 이는 기낭내부의 망상구조가 광학현미경하에서 투시된 것으로 밝혀졌다.
The relaxation of the regulation in selection of medical institution allows patients to use their own judgement in choosing proper institution for their diseases. Since the change of the regulation, there should have been many changes in medical institution selection behavior. The analysis of the change in disease specific selection pattern is critical because there be an optimal selection criteria that ensure the efficient and effective utilization of medical resources. This study analysis the institution selection factors by comparing the choice among the cases of acute diseases, the cases of chronic diseases, inpatient services, outpatient services, and emergency medical service. The comparisons performed in terms of size, class and other characteristics of medical institutions. For the study the nationally surveyed database was used and the data were analyzed using logistic regression procedure. The results indicates that the primary care facilities were not properly utilized. This study speculates that the reason for the undesirable pattern of utilization is that the roles of primary care facilities in the healthcare delivery system was not clearly defined. Based on the results, the medical policy implications are discussed.
Kim, Jong-Sun;Ko, Young-Bae;Hwang, Chul-Jin;Kim, Jong-Deok;Yoon, Kyung-Hwan
Korea-Australia Rheology Journal
/
제19권3호
/
pp.171-176
/
2007
LCD-BLU (Liquid Crystal Display-Back Light Unit) of medium size is usually manufactured by forming numerous dots with $50{\sim}300\;{\mu}m$ in diameter by etching process and V-grove shape with $50\;{\mu}m$ in height by mechanical cutting process. However, the surface of the etched dots is very rough due to the characteristics of the etching process and V-cutting needs rather high cost. Instead of existing optical pattern made by etching and mechanical cutting, 3-dimensional continuous micro-lens of $200\;{\mu}m$ in diameter was applied in the present study. The continuous micro-lens pattern fabricated by modified LIGA with thermal reflow process was tested to this new optical design of LGP. The manufacturing process using LIGA-reflow is made up of three stages as follows: (i) the stage of lithography, (ii) the stage of thermal reflow process and (iii) the stage of electroplating. The continuous micro-lens patterned LGP was fabricated with injection molding and its test results showed the possibility of commercial use in the future.
This experiment has been done to evaluate the relationship between the follicular atresia and the protein patterns on electrophoreais of the follicular fluids in porcine ovary. The protein concentration of the follicular fluids was lower than that of serum, and gradually decreased as the follicle siae became larger. The number of protein bands of follicular fluid on electrophoresis was less than that of serum, and gradually increased as follicle size became larger. Three specific bands were detected on disc PAGE and one band(M W. 75,000) on SDS PAGE in the follicular fluids, while not in serum. One band (A) at ${\beta}$-globulin region on disc PAGE became heavier, as follicles became atretic. Two bands less than(M. W. 20,000) were detected only in the large follicular fluid. Another band(M. W. 43,000) was not detected in necrotic group, whereas all other groups showed it. It could be concluded that the component and composition of the proteins follicular fluids changes according to the follicular size during atresia. Therefore detection of the changing pattern of proteins in the follicular fluid can be used as a basic criterion for the identification of follicular atretic stage.
In order to investigate the factors affecting the culture of mouse preantral follicles in vitro, we examined the effect of culture media, protein supplements, and culture period on their growth. The oocyte diameter (initial size: $55.6{\pm}2.5{\mu}m$) was progressively increased during culture, and the maximum size ($72.0{\pm}2.4{\mu}m$) was reached on day 10 of the in vitro culture. The chromatin configuration in the germinal vesicle (GV) oocyte progressively shifted from a non-surrounded nucleolus (NSN) to a surrounded nucleolus (SN). On day 10 of the culture, most of the oocytes progressed to the SN pattern. The survival and metaphase II rates of the oocytes in alpha-minimal essential medium (alpha-MEM) were significantly higher (p<0.05) than those in Waymouth and tissue culture medium (TCM)-199. As a protein source, fetal bovine serum (FBS) was more suitable for the culture of mouse preantral follicles as compared to human follicular fluid (hFF) and bovine serum albumin (BSA); the optimal concentration of FBS was 5%. These results suggest that in a culture of mouse preantral follicles, alpha-MEM and 5% FBS are an optimal medium and a protein source, respectively; further, the 10 days of culture is required for the complete growth of oocytes in this culture system.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.