• Bulletin of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.872-879
• /
• 2002

One of the improtant characteristics of core-shell type nanoparticles is the long-term storage and reuse as an aqueous injection solution when required. For this reason, reconstruction of lyophilized core-shell type nanoparticles is considered to be essential . BAB type triblock copolymers differ from AB type diblock copolymers, which contain the A block as a hydrophilic part and the B block as a hydrophobic part. by not being easily redistributed into phosphate-buffered saline (PBS, pH 7.4, 0.1 M). Therefore, lyophilized core-shell type nanoparticles of CEC triblock copolymer were reconstituted using a somication process with a bar-type sonicator in combination with a freezing-thawing process. Soncation for 30s only resuspended CEC nanoparticles in PBS; their particle size distribution showed a monomodal pattern with narrow size distribution. The bimodal size distribution pattern and the aggregates were reduced by further sonication for 120 s but these nanoparticles showed a wide size distribution. The initial burst of drug release was increased by reconstitution process. The reconstitution of CEC core-shell type nanoparticles by freezing-thawing resulted in trimodal distribution pattern and formed aggregates, although freezing-thawing process was easier than sonication . Drug release form CEC nanoparticles prepared by freezing-thawing was slower than from the original dialysis solution. Although core-shell typenanoparticles of CEC triblock copolymers were not easily performed. Cytotoxicity testing of core-shell type nanoparticles of CEC-2 triblock copolymers containing clonazepam (CNZ) was performed using L929 cells. Cytotoxicity of CNZ was decreased by incorporation into nanoparticles.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.3
• /
• pp.27-37
• /
• 2005

This study is aimed at the ready-mades size system and satisfaction of consumers size for woman's wear at domestic market which are made by public production systems. This study, particularly, is focused on jacket of 20-30 aged woman's wear in twenties & thirties female clothe. The procedures of this study are as follows; 1. Select 25 domestic clothing companies that its product has targeted in twenties & thirties female and investigate the system of each pattern size 2. Select 259 female in twenties & thirties randomly in Seoul survey a standad of females jacket purchase. Analysis of this study is based on SPSS statistics program, technical statistics, $X^2$ and ANOVA verification. The results of studying are as follows; 1. The survey of pattern size of the domestic females clothing companies has shown some distinctive feature at age and body type of their consumers. 2. Crucial point of female consumers in twenties & thirties is a design and fitness of their jacket while they are purchasing their jacket. 3. Female consumers have some dissatisfaction for the variety of size, difficulty of purchasing and size of bust, shoulder & length of arms of their jacket.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.9
• /
• pp.65-71
• /
• 2017

This paper proposes a smart phone authentication method based on user's behavior and habit that is an authentication method against shoulder surfing attack and brute force attack. As smart phones evolve not only storage of personal data but also a key means of financial services, the importance of personal information security in smart phones is growing. When user authentication of smart phone, pattern authentication method is simple to use and memorize, but it is prone to leak and vulnerable to attack. Using the features of the smart phone pattern method of the user, the pressure applied when touching the touch pad with the finger, the size of the area touching the finger, and the time of completing the pattern are used as feature vectors and applied to user authentication security. First, a smart phone user models and stores three parameter values as prototypes for each section of the pattern. Then, when a new authentication request is made, the feature vector of the input pattern is obtained and compared with the stored model to decide whether to approve the access to the smart phone. The experimental results confirm that the proposed technique shows a robust authentication security using subjective data of smart phone user based on habits and behaviors.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.4
• /
• pp.12-23
• /
• 2001

The research focused on the landscape of mountains and hills drawn in a landscape picture. The purpose of the research is to classify patterns of landscape drawning in landscape pictures and to clarify the characteristics of the pattern by a quantitative index. We selected 21 landscape pictures to understand the Landscape Setting Here(LSH) and Landscape Setting These(LST). We investigated size quantitative indices using 1 landscape picture. The index is a follow: altitude, Visual Distance, Angles, Angle of Appearance Size, Inclination, and Angle of Incidence. The following results were obtained by using this data. 1) It has been understood that we offer an important city view because the LSH of this research can establish understanding of the city structure. 2) We dividing 3 patterns by the LST space drawn in the landscape picture. 3 patterns are Ferry point, Beauty point, an Signal-fire point. 3) We clarified the landscape characteristics of each pattern and the characteristics between patterns by using the index according to this pattern. 4) We understood the problem concerning the Seoul city landscape examining the pattern of this research with the ordinance of Seoul city. It is necessary to standardized a system of pattern classification utilized in landscape pictures to establish a universally interpreted detailed quantitative index, which can be applied to research.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.1
• /
• pp.84-90
• /
• 2013

The hydrogen or oxygen gas producted by electrolysis become many bubbles in the electrolyte, but exact data on the behavior of these bubbles in the separator of an electrolysis stack didn't become known. In this study, the flow visualization experiment on the behavior of bubbles in the flow pattern of the array type separator is performed by using of a visible alkaline electrolysis stack and a stereoscopic microscope. As the results, a fine size bubbles adhered to the surface of the flow pattern grow to large sized bubbles until each bubble's buoyance is lager than the sum of external force and weight. And then the large bubbles flow into the upper area of the separator. Bubbles adhered to the surface of the vertical flow pattern grow quickly than them adhered to the surface of the horizontal flow pattern. Also, he electrolysis efficiency is declined because many multi-size bubbles occupied the wide volume in the flow pattern.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.164-172
• /
• 2019

Current clinical methods for diagnosing urination disorder are invasive, expensive, and very inconvenient to perform continuous monitoring. EIT is a non-invasive technique that injects electrical current through an external electrodes and measures the induced voltage to visualize the internal electrical (impedance) characteristics, which makes it possible to monitor bladder conditions with low cost. The signal characteristics of the measured voltage data changes according to the current pattern injected through the electrode and affects reconstruction performance. In this paper, image reconstruction performance is compared and analyzed according to the injected current patterns to maximize the sensitivity to the variation of bladder size.

• Fashion & Textile Research Journal
• /
• v.14 no.5
• /
• pp.846-852
• /
• 2012

Pets (such as dogs) are considered as important as family members, this perspective is due to an aging population and the decreased size of the traditional nuclear family. The pet industry has been growing every year; subsequently, is useful to develop practical patterns and designs appropriate for the body structure and movement of pet dogs. However, studies to develop a new form of pet dog's wear patterns and designs are limited. This study develops a basic pattern that is easily used based on a pet dog's size, designs popular clothing items for pet dogs, and helps in the manufactures of pet dog's wear. The results are as follow: 1) Analyzed categories and popular items of pet dog's wear from the research of the prior studies and on-line pet dog shopping malls; three categories (everyday wear, street wear, and special wear) and six items (T-shirt, one-piece, coat, jumper, and dress, tuxedo). 2) Developed the basic bodice pattern and sleeve pattern after test-wearing and revising the experimental patterns referenced from prior studies. 3) Developed patterns and designs for six popular items based on situation and gender: one-piece (everyday wear), coat (street wear), wedding dress (special wear) for female dogs/T-shirt (everyday wear), hood jumper (street wear), tuxedo (special wear) for male dogs. 4) Developed the previous six items to illustrate the research results of the study.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1532-1536
• /
• 2007

A plastic substrate with tiny rectangular pillars less than 100nm is injection molded to study pattern replication in injection molding. The size of the substrate is 50mm ${\times}$ 50mm and 1mm thick. The substrate has 9 patterned areas of which size is 2mm ${\times}$ 2mm respectively. The lengths of the pillars are 50nm, 100nm, 150nm and 200nm and the width and height are 50nm and about 100nm respectively. A pattern master is fabricated by e-beam writing using positive PR(photo resist) and then a nickel stamper replicated from the PR master by nickel electro-plating. Cr is deposited on the PR pattern master before nickel electro-plating as a conducting layer. Using this nickel stamper, several injection molding experiments are done to investigate effects of the injection molding parameters such as mold temperature, injection rate, packing pressure or pattern location on the replication of the patterns under 100nm.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.37.1-37.1
• /
• 2009

최근 휘어짐이 가능한 flexible display의 개발이 활발히 진행됨에 따라 OLED(organic light emitting diode)의 발전 가능성은 커지고 있다. 하지만 cathode 재료인 Cr, Al등은 tensile 또는 bending에 취약하다. 따라서 본 연구에서는, 인장시험용 아령모형의 PET($125\;{\mu}m$) 필름에 Al, Cr, Cr+Al을 각각 코팅하고 부분적으로 hole을 patterning함으로써 인장 시 미소크랙의 발생을 감소시켜 전기저항(R) 변화를 최소화하는 패턴형상을 design하고 세 가지 금속의 전기저항 변화를 통해 좀 더 우수한 flexible display용 금속을 찾는데 그 목적이 있다. 전극에 형성된 미세패턴의 영향과 패턴 된 hole size에 따른 전기저항의 변화를 알아보기 위해 hole size는 $50\;{\mu}m$, $30\;{\mu}m$, $10\;{\mu}m$로 제작하였고 각각의 금속막에 patterning하였다. 제작된 시편을 인장시험 장치에 설치 후 2mm/min의 속도로 인장응력을 가하면서 Load의 증가에 따른 금속막의 전기저항($\bigtriangleup$R)을 동시동작으로 측정하였다. 실험결과 인장시험 시 저항변화는 Cr이 짧은 시간에 가장 급격하게 변하였으며 다음으로 Cr+Al, Al순 이였다. 또한, hole size의 크기에 따른 전기저항의 변화는 $50\;{\mu}m$ size의 hole을 pattern한 시편이 가장 안정한 저항 변화를 보였다.

• Journal of the Korean Home Economics Association
• /
• v.45 no.3
• /
• pp.23-31
• /
• 2007

This study was conducted to reproduce the four-piece bodice pattern of a ladies' costume of the 1890's for Korean women in their twenties with a standard body type and average size. Eighteen four-piece bodice patterns of the ladies' costume of the 1890's were collected and drawn to actual size. The front width of the bodice was wider than the back width. The front bust line of the bodice was wider than the sum of the back bust line, the side back bust line and the under-arm gore bust line. The front waist line of the bodice was wider than the sum of the back waist line, the side back waist line and the under-arm gore waist line. The angles of the two waist darts of the bodice were very big but the legs of the dart were too short. The center front line of the bodice was oblique and curved. The angle of the back shoulder line of the bodice was bigger than the angle of front shoulder line. The shoulder seam line of the bodice was not placed on the top of the shoulder but behind the shoulder. The pattern characteristics of the bodice created a woman's silhouette that emphasized the volume of the bust, a chicken breast and a slim waist. The study pattern which had the characteristics of the four-piece bodice of the 1890's was designed like for Korean women in their twenties who have a standard body type and an average size through modifications based on the evaluation of two dressing occasions. The study pattern was evaluated to have the silhouette of the 1890's and to fit Korean women.