• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.2
• /
• pp.130-138
• /
• 2006

We have investigated pattern scaling down of silicon stamps through the oxidation technique, During oxidizing the silicon stamps, silicon dioxide that has 300 nm and 500 nm thickness was grown, and critical deformations were not observed in the patterns. There was positive effect to reduce size of patterns because vertical and horizontal patterns have different orientation. We achieved pattern reduction rate of $26\%$. In addition, the formation of polymer patterns had been investigated with varied temperature and pressure conditions to improve the filling characteristics of polymers during nanoimprint lithography when pattern sizes were few micrometers. In these varied conditions, polymers had been affected by free space compensation and elastic stress relaxation for filling the cavities. Based on the results, defect control which is an important issue in the nanoimprint lithography were facilitated.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.465-468
• /
• 1998

For porous silicon layer to be used as active layer in various devices, it is necessary to be formed locally along with a designed pattern on the wafer. However, there is still no suitable masking layer to withstand against the high concentration of HF for a time of some minutes up to some hours during the anodic process effectively. In this work, we investigated the property of selectivity between p$^{+}$ and n layers to form localized porous silicon even without a mask by the difference of the anodic I-V characteristics on the doping level and doping type. The width of the pattern made in the sample was 2mm, and the formed porous silicon layer was observed by SEM to see the morphology on the cross section below the surface. As the results, it was found that the selectivity was reasonable for the pattern size over 100.mu.m.m.

• The Research Journal of the Costume Culture
• /
• v.15 no.2 s.67
• /
• pp.299-310
• /
• 2007

The purpose of this study was to develop wool knitted Jacket pattern suited for Middle-aged women's body shape. The usable data of first and second wearing test were coded for further statistical analysis including descriptive statistics(frequency and one way- ANOVA test, Student-Newman-Keuls Multiple Range Test) by using SPSSWIN 12.0. The results were as follows: 1. It was found that first evaluation for the appearance test on fitness, pattern B were better than the rest of them. 2. It was found that second evaluation for the test, jacket B with milano were better than the rest of them. Therefore, it should be designed as possible as considering the physical characteristics of knitted materials. 3. It was found that third evaluation for the test, it is necessary that knitted jacket follow a similar size tolerance such as a woven jacket.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.2
• /
• pp.142-150
• /
• 2016

This paper developed new manufacture process technology of slim type flexible flat lighting product used lower power white LED. Flexible flat lighting is applied to letter sign lighting, traffic lighting, interior wall lighting, flat lighting, aquarium back lighting, wreath light etc. Main manufacture process technology were developed drawing software for electronics circuit, inkjet electronic circuit pattern and inkjet white ink coating. For pattern printing it was utilized for piezoelectonic inkjet head printing technology. Also high vacuum pressure laminating technology was waterproofing for LED flat lighting protection. Hence, form process technology we were manufactured for flexible flat lighting product of the power 12 W, input voltage 48 V and plane size $480{\times}480mm$. It acquired a these validity from experiment results.

• The Research Journal of the Costume Culture
• /
• v.14 no.5
• /
• pp.699-714
• /
• 2006

The purpose of this study is to suggest a methodology to grasp the design method of industrial slacks pattern for women in their early twenties. The result of this study is as follows: 1. The result of the questionnaire showed that the design of rear center gradient was most important and the rear center gradient was designed by shifting waist line and hip line to a suitable degree.; below the waist by 4cm, the girth was measured and the ease of $0{\sim}1cm$ was applied to it, and the ease of hip girth was $3.2{\pm}1.2cm$, and rear center gradient was $2.2{\pm}1cm$, and front crotch extension was $2.8{\pm}0.5cm$, while rear crotch extension was $6.3{\pm}0.5cm$. 2. By comparing rear center gradient which was selected as an important design item with total crotch length and hip girth, I selected industrial pattern and educational pattern, and evaluated them on human bodies. In the result of ANOVA analysis, there were meaningful differences in 8 items: the ease of front waist girth, the ease of front abdomen, the ease of front hip girth, rumples in the side lines, the location of rear waist line, etc. 3. The design method of slacks pattern suitable for women in their early twenties was suggested as follows: the location of waist girth is below waist by $2.5{\sim}3cm$; the ease of waist girth is $0{\sim}1cm$; the ease of hip girth is $2{\sim}3cm$; total crotch length is body size - 5cm; rear center gradient is $2.5{\pm}0.5cm$; rear crotch extension is $7{\pm}0.5cm$; front crotch extension is 3cm.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.396-401
• /
• 2017

In this paper, a device to analyze gait pattern was developed by using a 2-axis acceleration sensor attached to the foot. The 1st low-pass filter was adapted to limit the frequency band up to 5 Hz. An algorithm to detect the peak value exceeding the threshold voltage of an X-axis acceleration sensor and a Z-axis acceleration sensor was developed and normal and abnormal walking patterns were thus differentiated. Also, MCU and Bluetooth were combined to transfer the data to other MCUs to display on an LCD; the size of the device could then be reduced. The new algorithm and the device allowed the individual walking patterns to be easily measured at a low cost and with less restriction on activities compared to conventional multiple pressure sensors or motion camera system.

• Journal of the Korean Home Economics Association
• /
• v.49 no.3
• /
• pp.113-121
• /
• 2011

This study developed a method of calculating dynamic wearing ease (DWE) to make patterns for coverall work clothing. The DWE was measured from 3D body scan data of women in their 20's (n = 10). The body postures adopted for measuring the DWE were sitting and deep bending postures. Three types of experimental patterns (A, B, C) were developed. The DWE was applied at the waist and hip lines of the pattern. The location and size of the DWE varied from one pattern to another. For pattern B, DWE of 8.8cm was applied at the back of the waistline. For pattern C, 5.3cm was applied at the waist for the center back line, and 3.5cm was applied at the under hip level. The comfort of the experimental clothing was evaluated in six body postures. The results showed that patterns B and C were comfortable at the crotch, shoulders, and arm pits. Pattern C was comfortable at the hip and crotch areas in the arms lifting-up posture and the stepping-up posture. The appearance and fit of the experimental clothing were evaluated by the panels. Patterns B and C fitted better than pattern A at the abdomen. The results suggest that DWE should be applied at the waist and hip levels for making coverall work clothing patterns.

• The Research Journal of the Costume Culture
• /
• v.26 no.3
• /
• pp.360-376
• /
• 2018

The purpose of this study was to make a pants pattern suitable for women 70 to 85 years of age, then analyze that- pattern's shape, size, appearance, fit, allowance and air gap. Participants made the pattern using 3D simulation program DC Suite version 5.1. The results suggest a design method suitable for the lower-body shapes of elderly women. In external appearance, the A-type earned the highest evaluation in all items except the allowance of the back waist and back hip. The L type earned the highest evaluation in the allowance of back waist and hips. The A-type's, back waist appeared set at an angle that did not match the body shape of an old-old aged woman in the center-back-line setting. Therefore, the pattern method of A-type combined with L-type's method of center back, produces an excellent pants pattern. Evaluation of the air gaps among patterns revealed that; the A-type showed the largest air gap in waist and hip circumference and the smallest air gap in thigh circumference. The waists, abdomen, and hip circumferences of older women often become larger while their legs become slimmer. This study accounted for those factors in determining a pattern suitable for the lower-body shape of old-old aged women. However, participants only analyzed four patterns and compared them with women 70 to 85, years of age. Therefore, it is necessary to develop industrial patterns applicable to a wide age group.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.2
• /
• pp.294-306
• /
• 2008

The purpose of this study is a men's dress shirt pattern by somatotype for mass customization system that is rising to the surface as a new production system. Subjects were 65 men aged from 25 to 44 for making research pattern and 9 men for wearing test. The dress shirt went through the secondary wearing test and sensory evaluation to verify the propriety of the research pattern. The results were as follows: For making research dress shirts pattern used the body parts size that were height, the circumference of the neck, the chest circumference, the length between biacromion, the arms length, and the waist circumference. The waist back length, the waist to hip length and the pattern length of were set by the calculation formula based on the height. The ease of 16cm for the chest circumference and A type had the ease of 10cm for the waist circumference, Y type had the ease of 8cm and B type had 12cm. Through the wearing test, the research pattern showed significant difference from the comparative patterns so additional two items of the length between biacromion and waist circumference were added to the items used in the comparative patterns through which satisfactory results were obtained. In the secondary wearing test for the dress shirt, all the items, except for the front centerline, were evaluated excellent. As a result of evaluating by the figure type, the normal type was evaluated best in all the items.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.833-834
• /
• 2014

In recent years, a pattern recognition method has been widely used by researchers for fault diagnoses of mechanical systems. A pattern recognition method determines the soundness of a mechanical system by detecting variations in the system's vibration characteristics. Hidden Markov model has recently been used as pattern recognition methods in various fields. In this study, a HMM method for the fault diagnosis of a mechanical system is introduced, and a rotating machine with mass unbalance is selected for fault diagnosis. Moreover, a diagnosis procedure to identity the size of a defect is proposed in this study.