• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.983-987
• /
• 2008

Computational simulation has been performed to design optimally the filtration system for IGCC pilot plant. It was analyzed how the different inflow pattern influences the flow field and the particle behavior in a filter vessel. The particle loading onto the filter surface lowers significantly and decreases dramatically with particle size when the dusty gas flows into the filter vessel with a shroud tube through a tangential inlet setup tangentially on the vessel outer wall. However, the particle loading is considerably high when the dusty gas enters the filter vessel through a normal inlet setup vertically on the vessel top wall, and the decrease of the particle loading with particle size is not steeper compared with the tangential inflow pattern.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.7
• /
• pp.1303-1313
• /
• 2001

This study was performed to develop a mobile functional pattern reflecting the characteristics of the middle aged women's lower body types based on the slacks construction components. The results and procedures obtained from this study were as follows; 1. The bodys measurement of the 252 middle aged women of 45∼59 years old were used to analyze the size and somato type. 2. For multiple analysis of the lower body types, horizontal and vertical section maps were obtained by sliding gauge method and extracted constructional factors of slacks. 3. The following condition was determined with both standing and moving position of body: (gradient of C.B.L/2)+3°and (back crotch extention)+2cm. 4. Development of new slacks pattern drafting was based on the result of data analysis. Trough the wearing test by the sensory evaluation, It showed that developed slacks pattern was judged better than existing patterns in items of comfort of comfort of silhouette and moving.

• International Journal of Computer Science & Network Security
• /
• v.21 no.8
• /
• pp.196-202
• /
• 2021

DNA sequencing provides fundamental data in genomics, bioinformatics, biology and many other research areas. With the emergent evolution in DNA sequencing technology, a massive amount of genomic data is produced every day, mainly DNA sequences, craving for more storage and bandwidth. Unfortunately, managing, analyzing and specifically storing these large amounts of data become a major scientific challenge for bioinformatics. Those large volumes of data also require a fast transmission, effective storage, superior functionality and provision of quick access to any record. Data storage costs have a considerable proportion of total cost in the formation and analysis of DNA sequences. In particular, there is a need of highly control of disk storage capacity of DNA sequences but the standard compression techniques unsuccessful to compress these sequences. Several specialized techniques were introduced for this purpose. Therefore, to overcome all these above challenges, lossless compression techniques have become necessary. In this paper, it is described a new DNA compression mechanism of pattern matching extended Compression algorithm that read the input sequence as segments and find the matching pattern and store it in a permanent or temporary table based on number of bases. The remaining unmatched sequence is been converted into the binary form and then it is been grouped into binary bits i.e. of seven bits and gain these bits are been converted into an ASCII form. Finally, the proposed algorithm dynamically calculates the compression ratio. Thus the results show that pattern matching extended Compression algorithm outperforms cutting-edge compressors and proves its efficiency in terms of compression ratio regardless of the file size of the data.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.992-1000
• /
• 2012

This study develops a traditional green fabric pattern design through an apparel CAD system. The method used simulated stage costumes and evaluated the consumer satisfaction connected with a 3D fitting system. The results are as follows. Computerization of the pattern making process can provide higher accuracy and efficiency in apparel pattern making and marking for green fabrics. A Stage costumes design was developed; subsequently, the developed dress patterns are automatically depicted to the input of the body size of the consumer and marked using marking program. This results show that it has an effect on narrow and expensive green fabrics. Stage costumes design can make a simulation by a 3D Fitting system. The results of this study can provide higher consumer satisfaction through a survey of 30 consumers. Stage costumes should attract the sympathy of the spectators. The Acceptance of Andong region's traditional beauty is required. We found that a relationship of performance and clothes, physical functionality and beauty of costumes, possibility of commercialization, and the possible use of a 3D Fitting system use are evaluated. A continuous study of regional culture resources is required since there is a significant possibility for the long-term development of stage clothes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.2
• /
• pp.273-286
• /
• 2016

Protective coveralls are very uncomfortable to work in comparison to ordinary top and bottom separated clothing. A pattern maker has to consider the size of the human body and human motion range when designing protective coverall patterns. It is difficult to produce well-fitted coveralls because of the lack of readymade patterns despite the increased need for protective coveralls at various jobs. Patterns are decomposed by unsewing 18 products in the domestic market to provide the fundamental information on developing patterns for protective coveralls. The characteristics and differences of pattern types are compared after grouping patterns with information taken from the analysis of the shapes and measurements of patterns from the acquired patterns. The results of the analysis showed that on-market protective coveralls were less curved but much linear when compared to ordinary clothing patterns; however, the breasts and crotch circumferences were very loose and bulky, which is quite different from the other all-in one style working clothes. For the pattern shapes, patterns are classified into waistline-seamed and bustline-seamed types. The result of the hierarchical cluster analysis with 27 measurement variables were classified into four groups. Types by shape and measurements were related to each other; therefore, we expect the information of each type to be used in developing protective clothing patterns.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.454-457
• /
• 2005

Mining frequent patterns in transaction databases, time-series databases, and many other kinds of databases has been studied popularly in data mining research. Most of the previous studies adopt an Apriori-like candidate set generation-and-test approach. However, candidate set generation is still costly, especially when there exist prolific patterns and/or long patterns. And calendar based on temporal association rules proposes the discovery of association rules along with their temporal patterns in terms of calendar schemas, but this approach is also adopt an Apriori-like candidate set generation. In this paper, we propose an efficient temporal frequent pattern mining using TFP-tree (Temporal Frequent Pattern tree). This approach has three advantages: (1) this method separates many partitions by according to maximum size domain and only scans the transaction once for reducing the I/O cost. (2) This method maintains all of transactions using FP-trees. (3) We only have the FP-trees of I-star pattern and other star pattern nodes only link them step by step for efficient mining and the saving memory. Our performance study shows that the TFP-tree is efficient and scalable for mining, and is about an order of magnitude faster than the Apriori algorithm and also faster than calendar based on temporal frequent pattern mining methods.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.391-406
• /
• 2014

The performance of General-Purpose computation on Graphics Processing Units (GPGPU) is heavily dependent on the memory access behavior. This sensitivity is due to a combination of the underlying Massively Parallel Processing (MPP) execution model present on GPUs and the lack of architectural support to handle irregular memory access patterns. Application performance can be significantly improved by applying memory-access-pattern-aware optimizations that can exploit knowledge of the characteristics of each access pattern. In this paper, we present an algorithmic methodology to semi-automatically find the best mapping of memory accesses present in serial loop nest to underlying data-parallel architectures based on a comprehensive static memory access pattern analysis. To that end we present a simple, yet powerful, mathematical model that captures all memory access pattern information present in serial data-parallel loop nests. We then show how this model is used in practice to select the most appropriate memory space for data and to search for an appropriate thread mapping and work group size from a large design space. To evaluate the effectiveness of our methodology, we report on execution speedup using selected benchmark kernels that cover a wide range of memory access patterns commonly found in GPGPU workloads. Our experimental results are reported using the industry standard heterogeneous programming language, OpenCL, targeting the NVIDIA GT200 architecture.

• The Journal of Korea Robotics Society
• /
• v.14 no.3
• /
• pp.228-235
• /
• 2019

This paper presents a multiple DoFs (degrees-of-freedom) prosthetic forearm and sEMG (surface electromyogram) pattern recognition and motion intent classification of forearm amputee. The developed prosthetic forearm has 9 DoFs hand and single-DoF wrist, and the socket is designed considering wearability. In addition, the pattern recognition based on sEMG is proposed for prosthetic control. Several experiments were conducted to substantiate the performance of the prosthetic forearm. First, the developed prosthetic forearm could perform various motions required for activity of daily living of forearm amputee. It was able to control according to shape and size of the object. Additionally, the amputee was able to perform 'tying up shoe' using the prosthetic forearm. Secondly, pattern recognition and classification experiments using the sEMG signals were performed to find out whether it could classify the motions according to the user's intents. For this purpose, sEMG signals were applied to the multilayer perceptron (MLP) for training and testing. As a result, overall classification accuracy arrived at 99.6% for all participants, and all the postures showed more than 97% accuracy.

• Journal of the Korean Home Economics Association
• /
• v.47 no.4
• /
• pp.61-72
• /
• 2009

The purpose of this research is to suggest a new way to approach measuring the waist line of slacks. The pattern formulated enables a construction method that optimizes motion. The method is based on the measurement on the length change of the body surface line. The research reveals: 1. The analysis of expansion and contraction by area showed that G8 markedly shrunk, whilst G15 maximally stretched during M4 motion. 2. The areas that stretched during M2 motion were, in order of size: G10, G17, G16, and G8. Conversely, the areas that shrunk are, in order, G9, G11, and G18. The areas that stretched during M3 motion were G10, G17, G16, G12, and G15; the areas that shrunk were G9, G11, G18, and G8. 3. In constructing the slacks pattern to allow for appropriate movement, we calculated the length between the knee and back of the waist, point (y), using Pythagoras’theorem and trigonometry. The equation was y = 1.005x. 4. In the two pattern N method and L method, y is equal or less than x, but for our research pattern, y was larger than x

• Journal of the Korean Society of Costume
• /
• v.54 no.7
• /
• pp.27-40
• /
• 2004

The purpose of this paper is to make it easy to reproduce the Pattern and sewing technique of men's coat in 18th century. which are modified in order to be made readily available in Korean theatre costume. The investigation was performed in three steps. 1st, The papers and records about development and change of men's coats were reviewed. End; The whole process of the way how to make a typical 18th century men's coats were sewn. 3rd ; The modification or revision into the more simplified pattern using by CAD system and sewing technique were suggested in detail. The size of the pattern in the original one, which we chose for this research, was generally small. with the side line being moved back a little. Moreover, arm movements were severely restricted because of the small arm-hole. The problems of original pattern were corrected by making both front and back pattern snug and side line being moved to the front, and making arm-hole wider. In the sewing technique, the simple way how to use of Padding, inter-linings and linings and to create the most noticeable figure of 18th century men's coat. This article may help theatre costume production in Korean performing art.