• The Research Journal of the Costume Culture
• /
• v.9 no.2
• /
• pp.319-332
• /
• 2001

This study attempts to measure body sizes and somatotypes of 844 female middle and high students girls in their growth period and to investigate characteristics of each of the measured somatotypes. The data used for this study were 50 items of body sizes obtained from anthropometric measurements. The purposes of the study are as follows: 1. to analyze physical characteristics according to age. 2. to extract factors of somatotypes using factor analyses. 3. to classify somatotypes according to physical characteristics using cluster analyses. The study results were as follows: 1. TH anthropometric measurements indicated that three existed collective patterns of somatotypes across Group I(12∼13 years old), Group II(14∼15 years old), and Group III(16∼18 years old). 2. Through factor analyses, 6 factors were yielded from each age group. The cumulative proportions of these factors were 77% for Group I, 75% for Group II, and 72% for Group III. Factor I indicates a horizontal size factor and Factor 2 indicates a vertical size factor. 3. Group I and Group II ere classified into 5 types and Group III was classified as 3 types. In Group I, middle height and a little slim types were most prevalent(28%). In Group II, low height and very slim types were most prevalent(28.9%). Finally, In Group III, low height and slim types were most prevalent(4.6%)

• Journal of the Korean Society of Costume
• /
• v.53 no.3
• /
• pp.63-72
• /
• 2003

The purposes of this study were to classify the upper half of body somatotype and analyze the characteristics of each somatotype. The subjects of survey were 272 elementary school boys of 11 to 12 years old living in Pusan and Kyungsangnam-do. Datas were collected through 36 anthropometric measurements and 7 photographic measurements. They were analyzed by factor analysis, cluster analysis and analysis of variance. The results of the study were as follows : 1. According to the factor analysis. seven factors were extracted from measurements of the upper half of body and those factors comprised 79.62% of total variance. Specially factor 1 was characterized sectional size and factor 2 was characterized longitudinal size comprised 58.83% of total variance. 2. According to the cluster analysis, the upper half of body somatotype was classified four types : Boys in type 1 had quite high stature and big frame, broadest and most sloping shoulders, flattest chest and belly, quite protruded shoulder blades boys in type 2 had quite short stature and small frame, quite broad and most rising shoulder, most protruded belly, quite protruded shoulder blades boys in type 3 had shortest stature, smallest frame, narrowest and quite rising shoulders, most protruded chest, flattest shoulder blade and quite flat belly : boys in type 4 had highest stature, biggest frame, most protruded shoulder blades and quite protruded chest and belly.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.563-573
• /
• 1999

The purpose of this study was to evaluate the availability of computer system for the measurement of tooth size in the model analysis through the comparison of two measurements: One was to use a computer; and the other was to use vernier calipers. Twenty sets of casts were used, which showed a moderate degree of crowding and full eruption of all teeth. The mesio-distal width of 12 teeth from the left central incisor to the left first molar at each set of the casts were measured twice with vernier calipers and a computer respectively. This measurement was repeated two weeks later. First, for the reproducibility analysis, the two computer measurements were compared then the vernier calipers measurements were compared. Second, all the teeth were sepapated into the region of mesiodistal contact points and its width was measured by a micrometer to obtain standard measurements. For the accuracy analysis, these standard measurements were compared with the measurements from the dental casts using two methods. The difference between them was defined as the measurement error. To investigate the cause of measurement error, an examination was made for the presence and degree of contact point deviation on each tooth from the upper and lower occlusograms, and the mesio-distal angulation of each tooth was measured with TARG. Following results were obtained through statistical analysis. 1. In the analysis for reproducibility; the measurements with vernier calipers showed significant differences in three out of twelve teeth while the computer measurements showed significant differences in one out of twelve teeth. 2. In the analysis for accuracy; compared with the standard measurements, the measurements with vernier calipers showed significant differences in three out of twelve teeth while the computer measurements showed significant differences in two out of twelve teeth. 3. Compared with the standard measurements, the measurements with vernier calipers were apt to be larger at the upper first molar, and smaller at the lower first molar The computer measurements, however, were apt to be larger at both upper and lower first molars. 4. The measurements with vernier calipers showed the largest error at the lower first molar and the degree of error was variable according to the tooth while the difference of error was small in the computer measurements. 5. In the analysis for the correlation of the degree of measurement errors with the contact point deviation index and the mesio-distal crown angulation of each tooth, the measurements with vernier calipers did not show significant correlation while the measurements with computer showed slight Positive correlations. The results of this study indicate that a computer system may be useful for the measurement of tooth size in the model analysis.

• Proceedings of the Korea Contents Association Conference
• /
• 2019.05a
• /
• pp.275-276
• /
• 2019

The purpose of this study was to assess condylar size in volumetric 3D imaging in patients with class I, class II, class III malocclusions. To evaluate the differences among the three experimental groups, the condylar values of men were analyzed. There was a significant difference in the measured values of height. Among the three experimental groups, the condylar measurements in women showed significant differences in height and width. This study is expected to be used for determining the connection between malocclusion and condyle as a base line data.

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.247-254
• /
• 1996

This study was performed to evaluate the hyoid bone position and airway in skeletal class III malocclusion and to prove the correlation between airway, hyoid bone position and mandibular position. The sample, considered of 47 class III malocclusion patients for experimmtal group and 52 class I malocclusion students for control group. Twenty three linear and angular measurements about hyoid bone position, airway size, mandibular position were taken from the lateral cephalograms. The differences between skeletal class III malocclusion group and normal occlusion group were compared and the correlation were evaluated statistically. The results obtained were as follows, 1. There were significant difference in S-APH, A-APH, N-APH, LAH-PBR, AA-PNS, PNS-ad between class I and class III malocclusion groups. 2. The hyoid bone was more anteriorly positioned in class III malocclusion group than class I malocclusion group and skeletal airway size in class III malocclusion group was smaller than class I malocclusion group. 3. There were significant difference in several measurements especially vertical and angular measurements of hyoid bone position and airway size between male and female. Usually the measurements in male were larger than female. 4. There were no significant correlation between hyoid bone position and airway size also airway size, and didn't showe significant correlation with mandibular position, 5. S-APH showed negative correlation with Wits appraisal and A-APH, N-APH showed positive correlation with Wits appraisal. On the contrary vertical measurements of hyoid bone position showed positive correlation with lower facial height.

• Journal of Fashion Business
• /
• v.22 no.5
• /
• pp.32-40
• /
• 2018

Big breasted women often experience dissatisfaction with ready-made brassieres, that do not account for individual breast types nor provide adequate cup sizes. This study was conducted to provide basic information on common breast shape and measurements of Korean big-breasted women, and to facilitate development of big-breasted women's bras with excellent fit and comfort. The study analyzed direct upper body measurements of 178 women in their 20's whith cup size C or bigger in the 5th, 6th and 7th Size Korea. In addition, 3D body scan data of women with bra size 75 and cup size C were re-collected and their breast types were examined. Average under-bust circumference of big-breasted women was 75 size in brassiere size. The average stature was 159.78 cm and the body weight was 60.33kg, indicating "overweight". Also, it was revealed that common breast types of big-breasted women, were hemispheric and cone types. The study can facilitate better understanding of breast shapes and sizes of standard big-breasted women, and will be useful as reference in selection of subjects in future studies.

• Journal of Audiology & Otology
• /
• v.24 no.1
• /
• pp.17-23
• /
• 2020

Background and Objectives: We aimed to measure the head dimensions on computed tomography (CT) images, to compare them to directly measured head dimensions, and to predict a new parameter of bone thickness for aiding bone conduction implant (BCI) placement. Subjects and Methods: We reviewed the facial and mandibular bone CT images of 406 patients. Their head sizes were analyzed using five parameters included in the 6th Size Korea project, and they were divided into age groups (ranging from the 10s to the 80s). We compared the head length, head width, sagittal arc, bitragion arc, and head circumference in the CT and Size Korea groups. We also added the parameter bone thickness for aiding BCI placement. Results: All the head size parameters measured using CT were significantly smaller than those measured directly, with head length showing the smallest difference at 7.85 mm. The differences in the other four parameters between the two groups according to patient age were not statistically significantly different. Bone thickness had the highest value of 4.89±0.93 mm in the 70s and the lowest value of 4.10±0.99 mm in the 10s. Bone thickness also significantly correlated with head width (p=0.038). Conclusions: Our findings suggested that the CT and direct measurements yielded consistent data. Moreover, CT enabled the measurement of bone sizes, including bone thickness, that are impossible to measure directly. CT measurements may complement direct measurements in the Size Korea data when used for developing bone conduction hearing devices (BCIs and headsets) for the Korean population.

• Korean Journal of Audiology
• /
• v.24 no.1
• /
• pp.17-23
• /
• 2020

Background and Objectives: We aimed to measure the head dimensions on computed tomography (CT) images, to compare them to directly measured head dimensions, and to predict a new parameter of bone thickness for aiding bone conduction implant (BCI) placement. Subjects and Methods: We reviewed the facial and mandibular bone CT images of 406 patients. Their head sizes were analyzed using five parameters included in the 6th Size Korea project, and they were divided into age groups (ranging from the 10s to the 80s). We compared the head length, head width, sagittal arc, bitragion arc, and head circumference in the CT and Size Korea groups. We also added the parameter bone thickness for aiding BCI placement. Results: All the head size parameters measured using CT were significantly smaller than those measured directly, with head length showing the smallest difference at 7.85 mm. The differences in the other four parameters between the two groups according to patient age were not statistically significantly different. Bone thickness had the highest value of 4.89±0.93 mm in the 70s and the lowest value of 4.10±0.99 mm in the 10s. Bone thickness also significantly correlated with head width (p=0.038). Conclusions: Our findings suggested that the CT and direct measurements yielded consistent data. Moreover, CT enabled the measurement of bone sizes, including bone thickness, that are impossible to measure directly. CT measurements may complement direct measurements in the Size Korea data when used for developing bone conduction hearing devices (BCIs and headsets) for the Korean population.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.3
• /
• pp.157-164
• /
• 2023

The purpose of this study is to compare and analyze bust point information presented in literature and the 8th Korean Anthropometric Survey (Size Korea 2021) as a basis for pattern making for Korean adult women. Therefore, the the bust point position was analyzed through the length from the side neckline to the bust point and the horizontal length from the bust point to the chest. The results are as follows. First, Size Korea's population shows an increase in bust circumference and Side Neck Point to Bust Point with age, with the largest Bust-Point Breadth in the 30s, followed by the 20s, 40s, 60s, and 50s. Second, the Bust-Point Breadth in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee, which were created from the bust circumference measurements of Size Korea's population, was wider than the measurements, and the difference was verified as a highly significant. Third, in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee created with the bust circumference dimensions of Size Korea's population, the length of Neck Point to Bust Point was shorter than the measured value, and the difference was highly significant. Fourth, the Bust-Point Breadth and Neck Point to Bust Point in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee, which were created with the bust circumference of the population of Size Korea by age, were analyzed in different age groups and showed significant differences from the measurements of Size Korea.

• The International Journal of Costume Culture
• /
• v.8 no.1
• /
• pp.43-50
• /
• 2005

This research analyzed the anthropometric data for Filipino plus-size women. The study aims to identify key dimensions used for the sizing system that can improve on fit and style concerns/issues for the plus-sizes. This study also develop a reference of body measurements for Filipino plus-size women from the data collected. The data was collected from subjects residing or working in the University of the Philippines and within Metro Manila. The full figure body shapes have been derived from the raw anthropometric data. The pear and the barrel shapes were derived figure types based on the anthropometric data collected. These body types show that weight distribution is on the lower torso for the pear and the upper torso for the barrel.